BMW Engine Parts for BMW 6 Series F12 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

ECS - Corporate Logo
T#:361057
Part#: 002201ECS01A
In Stock
Sale - Save 25% $ 38.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 38.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.24 USD
Free Shipping on orders $49 and up
Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:557934
Part#: VTT-S55-CBC
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

OEM INA Accessory Belt Tensioner Assembly - N55 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:394063
Part#: 11288604266
In Stock
$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less

ECS - Corporate Logo
T#:584114
Part#: 003779ECS10
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

Show More Show Less
ECS - Corporate Logo
T#:363147
Part#: 003296ECS01
Ships on Sep 24, 2026
Sale - Save 25% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
Sale - Save 25%
$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.

Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
Ships in 1-2 days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
OEM INA Deflection Pulley - N55 3.0L, S55 3.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554453
Part#: 11288673720
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

ECS - Corporate Logo
T#:5858461
Part#: 8PK1390
In Stock
$ 52.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287628661 Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:638889
Part#: VTT-CRANKGUARD
In Stock
Starting at $ 89.99 USD
Free Shipping
Starting at $ 89.99 USD
Free Shipping
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less
ECS - Corporate Logo
T#:383333
Part#: 003779ECS06KT
In Stock
Sale - Save 25% $ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD
Free Shipping on orders $49 and up
If you don't wish to fabricate intricate brackets to mount your ECS Baffled Oil Catch Can we have the solution. ECS's three-piece bracket kit includes two options for securing the catch can. Choose from either a flat parallel mounting plate or a bent 90° mounting plate to give you 360° rotation for an infinitely adjustable mounting location.
Show More Show Less
ECS Tuning Low Temp Oil Thermostat - BMW N54 N55 3.0L (2008+ Models) ...
For vehicles with a stock oil cooler
For 2008 and up models only
ECS - Corporate Logo
T#:6924321
Part#: 090743ECS09
In Stock
Sale - Save 25% $ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 59.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 59.99 USD
Free Shipping on orders $49 and up
Is your N54/N55 oil temp running too high? The most likely cause is a faulty OE oil thermostat. With this ECS Low Temp Oil Thermostat Kit, you can keep your engine happy with oil temps holding between 194F (90c) to 230F (110c). This is the perfect solution for both higher milage models and models that have been tuned or further upgraded with performance turbochargers, Kit includes: Oil Thermostat Bung Oil Thermostat Spring Oil Thermostat Shaft Assembly
Show More Show Less


ECS - Corporate Logo
T#:641063
Part#: 006060LA01
In Stock
Sale - Save 25% $ 183.99

This product was last offered at the strikethrough price on
06-14-2026

$ 137.99 USD
Free Shipping
Sale - Save 25%
$ 183.99

This product was last offered at the strikethrough price on
06-14-2026

$ 137.99 USD
Free Shipping
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 19mm hex post on the top. 19mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
Ships in 1 Business Day
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD
Free Shipping
$ 939.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

OEM INA Idler Pulley -- N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:402395
Part#: 11287615130
In Stock
$ 35.34

This product was last offered at the strikethrough price on
05-06-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5309605
Part#: VTT-COIL-N5X-BLU
In Stock
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5309610
Part#: VTT-COIL-N5X-RED
Ships in 10 Business Days
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

ECS - Corporate Logo
T#:7355613
Part#: 008648LA01
In Stock
Sale - Save 25% $ 61.99

This product was last offered at the strikethrough price on
06-14-2026

$ 46.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 61.99

This product was last offered at the strikethrough price on
06-14-2026

$ 46.49 USD
Free Shipping on orders $49 and up
Designed using durable silicone and billet aluminum to greatly outlast the OE rubber and plastic combination.

Vargas Turbo Technologies - Corporate Logo
T#:22196341
Part#: VTTS55CLCNV
Ships in 10 Business Days
Starting at $ 335.99 USD
Free Shipping on orders $49 and up
Starting at $ 335.99 USD
Free Shipping on orders $49 and up
VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**
Show More Show Less

ECS - Corporate Logo
T#:2706140
Part#: 008664LA01
In Stock
Sale - Save 44% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.99 USD
Free Shipping on orders $49 and up
Sale - Save 44%
$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.99 USD
Free Shipping on orders $49 and up
Turn your oil drain plug into an effective metal particle filter! This drain plug has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from circulation.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122267
Part#: VTTFILTERCAPBLUE
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less


ECS - Corporate Logo
T#:23416511
Part#: 7PK1647
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287631824 and 11287565361 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less
ECS - Corporate Logo
T#:394202
Part#: 012016ECS03A
In Stock
Sale - Save 16% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD
Free Shipping on orders $49 and up
Sale - Save 16%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD
Free Shipping on orders $49 and up
ECS - Corporate Logo
T#:398953
Part#: 012016ECS0KTKT
In Stock
Sale - Save 3% $ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD
Free Shipping on orders $49 and up

Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
Ships in 1 Business Day
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 3 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
ECS Tuning Baffled Oil Catch Can - 6oz
For use with custom plumbing and ECS universal mounting bracket kit
ECS - Corporate Logo
T#:17140141
Part#: 003779ECS05-01
In Stock
Sale - Save 46% $ 233.99

This product was last offered at the strikethrough price on
05-03-2026

$ 126.78 USD
Free Shipping on orders $49 and up
Sale - Save 46%
$ 233.99

This product was last offered at the strikethrough price on
05-03-2026

$ 126.78 USD
Free Shipping on orders $49 and up

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

  • Efficient 4-chamber baffle system for maximum oil/air separation
  • Recirculated design reduces oil ingestion, promoting cleaner emissions
  • Durable 6061-T6 billet machined body with anodized black finish for longevity
  • Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
  • Serviceable design with removable baffle plates for cleaning
  • Easy installation with customizable mounting options and leak-free fittings
  • Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122280
Part#: TRIPLECAPRED1
Ships in 10 Business Days
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
ECS - Corporate Logo
T#:21933046
Part#: 8PK1478
In Stock
$ 66.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287628659 and 11287589365 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less

ECS - Corporate Logo
T#:13496655
Part#: 003779ECS05-02
In Stock
Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 215.09 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 215.09 USD
Free Shipping on orders $49 and up
Upgrade Your BMW with ECS Baffled Oil Catch Can

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

  • Key Features:
  • Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
  • Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
  • Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
  • Serviceable: Easily removable baffle plates and drain plug for cleaning.
  • Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
  • Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122281
Part#: TRIPLECAPCLR1
Ships in 10 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:8061334
Part#: VTT-N55-CRANKHUB
Ships in 10 Business Days
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships in 10 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:5122265
Part#: VTTFILTERCAPRED
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122279
Part#: TRIPLECAPBLK1
Ships in 10 Business Days
$ 220.99 USD
Free Shipping
$ 220.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships in 10 Business Days
$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

ECS - Corporate Logo
T#:585258
Part#: 11247628034WPCKT
Ships on Aug 14, 2026
Sale - Save 3% $ 803.88

This product was last offered at the strikethrough price on
06-14-2026

$ 779.76 USD
Free Shipping
Sale - Save 3%
$ 803.88

This product was last offered at the strikethrough price on
06-14-2026

$ 779.76 USD
Free Shipping

BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set

Ensure optimal engine performance with the BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set. This genuine BMW rod bearing set, treated with WPC technology, is specifically designed for BMW N54 and N55 engines, providing several benefits for engine longevity and reliability. Engineered with precision and quality in mind, it offers:

  • Enhanced durability and wear resistance for extended engine life
  • Reduced friction and heat buildup for improved engine performance
  • WPC treatment for superior lubrication and protection against metal-to-metal contact
  • Genuine BMW quality and reliability for peace of mind

Upgrade your BMW N54 or N55 engine with this high-quality rod bearing set for enhanced performance and longevity.

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122282
Part#: TRIPLECAPBLUE1
In Stock
$ 251.99 USD
Free Shipping
$ 251.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.
Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.

ECS - Corporate Logo
T#:341297
Part#: 003402ECS06A-05
In Stock
Sale - Save 25% $ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD
Free Shipping on orders $49 and up

Upgrade your Mini Cooper's hose clamping mechanism with the 3/8" (9mm) Band Hose Clamp from ECS. Designed for precision and durability, this clamp ensures a secure fit for hoses, preventing leaks and ensuring optimal performance. Crafted to meet high-quality standards, it provides reliable sealing and resilience against varying temperatures and pressures. Easy to install and engineered for long-term use, this hose clamp is an essential addition to maintain your Mini Cooper's functionality.

  • Precision-engineered for Mini Cooper hoses
  • Ensures a secure and leak-free fit
  • Resilient against temperature and pressure variations
  • Easy to install and durable for long-term use
Show More Show Less

OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Hydraulic valve lifter
ECS - Corporate Logo
T#:377877
Part#: 003402ECS07A-05
In Stock
Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD
Free Shipping on orders $49 and up

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

  • Made of durable 304 stainless steel for long-lasting performance
  • German-style T-bolt design for easy size adjustment
  • Convenient band widths for versatile applications
  • Quality alternative to dealership pricing
Show More Show Less
ECS - Corporate Logo
T#:341279
Part#: 003402ECS05A-11
In Stock
Sale - Save 55% $ 14.99

This product was last offered at the strikethrough price on
02-13-2026

$ 6.74 USD
Free Shipping on orders $49 and up
Sale - Save 55%
$ 14.99

This product was last offered at the strikethrough price on
02-13-2026

$ 6.74 USD
Free Shipping on orders $49 and up

1/2"/12mm Band Hose Clamp

For reliable hose fastening, opt for the top-tier 1/2"/12mm Band Hose Clamp. Engineered for durability and versatility, this hose clamp ensures secure connections in various applications. Invest in quality and maintain optimal functionality with this essential accessory.

  • Versatile clamp suitable for various hose sizes
  • Durable construction ensures long-lasting performance
  • Provides a secure seal for optimal functionality
  • Easy to install and adjust for convenience
Show More Show Less


ECS - Corporate Logo
T#:585946
Part#: 11127531224WPC
In Stock
$ 916.99 USD
Free Shipping
$ 916.99 USD
Free Shipping
A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.
Show More Show Less
ECS - Corporate Logo
T#:372427
Part#: 91290A231
In Stock
Sale - Save 80% $ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD
Free Shipping on orders $49 and up
Sale - Save 80%
$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD
Free Shipping on orders $49 and up

Allen Head Bolt

Upgrade your fastening needs with the Allen Head Bolt, a versatile and reliable solution for various applications. Crafted from high-quality materials, these bolts offer exceptional strength and durability. Their allen head design ensures secure tightening and easy access, making them ideal for automotive, construction, and DIY projects. Elevate your projects with the precision and reliability of Allen Head Bolts.

  • High-quality materials for exceptional strength
  • Secure tightening with allen head design
  • Versatile usage for automotive, construction, and DIY projects
  • Reliable and durable solution for various applications
Show More Show Less