Oiling System for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:222522
Part#: 11128655331
In Stock
8% off MSRP $ 28.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.85 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 28.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.85 USD
Free Shipping on orders $49 and up
Genuine BMW Cap For Oil Filler - 11128655331

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24145950
Part#: B48LMTTOSKT
In Stock
$ 96.99 USD
Free Shipping on orders $49 and up
To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring
Show More Show Less
Genuine BMW - Corporate Logo
T#:48539226
Part#: 11425B4C845
In Stock
7% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD
Free Shipping on orders $49 and up
Ensure the longevity and performance of your BMW's engine with genuine BMW oil filters, the most crucial component of your oiling system. These filters effectively prevent contaminants from causing premature failure, ensuring your engine remains in peak condition for years. Discover the benefits of choosing BMW oil filters: Vital for preventing contaminants from damaging the engine. Genuine BMW quality for optimal performance and longevity. Guards against small metal particles that can lead to rapid component wear. Essential for maintaining the freshness and efficiency of the engine. Filters out harmful contaminants to prevent engine damage.
Show More Show Less

Genuine BMW Oil Pressure Sensor
For vehicles equipped with "High Speed Synchronisation" (S840A = Yes)
Genuine BMW - Corporate Logo
T#:14866
Part#: 12617592532
In Stock
2% off MSRP $ 66.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.83 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 66.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.83 USD
Free Shipping on orders $49 and up
This sensor is responsible for constantly monitoring the engine oil pressure and warning the driver in the event of a problem or drastic drop in pressure.

Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less
Genuine BMW - Corporate Logo
T#:215836
Part#: 11428575211
In Stock
25% off MSRP $ 26.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.15 USD
Free Shipping on orders $49 and up
25% off MSRP
$ 26.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.15 USD
Free Shipping on orders $49 and up


Genuine BMW Set Oil-Filter Element - 11428575211


Genuine BMW - Corporate Logo
T#:22284
Part#: 11427525334
In Stock
2% off MSRP $ 54.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 54.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
If your oil filter housing cap is cracked or stripped, replace it with a fresh one from BMW.
Genuine BMW - Corporate Logo
T#:31758
Part#: 11132210959
In Stock
5% off MSRP $ 71.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 71.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
Genuine BMW oil pan bolt set that is required when replacing an oil pan gasket.

Genuine BMW - Corporate Logo
T#:34948
Part#: 11412165397
In Stock
$ 42.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
$ 32.99 USD
Free Shipping on orders $49 and up
This kit includes all the hardware necessary for installing your BMW oil pump. These genuine BMW screws are made from aluminum to minimize corrosion and enhance durability. Genuine BMW Set Of Aluminium Screws Oil Pump - This item fits the following BMW Chassis: E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36 Fits BMW Engines including: N55
Show More Show Less

Genuine BMW - Corporate Logo
T#:34988
Part#: 11417519870
Ships in 3 Business Days
3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up


Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less
Packaged by Turner - Corporate Logo
T#:30031507
Part#: N54N55LTKT1
Back Ordered
Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less
Genuine BMW - Corporate Logo
T#:30744
Part#: 11117506546
In Stock
11% off MSRP $ 42.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.90 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 42.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.90 USD
Free Shipping on orders $49 and up

Upgrade your BMW's performance with the Genuine BMW Injection Valve - 11117506546.

Designed for precision and reliability, this injection valve ensures optimal fuel delivery, enhancing engine efficiency and power. Trust Genuine BMW parts for seamless integration and long-lasting performance.

  • Enhances engine efficiency
  • Optimizes fuel delivery for improved performance
  • Genuine BMW quality ensures reliability and durability
  • Designed for seamless integration with BMW vehicles


Genuine BMW Injection Valve
This item fits the following BMW Chassis:
E60 M5,E63 M6,E82 1M Coupe,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55,S65,S85

Show More Show Less


OEM Hengst Engine Oil Filter Kit - Pack of 5 - N20 N52 N54 N55 ...
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!
Hengst - Corporate Logo
T#:567541
Part#: 11427566327
In Stock
$ 50.99 USD
Free Shipping on orders $49 and up
Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
Show More Show Less
Oil Filter Housing With Filter H811H
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Hengst - Corporate Logo
T#:39497971
Part#: 11428583895
In Stock
$ 208.99 USD
Free Shipping on orders $49 and up
$ 208.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:389825
Part#: 11428678840
In Stock
2% off MSRP $ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping on orders $49 and up
This oil supply line to the turbocharger is an updated design that incorporates a check valve. It's a new design after BMW found that some 328/528 cars had oil leaking into the exhaust which caused blue smoke on a cold start. The new design fixes the problem with the check valve. If you have blue smoke on startup in your F30 328 or F10 528 BMW will replace your original line with this new one (check with BMW before ordering, they may cover its replacement cost).
Show More Show Less

MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less

Genuine BMW - Corporate Logo
T#:199622
Part#: 11427634186
Ships in 1-2 days
9% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up

Genuine BMW Oil Spraying Nozzle - 11427634186 - i12 i8 is the perfect replacement part to ensure your BMW i8 engine runs efficiently and smoothly. Specifically designed for the BMW i12 i8 model, this high-quality oil spraying nozzle improves oil distribution to critical engine components, reducing wear and enhancing performance.

Turner Motorsport offers this genuine OEM part to keep your BMW performing at its peak. With precise engineering and optimal functionality, it’s essential for maintaining engine reliability and longevity.

  • Genuine BMW part, ensuring perfect fit and compatibility with BMW i12 i8 models
  • Enhances engine performance by optimizing oil flow to key components
  • Reduces engine wear and prolongs engine life through improved lubrication
  • OEM replacement, maintaining your vehicle’s value and ensuring manufacturer standards
  • Simple installation for professional or DIY repairs
Show More Show Less
Genuine BMW - Corporate Logo
T#:401536
Part#: 11418091535
In Stock
4% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.80 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.80 USD
Free Shipping on orders $49 and up

MMX Oil Filler Cap - Black
For Most BMW Models 2007 Onwards or Mini Models
MMX Performance - Corporate Logo
T#:4552062
Part#: MMR03-0102-BL
In Stock
$ 127.99 USD
Free Shipping on orders $49 and up
MMX's Performance billet oil filler cap machined from billet T-6061 aluminum has been designed to instantly give your engine bay an subtle aesthetic upgrade. This cap comes in a Black finish. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur. Reusing of original seal is required.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Genuine BMW - Corporate Logo
T#:7036580
Part#: 11427926064
In Stock
7% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.99 USD
Free Shipping on orders $49 and up
Turner Motorsport is proud to offer you a full catalog of all Genuine BMW parts. This part is a Genuine BMW replacement oil filter cap for your B58 engine. If you are looking for an aluminum replacement, we also carry the ECS Tuning Billet Aluminum Oil Filter Housing Cap
Show More Show Less

Genuine BMW - Corporate Logo
T#:31838
Part#: 11137627511
In Stock
13% off MSRP $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD
Free Shipping on orders $49 and up


Genuine BMW Profile-Gasket -
This item fits the following BMW Chassis:
F10,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less
Genuine BMW - Corporate Logo
T#:34782
Part#: 11377583786
In Stock
2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Spraying Nozzle -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less
Paradigm Engineering - Corporate Logo
T#:5269543
Part#: OILCAPB58BLACK
Ships in 5 Business Days
$ 99.99 USD
Free Shipping on orders $49 and up
Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:24344808
Part#: N54OFHGKT
In Stock
Sale - Save 4% $ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD
Free Shipping on orders $49 and up
If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.
Show More Show Less
Genuine BMW - Corporate Logo
T#:384694
Part#: 11428583895
In Stock
5% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD
Free Shipping on orders $49 and up
Includes housing, gasket, filter and cap
Genuine BMW - Corporate Logo
T#:27905105
Part#: 11428583895KT
Ships in 3 Business Days
$ 964.99 USD
Free Shipping on orders $49 and up
$ 964.99 USD
Free Shipping on orders $49 and up
BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Genuine BMW Engine Oil Filter Housing - Includes a new cap, seals, and oil filter (oil cooler not included and must be reused or purchased new - see BMW # 11428583901) Oil Cooler Mounting Hardware Oil Drain Plug Gasket Intake Manifold Gaskets Throttle Body Gasket Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.
Show More Show Less

Genuine BMW - Corporate Logo
T#:201025
Part#: 11418600425
Ships in 1-2 days
3% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up


Genuine BMW Sprocket -
This item fits the following BMW Chassis:
i12 i8


Genuine BMW - Corporate Logo
T#:35411
Part#: 11427598003
Ships in 3 Business Days
4% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD
Free Shipping on orders $49 and up
Genuine BMW Oil Spraying Nozzle. These sometimes break and fall into the oil pan.
Genuine BMW - Corporate Logo
T#:190636
Part#: 11428507685
Ships in 1-2 days
6% off MSRP $ 48.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 48.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Filter Cover -
This item fits the following BMW Chassis:
F15,F25 X3,F30,F31

Fits BMW Engines including:
N57N


Genuine BMW - Corporate Logo
T#:199542
Part#: 11417603574
Ships in 1-2 days
Sale - Save 5% $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.94 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 55.99

This product was last offered at the strikethrough price on
06-25-2026

$ 52.94 USD
Free Shipping on orders $49 and up


Genuine BMW Suction Pipe -
This item fits the following BMW Chassis:
F10,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less
Genuine BMW - Corporate Logo
T#:14122760
Part#: 11418482270
Ships in 5 Business Days
13% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up

Packaged by Turner - Corporate Logo
T#:27905122
Part#: 11428583895TKT
Ships in 3 Business Days
$ 540.99 USD
Free Shipping on orders $49 and up
$ 540.99 USD
Free Shipping on orders $49 and up
BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Bremmen Engine Oil Filter Housing - Includes a new cap, seals, oil cooler, and oil filter Genuine BMW Oil Cooler Mounting Hardware Genuine BMW Oil Drain Plug Gasket Elring Intake Manifold Gaskets Elring Throttle Body Gasket Bav Auto Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:20023486
Part#: 11137854463KT
Ships in 5 Business Days
$ 3,524.99 USD
Free Shipping on orders $49 and up
One major drawback of the N55 engine is the oil pump and pan design. While great for street driven vehicles, this design falls short when tracking your BMW. Due to the design of the N55 oil pan and pump, higher G-loads experienced when cornering can lead to oil starvation and pressure drop, potentially leading to bearing damage and more. By upgrading to the S55 oil pan and pump design that BMW utilizes in both their standard M4 and Motorsport M4 GT4 models, you can prevent the possibility of oil starvation! The dual pump design used on the S55 engine installs onto the N55 engine easily and without the need for any major modification to the stock block or windage tray. Thanks to the addition of a scavenging pump, oil pressure and delivery are maintained under all aggressive driving conditions, even when the oil supply is not consistent from the main oil pump.
Show More Show Less
MMX Performance - Corporate Logo
T#:4552049
Part#: MMR03-0502-KP
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less
MMX Performance - Corporate Logo
T#:29035359
Part#: MMR17-1502
Special Order: No Guaranteed ETA
$ 81.99 USD
Free Shipping on orders $49 and up
Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.
Show More Show Less


OEM Hengst Oil Filter Kit - BMW N20 N55
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!
Hengst - Corporate Logo
T#:587757
Part#: 11427953125
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
Includes all necessary o-rings required during an oil service.
Genuine BMW - Corporate Logo
T#:35365
Part#: 11427540758
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up


Genuine BMW Asa-Bolt
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less
Genuine BMW - Corporate Logo
T#:35366
Part#: 11427540759
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up


Genuine BMW Asa-Bolt - M8X28
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW - Corporate Logo
T#:6488
Part#: 07119963151
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up
Replace your oil drain plug sealing washer ever oil change to prevent the chance of oil leaks and a stained driveway.

Genuine BMW - Corporate Logo
T#:35367
Part#: 11427540763
In Stock
$ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3.99 USD
Free Shipping on orders $49 and up
$ 3.99 USD
Free Shipping on orders $49 and up


Genuine BMW Asa-Bolt - M8X43
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less
Genuine BMW - Corporate Logo
T#:360588
Part#: 11137535106
In Stock
5% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.88 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.88 USD
Free Shipping on orders $49 and up

Need to replace your oil drain plug? Here is the original drain plug to ensure a tight fit and perfect seal!

Fits the following BMW's:
B58 B48 B46 B38 N55


Genuine BMW - Corporate Logo
T#:28583
Part#: 07119963132
In Stock
12% off MSRP $ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.12 USD
Free Shipping on orders $49 and up
12% off MSRP
$ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.12 USD
Free Shipping on orders $49 and up


Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F01,F02,F10,F12,F13,F15,F80 M3,F82 M4,F83,i12

Packaged by Turner - Corporate Logo
T#:41188174
Part#: 11137535106TKT
In Stock
Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD
Free Shipping on orders $49 and up
Includes a one time use crush washer.

Genuine BMW - Corporate Logo
T#:401546
Part#: 11427953129
In Stock
25% off MSRP $ 23.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.37 USD
Free Shipping on orders $49 and up
25% off MSRP
$ 23.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.37 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:20467
Part#: 64538387438
Ships in 2 Business Days
$ 3.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.74 USD
Free Shipping on orders $49 and up
$ 2.74 USD
Free Shipping on orders $49 and up


Genuine BMW Sealing Cap For Pressure Line
This item fits the following BMW Chassis:
E36 M3,E60 M5,E63 M6,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E36,E38,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12

Show More Show Less
Genuine BMW - Corporate Logo
T#:400704
Part#: 11427953125
In Stock
25% off MSRP $ 23.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.34 USD
Free Shipping on orders $49 and up
25% off MSRP
$ 23.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.34 USD
Free Shipping on orders $49 and up
Includes all necessary o-rings and required during an oil service.
OEM Hengst Engine Oil Filter Kit - N20 2.0L, N52 N54 N55 S55 3.0L ...
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!
Hengst - Corporate Logo
T#:567077
Part#: 11427953129
In Stock
$ 10.50 USD
Free Shipping on orders $49 and up
This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
Show More Show Less


Genuine BMW - Corporate Logo
T#:7169
Part#: 12611744292
In Stock
$ 9.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.99 USD
Free Shipping on orders $49 and up
$ 7.99 USD
Free Shipping on orders $49 and up
If you are replacing your oil level sensor for any reason, it is highly recommended that you replace this seal as well to prevent any future leaks. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Show More Show Less
Genuine BMW - Corporate Logo
T#:179879
Part#: 17217628761
In Stock
6% off MSRP $ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 66.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 66.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket For Coolant Pump, Electric -
This item fits the following BMW Chassis:
F22,F30,F32

Fits BMW Engines including:
N55