Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
 

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"

Please select your length below. 

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Features:

Bearing housing

• Precision CNC machined from 6061-T6 blue anodized aluminum
• Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
• CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

• OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance. 
• Improved road feel without undesirable NVH.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available separately here if you would prefer that option.

This item is an upgrade to the following rear wheel drive BMWs: 
2014+ F22 BMW 228i 230i M235i M240i - Coupe
2014+ F23 BMW 228i 230i M235i M240i - Convertible
2012+ F30 BMW 320i 328i 328d 335i 340i - Sedan 
2014+ F32 BMW 428i 435i 440i - Coupe 
2014+ F33 BMW 428i 435i 440i - Convertible 
2014+ F36 BMW 428i 435i 440i - Gran Coupe

Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.

• Combines pressure-based control with ride-height sensing technology for enhanced performance
• Features a brilliant TFT color display for intuitive control and monitoring
• Mobile app compatibility allows for easy adjustment of ride height and system settings via Bluetooth
• State-of-the-art manifold with a 32-bit processor for precise control over all four corners of your BMW
• Improved height sensor arm design for increased durability and longevity
• Show mode feature enables height management while the vehicle is off

Kit Features:

• Height + Pressure 3/8" Manifold
• Air Lift Black Anodized Aluminum Display
• Fully Integrated Wiring Harness That Also Incorporates Compressor Power
• Necessary Fittings, Hardware, and Connectors For a Complete Install
• Air Lift Automatically Draining Water Trap
• 60ft of 3/8" Air Line
• 3H Includes Rotational Height Sensors, Wiring, and Linkages
• FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely.

The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex.

Features:

Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction
Correct ball joint angle for full articulation
Clamp design allows for easy access to lock down your alignment settings
Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends
Multiple size stainless steel roll center spacers for precise adjustment

Modern BMW's are beginning to leave the performance derived handling and power delivery in the past as the demand for more comfort and features rises. The stiff suspension components designed around having the best driving experience from a luxury car has been left for the M models and replaced with soft rubber bushings and mounts. Unfortunately, this is a good move by BMW to support the masses.

The obvious approach was to offer products so the modern BMW can be upgraded into the car the enthusiast desires, superb handling, control, and a direct delivery of power to the rear wheels. When you upgrade to our Delrin subframe mounts you reconnect that power with almost zero negative feedback.

The added appeal to someone looking to take one of these machines on the race track is Delrin can be used when solid mounts are needed and aluminum is not an option with strict regulations found in??Grand-Am, BMW CCA, and other racing series.

Product features:

• Precision machined Delrin(TM) 150 bushings.
• Precision machined 6061-T6 aluminum inserts.?
• Class legal for any racing class that does not allow a solid subframe bushing.?

Performance Benefits:

• Eliminates subframe movement for more direct throttle and suspension? response.?
• Minimizes wheel hop due to subframe deflection and movement.?

?

***Installation Instructions***

These GAC differential bushings/mounts fit the following BMWs:?
2014+?F22 BMW?228i 228iX M235i M235iX?
2012+?F30 BMW?320i 320iX 328i 328iX 335i 335iX - Sedan?
2014+?F34 BMW?328i 328iX 335iX - Gran Turismo?
2014+?F32 BMW?428i 428iX 435i 435iX - Coupe?
2014+?F33 BMW?428i 428iX 435i 435iX - Convertible

2014+?F36?BMW?428iX -Gran Coupe?

When it comes to customizing your BMW, options matter. Elevate your air tank game with Air Lift aluminum tanks, offering a plethora of sizes, port configurations, and finishes. Choose from raw aluminum or polished finish for a sleek look. Alternatively, customize with your preferred powder coating or anodizing for a personalized touch. Enjoy the weight-saving benefits of aluminum, enhancing performance with faster lap times and improved weight distribution. With Air Lift Performance tanks, elevate your BMW's aesthetics and performance effortlessly.

Features:

• (2) 1/4" End Ports
• (2) 3/8" End Ports
• (1) 1/4" Drain Port
• 200 PSI Maximum Working Pressure
• Polished Aluminum Tank
• Dimensions: 30" L x 6" H x 7.5" H

Fitting packs (available separately):

• 1/4" V2 Management Fitting Pack - ES#2862251
• 3/8" V2 Management Fitting Pack - ES#2862252
• 1/4" Manual Management Fitting Pack - ES#2862264

Ensure optimal performance for your BMW's air suspension system with the reliable 444C Air Compressor. This compressor fills your supply tank efficiently, providing ample air to inflate your air bags and lift your suspension. With a 100% duty cycle and a rating of 200psi, this compressor offers uninterrupted operation and quick air inflation. Considered one of the best options available, it draws around 20 amps and weighs only 9.75 pounds each.

• 100% duty cycle for uninterrupted operation
• Rated at 200psi for quick air tank filling
• Draws around 20 amps for efficient performance
• Lightweight design at only 9.75 pounds each

BMW F22 F23 F30 F32 Front Performance Series Struts are engineered to enhance the driving dynamics of your BMW, offering a perfect blend of performance and comfort. Designed to meet the needs of discerning drivers, these struts provide precise adjustments for improved handling and a sportier stance.

• (2) Fully Threaded, Damping Adjustable Air Struts with Double Bellow Bags: Allows for customizable height adjustments and tailored damping for optimal ride quality and handling.
• (2) Black Anodized Camber Plates: Provides adjustable camber settings to enhance alignment and handling performance.
• (2) Damping Adjuster Knobs: Enables easy fine-tuning of rebound and compression settings to match your driving preferences.
• (2) Sway Bar End Links: Improves stability and reduces body roll, especially during aggressive driving.
• (2) Stainless Steel Braided Leader Lines: Offers durability and resistance to wear and tear.
• (4) DOT Approved Fittings - Both 1/4 PTC and 3/8 PTC: Ensures reliable and secure connections for the air suspension system.
• Spanner Tool: Included for convenient adjustment of the struts.
• Anodized End Caps: Adds style and protection to the struts.
• Corrosion-Resistant Paint on Strut Bodies: Enhances the longevity and appearance of the struts.
• All Required Mounting Hardware: Comes with everything needed for a complete installation.
• 1-Year Manufacturer Warranty: Provides assurance with a warranty against manufacturing defects.
• Detailed Installation Manual with Pictures: Guides you through the installation process for a straightforward setup.
• Up To 3.7" of Lowering: Offers significant lowering for an aggressive stance and improved handling.

Air Lift proudly introduces the revolutionary Air Lift Performance 3P pressure-based air suspension control system after three years of extensive development and testing. This system represents the pinnacle of their innovation.

Air Lift Performance 3P amalgamates pressure-based control with optional ride-height sensing technology, leveraging the advantages of both systems to instantly enhance suspension control, performance, and ride flexibility.

Key Specifications:

• Controller: Features a vibrant TFT color display with adjustable backlight, illuminated preset buttons, and full-color indicators for tank pressure, 4-corner active height, and pressure readings. It's encased in a black anodized CNC machined case, allowing customized mounting options with a Micro-USB port for power.
• Mobile App: Works seamlessly with the free mobile app, enabling Bluetooth-based ride height and system settings adjustments. Additionally, the app facilitates direct system software updates to the manifold and controller.

Kit Features:

• Pressure-based 1/4" Manifold
• Black Anodized Aluminum Display

Upgrade your BMW's air suspension system with the 444C Dual Pack Compressors from Turner Motorsport. These compressors feature a newly-developed intercooler head and stainless steel braided leader hose for enhanced durability and performance. Ensure reliable air supply for your BMW's suspension system with this comprehensive kit.

• Newly-developed intercooler head for improved performance
• Stainless steel braided leader hose with inline check valve for compressor protection
• Complete kit includes all necessary components for installation
• Enhances durability and reliability of your BMW's air suspension system

Kit Features:

• (2) 444C Black Compressors
• Patents Pending Intercooler Head
• (2) Air Filter Assemblies
• (2) Remote Mount Brackets
• (2) Sets of Remote Mount Fittings
• (2) Sets of Spare Air Filter Elements
• (8) Sets of Nuts, Bolts, Washers and Lock Washers
• (2) Stainless Steel Braided Leader Hoses with Inline Check Valve
• (6) Airline Clips

*Does not include relays, pressure switch or air line for remote air filter relocation

Introducing the Air Lift Performance 3S Air Management Kit

The Air Lift Performance 3S is a groundbreaking air management kit that takes performance to the next level. This kit includes a manifold and a basic wiring harness, providing the flexibility to be installed in conjunction with separately purchased components. It is compatible with both 1/4” and 3/8” air lines, offering various kit versions to cater to different displays and switch boxes or exclusive use with the ALP3 app. Whichever version you choose, seamless integration with the ALP3 app is guaranteed.

Components to be purchased separately include:

• Air springs
• Water trap
• Controllers (e.g., AVS switchbox)
• Fittings/air lines
• Compressor
• Insulated copper wires in 10-, 12-, 18-, and 20-gauge
• Tank wire, connectors, terminals, butt splices
• Pressure switch fuse/holders
• Relay
• Schrader valve and blow-off valve

Additionally, there are versions of the 3S kit available with the Air Lift Performance V2 or ALP3 controller or just the smartphone app for added convenience.