BMW Intake Parts for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
In Stock
$ 32.99 USD
Free Shipping on orders $49 and up
JB4 3.5 bar plug and play TMAP adapters
Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
Back Ordered
$ 179.00 USD
Free Shipping on orders $49 and up
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:556808
Part#: BMS-B48-INT-B
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less

TurboSmart - Corporate Logo
T#:20979724
Part#: TS-0223-1050
In Stock
10% off MSRP $ 350.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 315.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 350.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 315.99 USD
Free Shipping on orders $49 and up

The Turbosmart BOV Kompact EM Dual Port - BMW N20/N26 (VR23) offers an advanced blow-off valve solution designed specifically for BMW’s N20 and N26 engines. Engineered with premium materials, this bolt-on unit provides an ideal balance of performance and durability. By improving turbo response and boosting control, it maximizes power efficiency and prevents compressor surge, enhancing the life of your turbocharger system. Turner Motorsport offers this product as a direct replacement with easy installation and seamless compatibility for BMW enthusiasts looking to optimize performance.

  • Dual Port Venting: Allows for a combination of recirculation and vent-to-atmosphere options, enhancing flexibility.
  • Compact Design: Precision-engineered to fit neatly into tight engine bays while delivering maximum efficiency.
  • Plug-and-Play Installation: Designed as a direct OEM replacement, making installation straightforward.
  • Improved Throttle Response: Reduces lag and improves acceleration, creating a smoother driving experience.
  • Quality Construction: Made from high-grade aluminum alloy for durability and performance.

Upgrade your BMW’s turbo system with the Turbosmart BOV Kompact EM Dual Port, the trusted solution for performance enthusiasts.

Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171969
Part#: B58-ACP-TSBOV
In Stock
$ 599.99 USD
Free Shipping on orders $49 and up
$ 599.99 USD
Free Shipping on orders $49 and up

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Show More Show Less

Burger Motorsports - Corporate Logo
T#:51848519
Part#: G12B48CP
Ships on Aug 7, 2026
New Item
$ 299.00 USD
Free Shipping on orders $49 and up
$ 299.00 USD
Free Shipping on orders $49 and up
The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38688920
Part#: B58FINLET
Ships on Aug 7, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports B58 BMW Silicone Intake Pipe Upgrade optimizes airflow by removing the upper factory sound resonator and lower accordion section of the stock inlet pipe, ensuring a smoother transition from the intake to the turbo. Compatible with both the OEM BMW B58 intake and the Burger Motorsports F-Chassis B58 intake for enhanced performance.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:638811
Part#: VTT-B58-VACCUM
Ships in 10 Business Days
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less


TurboSmart - Corporate Logo
T#:27372081
Part#: TS-0204-1143
In Stock
$ 324.99 USD
Free Shipping on orders $49 and up

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less
TurboSmart - Corporate Logo
T#:8076768
Part#: TS-0204-1142
In Stock
$ 324.99 USD
Free Shipping on orders $49 and up
Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included) The Race Port is famous for being an amazingly small and light BOV for turbocharged competition level engines. Featuring our unique collar design and internal flow structures, it is 50% lighter and 25% smaller than the competition while flowing 330 CFM – making it the highest flowing BOV of its type on the market. Fits Chargepipes With Tial/Turbosmart Flange
Show More Show Less
TurboSmart - Corporate Logo
T#:27372080
Part#: TS-0204-1144
In Stock
$ 324.99 USD
Free Shipping on orders $49 and up

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less

Forge - Corporate Logo
T#:28271173
Part#: FMDV004S
Ships on Aug 14, 2026
$ 23.99 USD
Free Shipping on orders $49 and up

Forge - Corporate Logo
T#:46890669
Part#: FMEDV110R
Ships in 4 Business Days
$ 379.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.
Show More Show Less
TurboSmart - Corporate Logo
T#:27372078
Part#: TS-0204-1141
In Stock
$ 324.99 USD
Free Shipping on orders $49 and up

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less

Forge - Corporate Logo
T#:399581
Part#: FMKT135F20
In Stock
$ 182.99 USD
Free Shipping on orders $49 and up

Forge's silicone intercooler hose features a Fluorosilicone inner liner, proven to last with the use of coolants, Organic Acid Technology coolants, or air containing oil blowby.

This Forge product comes with a limited Lifetime warranty.

This product fits the following BMWs:
2014+ F22 M235i M235iX
2014+ F23 M235i 

Show More Show Less
Forge - Corporate Logo
T#:399574
Part#: FMDVF22A
In Stock at Vendor
$ 268.99 USD
Free Shipping on orders $49 and up

The stock valve on the N55 is prone to failure - the plastic often cracks, causing the valve to stop functioning altogether. 

This Forge valve unit is engineered with a piston, eliminating the diaphragm entirely. Additionally, the Valve is all aluminum - this is the solution to any failures associated with the OEM valve, making your N55 significantly more reliable. This unit retains the OEM ECU controlled valve actuation as well. Includes a plug and play harness that works with the OEM harness.

Turner Motorsport advises being cautious when removing the OEM recirculating valve; if the plastic is cracked, pieces could fall into the turbo upon removal causing serious damage.

This product fits the following BMWs:
2014+ F22 M235i M235iX
 

Show More Show Less

Forge - Corporate Logo
T#:399575
Part#: FMDVF22R
Ships in 4 Business Days
$ 268.99 USD
Free Shipping on orders $49 and up

The stock valve on the N55 is prone to failure - the plastic often cracks, causing the valve to stop functioning altogether. 

This Forge valve unit is engineered with a piston, eliminating the diaphragm entirely. Additionally, the Valve is all aluminum - this is the solution to any failures associated with the OEM valve, making your N55 significantly more reliable. This unit retains the OEM ECU controlled valve actuation as well. Includes a plug and play harness that works with the OEM harness.

Turner Motorsport advises being cautious when removing the OEM recirculating valve; if the plastic is cracked, pieces could fall into the turbo upon removal causing serious damage.

This product fits the following BMWs:
2014+ F22 M235i M235iX
 

Show More Show Less

Forge - Corporate Logo
T#:586966
Part#: FMBP3
Ships in 4 Business Days
$ 626.99 USD
Free Shipping on orders $49 and up
BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.
Show More Show Less
Forge - Corporate Logo
T#:399571
Part#: FMBP135F20-C
Ships on Aug 7, 2026
$ 325.00 USD
Free Shipping on orders $49 and up

Forge's full alloy replacement charge pipe features a CNC coupler - permanently resolving issues that accompany the stock plastic charge pipe that is prone to cracking and failure, often causing boost leaks and loss of power on the N55.

Features:

  • Powder coated black for durability
  • Increase throttle response / decrease turbo lag
  • Retain factory O-ring throttle lock flange and electronic diverter valve
  • CNC couplers for simple install and uninstall

This product fits the following BMWs:
2014+ F22 M235i M235iX

Show More Show Less
Forge - Corporate Logo
T#:399827
Part#: FMDVN20A
Ships in 4 Business Days
$ 300.99 USD
Free Shipping on orders $49 and up

It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less


Forge - Corporate Logo
T#:46890670
Part#: FMEDV110A
Back Ordered
$ 379.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.
Show More Show Less
Vaico - Corporate Logo
T#:41492597
Part#: 11127599753
Special Order: No Guaranteed ETA
$ 36.99 USD
Free Shipping on orders $49 and up
Replace your cracked or worn out breather hose on your N55
Burger Motorsports - Corporate Logo
T#:5108986
Part#: FB58FRONTMOUNT
Ships on Aug 7, 2026
$ 499.00 USD
Free Shipping on orders $49 and up
Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38789912
Part#: ELITEB58INTAKER
Back Ordered
$ 429.00 USD
Free Shipping on orders $49 and up
### **BMS Elite B58 Performance Intake – Superior Flow & Power** The **BMS Elite B58 Performance Intake** enhances airflow while preserving the best aspects of the OEM system, including **cold air ducting** and the **lightweight heat-shielded airbox base**. It upgrades the top section with **larger, high-flow ducting**, a **heatshield**, and a **premium BMS inverted cone air filter** for maximum performance. Available as a **standalone intake** or bundled with the **B58 Turbo Inlet** to maintain **consistent high airflow** all the way to the turbo. ### **Proven Performance Gains** 📈 **Dyno-tested** – Adds up to **10+ horsepower to the wheels at 25+ psi** ⚡ **Faster Turbo Spool** – Improved throttle response & enhanced performance 🔊 **Enhanced Sound** – Hear your **turbo spool** like never before! ### **Key Features:** ✅ **Increases horsepower & throttle response** ✅ **Outflows stock intake for better performance** ✅ **Includes an upper heat shield & retains OEM airbox base** ✅ **Keeps factory cold air ducting for optimal efficiency** ✅ **Premium cleanable & reusable air filter** – lasts the **lifetime of your car** ✅ **Quick, easy, and fully reversible installation** 🔧 **Made in the USA. Built for Power. Designed for Enthusiasts.** 🔥
Show More Show Less

Forge - Corporate Logo
T#:384540
Part#: FMDVN20R
Back Ordered
$ 344.99 USD
Free Shipping on orders $49 and up

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less
Forge - Corporate Logo
T#:370918
Part#: VC04R
Back Ordered
$ 15.99 USD
Free Shipping on orders $49 and up

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:49822565
Part#: BMSB585BS
Ships on Aug 7, 2026
New Item
$ 139.00 USD
Free Shipping on orders $49 and up
Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.
Show More Show Less
Burger Motorsports Performance Intake - Red Filter - F22 F87 2 Series...
For vehicles equipped with a manual transmission only
Burger Motorsports - Corporate Logo
T#:24677026
Part#: BMSF3XN55INTREDM
Ships on Aug 7, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
$ 249.00 USD
Free Shipping on orders $49 and up
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling! Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway! Features: Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Looks great under the hood Cleanable and reusable filter Made in the USA *Not for sale or use in the state of California.
Show More Show Less

Forge - Corporate Logo
T#:46890666
Part#: FMEDV104A
Ships in 8 Business Days
$ 379.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:51883658
Part#: G1B48CPBOV
Ships on Aug 7, 2026
New Item
$ 629.00 USD
Free Shipping on orders $49 and up
$ 629.00 USD
Free Shipping on orders $49 and up
Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.
Show More Show Less
Forge - Corporate Logo
T#:399580
Part#: FMINTBM135F20-C
Ships in 4 Business Days
$ 1,100.00 USD
Free Shipping on orders $49 and up

Forge's larger intercooler installs with no cutting or even removal of bumpers.

After a quick and simple install, you can expect temperature drops of 25 degrees Celsius. Lower temperatures leave room for more power and less heat soak thanks to a larger cooler charge. This intercooler features a bar and plate design core, featuring overall larger dimensions that improves cooling ability in comparison to the stock intercooler.

This product fits the following BMWs:
2014+ F22 M235i M235iX
2012+ F30 335i 335iX 
 

Show More Show Less
Forge - Corporate Logo
T#:46890667
Part#: FMEDV104R
Ships in 3 Business Days
$ 379.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:5108984
Part#: ELITEB58INTAKE
Ships on Aug 7, 2026
$ 429.00 USD
Free Shipping on orders $49 and up
The BMS Elite B58 Performance Intake outflows the OEM intake but retains everything that's good including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with larger higher flow ducting, a heatshield, and a quality BMS inverted cone air filter to match. Available alone or packaged with the B58 Turbo inlet maintaining that same high level of flow all the way to the turbo.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38789908
Part#: FB58FRONTMOUNTR
Ships on Aug 7, 2026
$ 499.00 USD
Free Shipping on orders $49 and up
Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks. In addition to freeing up power, turbo spool speed is greatly improved and there's an incredible sound improvement. You'll finally be able to hear your turbos spooling! The proprietary high flow inverted cone filters can be cleaned every 15-20k miles using a cleaning kit and will last the life of the car. FEATURES AND BENEFITS Adds up to 12+ Horsepower Dramatic sound improvement Unique look Improves throttle response Huge 3.5" mandrel-bent aluminum tubing Classy gloss black powder coat finish CNC Billet aluminum fittings Looks great under the hood Cleanable and reusable performance air filters Made in the USA
Show More Show Less
Forge - Corporate Logo
T#:5788178
Part#: FMINT135F20
Ships in 4 Business Days
$ 1,088.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's N55/N20 intercooler has been designed for the BMW vehicles with the N55 3.0 single turbo engine and N20 turbo engine. This intercooler has been designed to be a direct fit for OE with no further modifications to the bumper or body parts required. Forge has tested the intercooler with results indicating a temperature drop of 25 degrees, along with a moderate increase in power. Features: Forge designed and manufactured specifically for an engineered fit to your BMW Chassis. Utilizing a solid works designed high flow hand manufactured end tanks. High density bar & plate construction air core. A simple and easy direct bolt on to the OEM position. Includes all hardware needed to install.
Show More Show Less

Forge - Corporate Logo
T#:558490
Part#: FORGEVAC
Ships on Aug 11, 2026
Starting at $ 14.99 USD
Free Shipping on orders $49 and up
Starting at $ 14.99 USD
Free Shipping on orders $49 and up
Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

Forge - Corporate Logo
T#:370915
Part#: VC03R
Back Ordered
$ 14.99 USD
Free Shipping on orders $49 and up

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

  • High-quality silicone construction for durability
  • Superior flexibility for easy installation
  • Resistant to extreme temperatures
  • Ensures reliable vacuum pressure for efficient engine operation
  • Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 

Show More Show Less
Forge - Corporate Logo
T#:370917
Part#: VC04
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 

Forge - Corporate Logo
T#:370919
Part#: VC04B
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 6 Business Days
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less

Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less

Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Aug 7, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less


Burger Motorsports - Corporate Logo
T#:15744064
Part#: GEN1B58WIS
Ships on Aug 7, 2026
$ 99.00 USD
Free Shipping on orders $49 and up
Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters
Show More Show Less
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Aug 6, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less