Please ensure your correct model is selected
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!
Features:
BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.
In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**
Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.
Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.
The kit includes:
BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)
Forge's silicone intercooler hose features a Fluorosilicone inner liner, proven to last with the use of coolants, Organic Acid Technology coolants, or air containing oil blowby.
This Forge product comes with a limited Lifetime warranty.
This product fits the following BMWs:
2014+ F22 M235i M235iX
2014+ F23 M235i
The stock valve on the N55 is prone to failure - the plastic often cracks, causing the valve to stop functioning altogether.
This Forge valve unit is engineered with a piston, eliminating the diaphragm entirely. Additionally, the Valve is all aluminum - this is the solution to any failures associated with the OEM valve, making your N55 significantly more reliable. This unit retains the OEM ECU controlled valve actuation as well. Includes a plug and play harness that works with the OEM harness.
Turner Motorsport advises being cautious when removing the OEM recirculating valve; if the plastic is cracked, pieces could fall into the turbo upon removal causing serious damage.
This product fits the following BMWs:
2014+ F22 M235i M235iX
The stock valve on the N55 is prone to failure - the plastic often cracks, causing the valve to stop functioning altogether.
This Forge valve unit is engineered with a piston, eliminating the diaphragm entirely. Additionally, the Valve is all aluminum - this is the solution to any failures associated with the OEM valve, making your N55 significantly more reliable. This unit retains the OEM ECU controlled valve actuation as well. Includes a plug and play harness that works with the OEM harness.
Turner Motorsport advises being cautious when removing the OEM recirculating valve; if the plastic is cracked, pieces could fall into the turbo upon removal causing serious damage.
This product fits the following BMWs:
2014+ F22 M235i M235iX
It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.
Forge's full alloy replacement charge pipe features a CNC coupler - permanently resolving issues that accompany the stock plastic charge pipe that is prone to cracking and failure, often causing boost leaks and loss of power on the N55.
Features:
This product fits the following BMWs:
2014+ F22 M235i M235iX
In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B58 Engine - BMW 140 240 340 440 - (B58 Intake)**
This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.
Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.
Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.
Forge's larger intercooler installs with no cutting or even removal of bumpers.
After a quick and simple install, you can expect temperature drops of 25 degrees Celsius. Lower temperatures leave room for more power and less heat soak thanks to a larger cooler charge. This intercooler features a bar and plate design core, featuring overall larger dimensions that improves cooling ability in comparison to the stock intercooler.
This product fits the following BMWs:
2014+ F22 M235i M235iX
2012+ F30 335i 335iX
