Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.
High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.
Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.
Hassle-Free Installation:
All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Note 1:
Does NOT fit Convertible models.
Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This part fits the following BMWs:
F3X B58
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
01-28-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
01-28-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
01-28-2026
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
7" Tall Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.
High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.
Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.
Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Note 1:
Does NOT fit Convertible models.
Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure. Replace your leaking pressure pipe and stop loosing boost.
Product Features and Specifications:
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 21% and lowered the intake air temperatures.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection.
5" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory.
TIG-Welded:
100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.
Pressure Tested:
The BladeRunner Intercooler is test pressure rated at 200psi.
Cold Side Tube:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion. Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.
Perfect Fit:
Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.
Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (turbo) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (turbo) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20
Note: This intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
This product was last offered at the strikethrough price on
06-29-2026
This product was last offered at the strikethrough price on
06-29-2026
Reinforced Silicone:
These couplings feature high temperature 5-Ply polyester reinforced silicone material which meet or exceed SAEJ20 Standard.
Durable Couplings:
Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipe or other equipment break.
Note: This coupling kit fits aFe intercooler tube (46-20239-B, 46-20229-B/R, 46-20222-B) Only.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-27-2026