BMW Engine Parts for BMW 2 Series F23 (2015+)

N54/N55 Low Temp Oil Thermostat Kit - 70c

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Crank Bolt Capture Plate - BMW N55, S55

T#:48815416

Part#: 034-113-Z016

In Stock

$ 78.00 USD

Add to Wish List

Qty

$ 78.00 USD

Add to Wish List

Ease your mind and the strain on your N55 or S55's crank bolt by replacing it with this improved capture plate.

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 230i/330i/430i B46/B48 ...

T#:50899212

Part#: HW-446

Ships in 8 Business Days

Sale - Save 15% $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
07-10-2026

$ 110.49 USD

Add to Wish List

Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

Ships on Aug 5, 2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

URO Turbocharger Oil Feed Line - BMW N20 2.0L

T#:53079361

Part#: 11428678840

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Supplies oil to the turbocharger, ensuring proper lubrication of the bearings.

ReFlex+ Advanced I/O Integration - BMW B58/S58 Plug-n-Play - MOTIV/Vi...

T#:49648341

Part#: 910.1027

In Stock

$ 1,344.00 USD

Add to Wish List

Qty

$ 1,344.00 USD

Add to Wish List

NOTE: Select PT-CAN2 for all MHD+ and EcuTek cars with automatic transmissions. For BM3 and all manual transmission cars select PT-CAN.

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

URO Fuel Tank Vent Valve - 13907643106

T#:50031887

Part#: 13907643106

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Replaces broken or failing vent valve.

High-Pressure Fuel Pump & Fuel Filter - N54/N55

T#:50031899

Part#: 13518604231

Ships in 1-2 days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

The fuel pump is the lifeblood of your vehicle, delivering fuel to the engine to keep it running smoothly. If your fuel pump fails, this URO replacement provides a direct-fit solution. Additionally, if your fuel filter is clogged or contaminated, the entire fuel pump assembly should be replaced to ensure proper fuel flow and reliable performance.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 4 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Rein Turbo Charger Kit - B58

T#:53785545

Part#: TRK0025

Ships in 4 Business Days

$ 475.99 USD

Add to Wish List

Qty

$ 475.99 USD

Add to Wish List

Rein TechSelect Turbo Kits feature replacements to the OE Turbocharger, including brackets, hardware and gaskets.

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships on Aug 5, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Acoustic Cover - High-Pressure Pump

T#:53608864

Part#: 13515B940B9

In Stock

3% off MSRP $ 31.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

3% off MSRP

$ 31.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

MHD DME Unlocker - BMW B48 B58 S58 S63 (Pre-06/20)

T#:54852023

Part#: MHD-UNLOCKER

Ships on Aug 12, 2026

$ 373.99 USD

Add to Wish List

Qty

$ 373.99 USD

Add to Wish List

MHD Unlocker with a plug and play harness/connections - Simple and easy unlock at home in a few minutes!

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

URO Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

T#:50031925

Part#: 11128655331

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replaces broken or damaged oil filler cap.

OEM Bosch Fuel Injector Replacement Kit - BMW B46/B48 2.0L (Gen1 B46A...

T#:50031891

Part#: BB48AFIRKT

In Stock

$ 356.99 USD

Add to Wish List

Qty

$ 356.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

1-Piece, Pinned & Unpinned Crank Hub W/ Crank Bolt Capture Plate - BM...

T#:48815408

Part#: 034-113-Z015

In Stock

$ 819.00 USD

Add to Wish List

Qty

$ 819.00 USD

Add to Wish List

The factory crank hub is infamous for failure in the BMW N55 & S55 engines. Replace it with this assembly to protect your engine in the most extreme situations.

Fuel Tank Ventilation

T#:51848518

Part#: 13907636156

Ships in 4 Business Days

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

Aluminum Valve Cover - BMW N55 3.0L

T#:56110315

Part#: 11127570292MKT

In Stock

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

With Cap!

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

OEM Bosch Fuel Injector Replacement Kit - BMW B58 3.0L (Gen1 B58 / B5...

T#:50031893

Part#: BB58AFIRKT

In Stock

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Schwaben Piston Ring Specialty Toolset

T#:53361638

Part#: 3594SCH01AKT

In Stock

Sale - Save 7% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Qty

Sale - Save 7%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Whether you are building a high-performance engine or simply performing a routine rebuild, getting your piston ring end gaps and installation right is critical for optimal engine performance, compression, and longevity. Designed to meet strict standards, this comprehensive toolset provides everything you need to file, measure, and install piston rings safely without causing damage.

KIT CONTENTS

Schwaben Piston Ring Filer

Easily modify piston rings for OEM engine rebuilds and boosted applications Cuts quickly and smoothly, allowing you to easily avoid filing in excess Durable, bench-mountable construction with a long-lasting diamond abrasive wheel Piston Ring Installation Tool

Ensures even tension distribution during expansion Accommodates all pistons ranging from 60 mm to 175 mm in diameter Features an easy thumb-release locking mechanism for quick and secure operation Feeler Gauge Set

16 blades - 0.002-0.025 inch thickness measurements

Show More Show Less

Knock Sensor

T#:54388475

Part#: 13627636937

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Keep your ignition timing razor-sharp and your engine safe from destructive detonation. This replacement Knock Sensor acts as your engine's first line of defense, constantly listening for pre-ignition "pinging" or knocking.

Show More Show Less

Valve Cover - Aluminum

T#:56110317

Part#: 11127588412MKT

In Stock

$ 346.80 USD

Add to Wish List

Qty

$ 346.80 USD

Add to Wish List

Aluminum Valve Cover Hardware Kit - N55

T#:49508933

Part#: N55VCHWKT

In Stock

Sale - Save 11% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 16.96 USD

Add to Wish List

Qty

Sale - Save 11%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 16.96 USD

Add to Wish List

Hardware to replace the coarse-thread screws originally used to mount components to the plastic valve cover.

Factory and aftermarket valve covers are made from plastic and use coarse-thread screws designed specifically for plastic. When upgrading to an aluminum valve cover, this hardware can no longer be used, as it will not properly thread into aluminum.

This kit includes all necessary hardware required to mount the factory components onto your upgraded aluminum valve cover.

Included Hardware:

2 × M6 × 1.0 × 40 mm bolts

4 × M6 × 1.0 × 20 mm bolts

2 × M6 × 1.0 × 12 mm bolts

Show More Show Less

Pro-Line Injector And Glow Plug Grease - 20g

T#:49787695

Part#: 22243

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

Oil Pan Suction Pipe/ Baffle - N55

T#:50031882

Part#: 11417590736

In Stock

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

Ensure proper engine lubrication with a replacement Oil Pan Suction Pipe / Baffle, a vital internal component responsible for maintaining consistent oil pressure under all driving conditions. The suction pipe supplies oil from the pan directly to the oil pump, while the baffle manages oil movement during acceleration, braking, and cornering. With age and mileage, seals can harden and components can wear or crack, increasing the risk of oil pickup issues—especially on higher-performance or aggressively driven vehicles. Any disruption in oil supply can lead to pressure loss and accelerated engine wear. Manufactured to OE specifications, this suction pipe and baffle assembly is designed for correct fitment, sealing, and oil flow. It installs directly in place of the factory unit and is strongly recommended when servicing the oil pan or performing related engine work. Key Benefits: Maintains a consistent oil supply to the oil pump Helps prevent oil starvation during high-load or spirited driving Replaces aging or worn factory components Direct-fit design for straightforward installation Ideal preventative maintenance during oil pan or engine service

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

BMW B58 PCV Repair & Premium Oil Service Kit

T#:55749586

Part#: 83212365954KT13

In Stock

$ 218.99 USD

Add to Wish List

Qty

$ 218.99 USD

Add to Wish List

Fix the whistle, replace the brittle vent hose, and flush out the contaminated oil. This kit pairs the highly sought after PCV fix with a premium Liqui Moly Top Tec 6600 0W-20 oil service to give your engine a completely clean slate. When the integrated PCV diaphragm on your B58 tears, it causes a massive unmetered vacuum leak that pulls raw oil vapor directly into the combustion chambers. This doesn't just create a loud, embarrassing whistling noise at idle—it causes poor air/fuel mixtures that force raw, unburned fuel past the piston rings. This blow-by heavily dilutes your engine oil, destroying its ability to properly lubricate the bearings and timing chain. Fixing the PCV using this Bremmen repair kit (which saves you from buying an entirely new valve cover) is only half the battle. You absolutely must get that compromised oil out of the crankcase. This comprehensive service kit includes the Bremmen PCV repair cap, the fragile corrugated crankcase breather hose that almost always snaps during the repair process, and a complete premium oil change. We've included Liqui Moly Top Tec 6600 0W-20, which carries the strict BMW LL-17 FE+ approval. This ultra-modern, low-friction oil ensures instant lubrication to the turbocharger upon cold start while maximizing fuel efficiency. Paired with a fresh OEM Mann oil filter, this kit completely reverses the collateral damage of a PCV failure. Kit Includes: (1) PCV Valve Repair Kit (Replaces OE # 11121025447) (1) CCV / Crankcase Vent Hose (Replaces OE # 11157637521) (1) Liqui Moly Top Tec 6600 0W-20 Engine Oil - 7 Liters (BMW LL-17 FE+ Approved) (1) Hengst Oil Filter Kit with O-Rings (Replaces OE # 11428583898) (1) Oil Drain Plug with Crush Washer

Show More Show Less

Bosch Oxygen Sensor Set - Pre and Post Catalytic Converter - N55 ...

T#:55857772

Part#: 11787589475KT2

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Extreme exhaust heat and carbon buildup degrade your factory oxygen sensors over time, sending lazy data to your DME and robbing you of performance.

Ultimate BMW B58 PCV & Ignition Refresh Kit

T#:55713529

Part#: 11157637521KT

In Stock

$ 567.99

This product was last offered at the strikethrough price on
07-14-2026

$ 565.99 USD

Add to Wish List

Qty

$ 565.99 USD

Add to Wish List

When the integrated PCV diaphragm on your B58 engine tears, it does more than just create a loud whistling noise under the hood. The ruptured valve allows the engine to pull raw crankcase oil vapor directly into the intake manifold and combustion chambers. By the time you diagnose the PCV failure, your engine has likely been burning oil for hundreds of miles. This thick oil vapor heavily coats the spark plugs in carbon, leading to rough idles, hesitation, and misfires—even after the PCV vacuum leak is fixed. Furthermore, the extreme heat trapped near the firewall on the B58 architecture naturally degrades the ignition coils over time. This ultimate refresh kit is the definitive "while you're in there" solution. It utilizes the highly sought-after Genuine BMW PCV fix kit (allowing you to repair the valve without replacing the entire expensive valve cover) and pairs it with a fresh set of OEM spark plugs and ignition coils. We also include a brand-new Genuine BMW corrugated CCV breather hose, as the factory plastic line is notoriously brittle and almost always snaps when you attempt to move it out of the way during the PCV repair. Kit Includes: (1) PCV Valve Repair Kit (Replaces OE # 11121025447) (1) CCV / Crankcase Vent Hose (Replaces OE # 11157637521) (6) NGK Spark Plugs (Replaces OE # 12120040551) (6) Turner Ignition Coils (Replaces OE # 12138643360)

Show More Show Less

Shifter Rebuild Hardware Kit

T#:55209882

Part#: 07119905KT

Ships in 4 Business Days

$ 4.80 USD

Add to Wish List

Qty

$ 4.80 USD

Add to Wish List

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 4 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 6, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Rein Engine Mount - Left - BMW F2X, F3X

T#:52516259

Part#: AVE0760

Ships in 4 Business Days

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

The Rein Automotive AVE0760 Engine Mount is a precision-engineered replacement designed specifically for BMW's xDrive platforms.

Engine Mount - Left

T#:56110324

Part#: 22116856403

In Stock at Vendor

$ 115.00 USD

Add to Wish List

Qty

$ 115.00 USD

Add to Wish List

FrankenTurbo F800 Twin-scroll Hybrid Turbocharger - BMW F2X M135i, M2...

For vehicles with Pneumatic Wastegate (PWG)

T#:51391280

Part#: F800PWG-F2X

Ships in 3 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The F800 is FrankenTurbo's highest-capacity offering for the F2X N55 platform.

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 6, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

URO Turbo Coolant Return Line - BMW Gen1 B58 3.0L

T#:53079363

Part#: 11538666857

Ships in 2 Business Days

Sale - Save 5% $ 65.99

This product was last offered at the strikethrough price on
05-26-2026

$ 62.69 USD

Add to Wish List

Qty

Sale - Save 5%

$ 65.99

This product was last offered at the strikethrough price on
05-26-2026

$ 62.69 USD

Add to Wish List

Replacement coolant return hose running from the turbocharger to the auxiliary water pump.

Battery Tender Plus Advanced Battery Charging System

T#:49892371

Part#: BTT0210128

In Stock at Vendor

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

URO Crankcase Vent Valve Repair Kit - B58

T#:55713528

Part#: 11121025447

Ships in 2 Business Days

$ 222.99

This product was last offered at the strikethrough price on
07-08-2026

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

The URO Parts Crankcase Vent Valve Repair Kit is the smart technician's fix for the notorious BMW crankcase ventilation failures.

Mishimoto Ignition Coil, 4-Pack - BMW N20, N52, N54, N55, S54, S55 ...

T#:51075078

Part#: MMIG-BMW-0204

Ships in 4 Business Days

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

The Mishimoto BMW Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.

URO Exhaust Variable Valve Timing Sprocket - N20

T#:55749602

Part#: 11367583819

Ships in 2 Business Days

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

The variable valve timing system on modern BMW engines is critical for both daily street driveability and wide-open throttle performance. When the factory exhaust gear wears down, it compromises the responsiveness of your BMW powerplant.

Show More Show Less

Mishimoto Ignition Coils, 6-Pack - BMW M54, N20, N52, N54, N55, N62, ...

T#:51075072

Part#: MMIG-BMW-0206

Ships in 4 Business Days

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

The Mishimoto Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.

CTS Turbo B58 Turbo Heat Shield - BMW F-series/G-series B58 (B58A/B58...

T#:50899213

Part#: HS-360

Ships in 8 Business Days

15% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Qty

15% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Reduces radiant heat from the turbocharger and improves overall performance. Made from high-quality steel, this heat shield provides superior thermal protection, helping to lower intake air temperatures (IATs) and safeguard surrounding components from excessive heat.

Show More Show Less