BMW Performance Chips & Software for BMW X Series F26 (2015+)

MHD Wireless OBDII Wifi Flash Adapter V2 - BMW E, F, & G Chassis ...

T#:9126157

Part#: MHDWIRELESSV2

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The new MHD Wireless OBDII WiFi Flash Adapter V2 allows you to reliably load flash maps to your BMW including JB4 back-end flash maps faster and easier than ever before. Just pair it with your Android or Apple phone and plug it into the OBDII port when you want to flash or use any MHD features. Compatible with E, F, or G Chassis BMWs with the following engines: N54, N55, S55, B58, S58, S63, & N13

NOTE: Additional engines & vehicles may be supported with Non-MHD applications such as Bimmercode or xHP. If your engine is not listed above, please check with the app you intend to use for compatibility with your vehicle.

MHD Flash Adapter Features & Benefits

Compatible with the MHD Flashing Platform, BimmerCode, xHP, and many other wifi diagnostic apps

Load both MHD off-the-shelf maps and custom flash maps (available for limited applications - N54, N55, S55, B58, S58, S63, N13)

Faster flash times compared to wired OBDII cable

Uses Wifi for a reliable connection

Applications

E Chassis BMW

F Chassis BMW

G Chassis BMW

BimmerCode App & Info

All you need for coding your car with BimmerCode is one of the supported MHD OBD adapters and the BimmerCode phone app - https://bimmercode.app/

Show More Show Less

BM3 Wireless OBDII WiFi ENET CANBUS Flash Adapter - BMW F & G Cha...

T#:33746523

Part#: OBD2FA

Ships in 10 Business Days

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

Fastest flash times over ENET and CANBUS
Reliable and consistent connectivity
Ability to configure your own WiFi password.
- Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
Wireless CANBUS Support
- Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
- Enters ultra-low power mode if left plugged in consuming just ~20mA
OTA updates through the new bootmod3 app
Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
Manual Toggle switch to fully power down the adapter
Small form factor, considerably smaller than generic WiFi ENET adapters
No VIN locking, can be used on multiple vehicles

Vehicles Supported:

All BMW F and G series vehicles
2014+ Mini
2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

OEM factory diagnostics such as ISTA and ESYS
XHP App
Bimmercode App
Bimmerlink App
ProTool App
...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis &a...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 809.00 USD

Add to Wish List

Qty

$ 809.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

F/G Chassis Kies WiFi ENET Adapter

T#:4319895

Part#: KIES07-WIFI-AD

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

A Wireless ENET Adapter tool, powered directly by your OBD!

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

T#:20155613

Part#: BMSPBT-M

Ships in 8 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

DINANTRONICS Sport Performance Tuner - F-Chassis N20/N26/N55 Engines ...

5X Entries For Our Spin To Win Sweepstakes!

T#:394029

Part#: D440-0010

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

DINANTRONICS Sport Maximum Gains (N20): Up to 30 HP, 50 lb-ft of torque. DINANTRONICS Sport Maximum Gains (N55): Up to 30 HP, 40 lb-ft of torque. DINANTRONICS Sport is the boost controller for the masses. Its simple design/execution allows for easy installation/removal that can be performed in the blink of an eye and yields results you will be sure to feel and enjoy, from the get-go. Coupled with Bluetooth capabilities right out of the box that allows for user-controlled adjustability and a live boost monitor to keep track of the action.

Show More Show Less

Sprint Booster V3 Drive-by-Wire Enhancement Module For 2001+ BMW ...

T#:391871

Part#: SBBM1003

In Stock

Starting at $ 289.99 USD

Add to Wish List

Starting at $ 289.99 USD

Add to Wish List

When BMW began using the "Drive-by-wire" throttle system in 2001, a lot of people cringed. The Drive-by-wire system uses electronics to replace the mechanical cable throttle of the past. This means the electronics between the accelerator pedal and motorized throttle must interpret what your right foot does, and ultimately decides how the engine will respond. Although advanced in it's technology and engineering, many of us agree that the Drive-by-Wire equipped BMWs feel unresponsive and lack the crisp, sharp throttle response that older BMWs had with a traditional throttle cable. That's where the Sprint Booster comes in.

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Throttle Booster

5X Entries For Our Spin To Win Sweepstakes! Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:11693563

Part#: D440-1700

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

RaceChip XLR Throttle Controller With App Control - BMW

T#:4126650

Part#: 999981

Ships in 3 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements. App Control: RaceChip is the first company to offer throttle tuning together with app control. The combination gives you the easiest ever way of controlling your vehicle’s throttle response. RaceChip XLR connects directly with the RaceChip app on your smartphone via Bluetooth. If you already have a RaceChip chip tuning module in your car, XLR is the perfect add-on, and using them together is even easier – you can control both modules from the driver’s smartphone using the same app.

Show More Show Less

Burger Motorsports JB4 Tuner - F-Chassis N20 w/ Electronic Wastegate ...

For vehicles with electronic waste gate; not for sale or use in the state of California.

T#:600105

Part#: JB4-N20EW

In Stock

$ 529.00 USD

Add to Wish List

Qty

$ 529.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 50 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA!

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

RaceChip Tuning Module - N55 F Chassis

BMW used two different engine harnesses, please confirm if you have type A or B before ordering

T#:641521

Part#: RACECHIPN55

In Stock

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

BMW used two different engine harnesses, please confirm if you have type A or B before ordering. It’s sufficient to locate only one of the sensors because the plug type is always the same for both of them (pictured above in the second photo). Harness Type A - Third Photo/Harness Type B - Fourth Photo RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +51 HP +70 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +63 HP +88 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +77 HP +105 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.

Show More Show Less

Dinan Stage 1 Performance Engine Software Tune - BMW N55 F-Chassis ...

5X Entries For Our Spin To Win Sweepstakes! This Tune requires the customer's vehicle to be dropped off at our Wadsworth, Ohio facility and picked

T#:5858448

Part#: D900-N55-S1

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

Dinan has a long and storied past when it comes to engine tuning having introduced our first engine performance chip in the mid 80's - over 3 decades ago. From those early years with chips, followed by engine software and then to our own external control modules we have become experts in nearly every possible way to extract safe, reliable power from the factory powerplant. While we have long preferred the unheard of control and sophistication capable of being achieved from engine software, over the past 6 years that option was not one afforded to us. That changes now with the re-introduction to flash tuning for Dinan with the S55, and now, N55 engines. The start of the next generation of Dinan flash tunes, the N55 calibrations are held to the same principles of the past; performance, reliability, and safety. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the calibration is tested on the dyno and in the real world for durability and drivability. This generation of Dinan flash tunes does differ from the past however in that there are multiple octanes to choose from depending on your needs, desires or limitations. Whether you need a tune for 91 pump gas living in California or want to experience maximum performance on 104 octane race gas at the track or something in between, chances are Dinan has an option for you. The Dinan Stage 1 Performance engine software is designed for the N55 engine to yield maximum power (for a variety of different octanes), improve drivability, and remove the factory speed governor for unadulterated entertainment. Features: More Power: Max gains up to 95 WHP / 120 lb-ft of torque on the base N55 using 104 octane. Consult the performance charts for detailed data and additional octanes. Dinan Stage 1 performance software includes a limited lifetime warranty against defects in the software and provides free updates and reflashes as they become available. Labor or shipping charges are not included in the warranty and are at the discretion. Access to numerous octane calibrations depending on your needs (91, 93, and 104). Switching between mappings would require a reflash at a Dinan authorized dealer. The Dinan Dual Core Intercooler is recommended for improved performance gains, regardless of octane, across the entire power band (where applicable). Full map rescaling for drivability from idle to wide-open throttle and everywhere in between. Top speed governor removed. Sport Cooling mode in sport / manual modes. Retains all BMW factory engine damage safeguards and adds additional safety protections. Torque gains drastically improve acceleration. Hassle-free operation — Install and enjoy. COMPATABILITY NOTICE - BOX CODES The N55 engine and its multitude of variants account for several 100 unique box codes across various platforms. While Dinan has created files for a great number of these permutations, there is a chance you may have a box code that we have not seen. If this happens to be the case, Dinan will need to create a file for your vehicle. This process could take several days and multiple dealer visits. Neither the N55 based M2/X4 M40i nor N55 engines equipped with a pneumatic wastegate are supported with this version of software. D900-N55-S2 is specific to N55's with an electronic wastegate.

Show More Show Less

DINANTRONICS X Performance Tuner - BMW F22/23 F25/26 F3X Z4 N20/26 2....

5X Entries For Our Spin To Win Sweepstakes! For model years 2012-2018 only

T#:6181656

Part#: D440-0127

Ships in 10 Business Days

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors, it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long-term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Unlike its predecessor, however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry-level little brother, the DINANTRONICS SPORT, X connects to additional inputs and/or has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. Features: More Power: Max gains of up to +45 HP and +38 lb-ft TRQ (Crank); +39 HP and +34 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). App download/pairing process is detailed within the installation instructions located under the Tech Resources dropdown below. 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On-board diagnostics and factory safeguards maintained. Unaffected by dealer factory updates. Plug and play installation. 14-day satisfaction guarantee. 1 year limited warranty. NOTE: The DINANTRONICS X offers an array of different power levels (maps). These maps range from a bypass/stock setting at map 0 to a maximum power setting at map 7. The unit is shipped in map 5. This middle ground setting should be acceptable for all vehicle/engine configurations. However, you can adjust up or down as you see fit for your needs and/or modifications. Please note however that for each map level, we highly recommend the minimum fuel octane rating to run listed below. If you sense any unusual or unexpected behavior immediately turn down the map to a lower setting that did not exhibit the condition. MAP (S) / MINIMUM OCTANE 1-3 - 91 4-5 - 91/93 6 - 93 7 - 93+ *DINANTRONICS X does not carry the factory matching warranty that Dinan is known for. DINANTRONICS X's warranty is a 1-year, product-only warranty, that does not cover consequential damages or labor reimbursement. EMISSIONS NOTICE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Motiv ReFlex+

T#:29101668

Part#: 910.1001

Ships in 4 Business Days

$ 789.00 USD

Add to Wish List

Qty

$ 789.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

DINANTRONICS X Performance Tuner - N55

5X Entries For Our Spin To Win Sweepstakes!

T#:4182492

Part#: D440-0144

Ships in 5 Business Days

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Unlike its predecessor however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry level little brother, the DINANTRONICS SPORT, X connects to additional inputs and has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. NOTE(S): (1) Please refer to the recommended mapping notice below for important operating information.

Show More Show Less

RaceChip GTS Black With App Control - Harness Type B

T#:641529

Part#: 916736B

Ships in 3 Business Days

$ 658.00 USD

Add to Wish List

Qty

$ 658.00 USD

Add to Wish List

RaceChip XLR5 - BMW & MINI Cooper

T#:38688929

Part#: 999982BMW

Special Order: No Guaranteed ETA

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.

Show More Show Less

RaceChip Tuning Module - N55 F26 X4 M40i

T#:641501

Part#: RACECHIPM40I

In Stock

Sale - Save 76% $ 349.00

Starting at $ 83.76 USD

Add to Wish List

Sale - Save 76% $ 349.00

Starting at $ 83.76 USD

Add to Wish List

RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +46 HP +52 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +58 HP +65 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +69 HP +78 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.

Show More Show Less

Dinan Stage 2 Performance Engine Software Tune - BMW N55 F-Chassis ...

5X Entries For Our Spin To Win Sweepstakes! This Tune requires the customer's vehicle to be dropped off at our Wadsworth, Ohio facility and picked

T#:5858449

Part#: D900-N55-S2

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

NOTE: Stage 2 Engine Software is for use with the Dinan Big Turbo and Intercooler; optimizing performance and drivability from the combination. Stage 1 have you wanting more? Stage 2 Dinan performance engine tuning for 'F' chassis N55 platforms provides a new found level of exhilaration and enjoyment for you to enjoy. Taking advantage of supporting hardware (Dinan big turbo and an upgraded intercooler), the stage 2 engine calibration takes a significant step up in performance. Yielding nearly 40 WHP / 60 lb-ft of torque more on pump gas over stage 1 (over 70 WHP / 80 lb-ft of torque on race gas) the bump in power equates to a transformation akin to purchasing a completely different vehicle. While increases in power to this scale typically come at a cost to the engine's durability, this is typically due to improper calibrations that are simply after one goal regardless of engine health - maximum power. Dinan's stage 2 mappings when used in conjunction with supporting hardware are safe and reliable without sacrificing long-term reliability or performance. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. In most cases, Dinan software engineers also implement their own additional safety precautions in order to guarantee flawless performance that may not have been needed with factory power levels/programming. Protecting your BMW, while giving the most performance, is the definition of "Performance Without Sacrifice". To do just that, drivetrain and engine components are analyzed for strength, and then the calibration is tested on the dyno and in the real world for durability and drivability. This process has been a cornerstone of Dinan software development for decades and a major reason why Dinan performance tunes are often labeled as being the smoothest, factory-like solution in the marketplace. With factory-like reliability/safety and staggering performance, it's hard to find a reason not to upgrade to stage 2. That "new car" you always wanted is hidden right in front of you. Let Dinan give you the keys so you can enjoy it. Features: More Power. Max gains of 169 WHP / 206 lb-ft of torque over stock on 104 octane and in conjunction with the Dinan big turbo and an upgraded intercooler. Dinan Stage 2 performance software includes a limited lifetime warranty against defects in the software and provides free updates and reflashes as they become available. Labor or shipping charges are not included in the warranty. Access to numerous octane calibrations depending on your needs (91, 93, 100, and 104). Switching between mappings would require a reflash at a Dinan authorized dealer. Full map rescaling for drivability from idle to wide-open throttle and everywhere in between. Optimized boost control, cam phasing, fueling, airflow, and temperature controls for maximum power output that is also safe and reliable. Sport Cooling mode in sport / manual modes. Top speed governor (VMAX) removed. Retains all BMW factory engine damage safeguards and adds additional safety protections. Torque gains drastically improve acceleration. COMPATABILITY NOTICE - BOX CODES The N55 engine and its multitude of variants account for several 100 unique box codes across various platforms. While Dinan has created files for a great number of these permutations, there is a chance you may have a box code that we have not seen. If this happens to be the case, Dinan will need to create a file for your vehicle. This process could take several days and multiple dealer visits. Neither the N55 based M2/X4 M40i nor N55 engines equipped with a pneumatic wastegate are supported with this version of software. D900-N55-S2 is specific to N55's with an electronic wastegate.

Show More Show Less

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

Ships in 4 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Weistec BMW N20 W.2 ECU Tune

T#:22690739

Part#: 05-420-00102-4KT

Ships in 1 Business Day

$ 1,099.00 USD

Add to Wish List

Qty

$ 1,099.00 USD

Add to Wish List

Increase of +90 Horsepower, and +90 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance exhausts & high-flow air filters!

AFE Power Scorcher GT Power Module - BMW F22/23 F3X E84 F10 F25 F26 N...

T#:401282

Part#: 77-46316

In Stock at Vendor

$ 555.99 USD

Add to Wish List

Qty

$ 555.99 USD

Add to Wish List

A simple 30-minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high-quality case & wire harness with factory-style connectors for an easy plug-and-play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +41 horsepower and up to +58 lbs. x ft. of torque verified by our in house dyno. Direct Plug & Play Power: This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. In-Cabin On-the-Fly Power Adjustments: SCORCHER GT modules feature In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. High Quality Case & Wire Harness: aFe SCORCHER GT modules uses high-quality aluminum extrusion black powder-coated enclosure casing and factory-style connectors which require no modification to your factory harness. These factory-style connectors, plugs directly into the stock wiring harness connectors and sensors. High Precision and Quality: SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. aFe POWER does not recommend to use with any other tuners or modules. This SCORCHER GT is not CARB-exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. Quick and easy plug & play installation without any modifications Around 30 minute installation Dyno tested and produced significant power increases of +41 HP / +58 lbs. x ft. torque Increase turbo boost to improve vehicle performance, efficiency and throttle response In-cabin on-the-fly Power Adjustments via LED light switch 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) Leaves no trace on ECU (No Footprint) High-quality case & wire harness w/ factory style connectors High reliability, 100% of units tested Compatible with other aFe POWER performance products

Show More Show Less

RaceChip Tuning Module - N20

T#:641461

Part#: RACECHIPN20

Ships in 3 Business Days

Starting at $ 548.00 USD

Add to Wish List

Starting at $ 548.00 USD

Add to Wish List

RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +32 HP +60 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +40 HP +75 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +48 HP +90 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.

Show More Show Less

Weistec BMW N20 W.1 ECU Tune

T#:22690738

Part#: 05-420-00101-3KT

Ships in 1 Business Day

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

Increase of +62 Horsepower, and +65 Torque! Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

DAHLer BMW Engine Performance Tuning - N55

For pre-order

T#:13793004

Part#: DAHELECS-TUNE-N5

Special Order: No Guaranteed ETA

$ 2,197.99 USD

Add to Wish List

Qty

$ 2,197.99 USD

Add to Wish List

Dahler's N55 tune is simply plug-and-play. Designed and made to pull out maximum power, this tune won't throw any codes and has plugs to connect in-line with each boost pressure sensor and camshaft position sensor on the vehicle's engine. The module can be controlled by and app via your smartphone and has 3 customizable driving programs, (race, comfort, and eco). The kit also comes with an adapter that can revert the car to its original state without removing the harness for situations where the tune isn't necessary, for instance, a shop appointment, or valet. The Dahler module is undetectable to diagnostic readers so there is no trace of its existence.

Show More Show Less

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

T#:29234292

Part#: 910.1010

Back Ordered

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Chips & Software for BMW X Series F26 (2015+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results