Search | Turner Motorsport

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

T#:5269535

Part#: OILCAPNXXS55POL

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

BMS Oil Catch Can - F-Chassis B58

T#:600275

Part#: BCC-B58

Ships in 2 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that F Chassis B58 BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffle systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned in to place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Triple Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Triple Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Genuine BMW Heat Exchanger For Engine Oil - 17217628058 - F22,F30,F32...

T#:46619

Part#: 17217628058

Back Ordered

$ 250.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Genuine BMW Heat Exchanger For Engine Oil -
This item fits the following BMW Chassis:
F22,F30,F32

Fits BMW Engines including:
N55

Burger Motorsports Turbo Double Baffle Oil Catch Can - F30/32/33/34/3...

T#:5567060

Part#: OCCN55-F3X

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Rein Engine Oil Filter Housing Cap CPL0070

2X Entries Into Our F80 M3 Sweepstakes

T#:34181283

Part#: 11427926064

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
Prevents oil leaks, helping maintain optimal oil pressure for engine health
Made from high-quality materials for enhanced durability and longevity
Easy installation process allows for quick maintenance and replacements
Ideal for both professional mechanics and DIY car enthusiasts
Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.

Show More Show Less

Nissens Oil Cooler - Multiple BMWs

T#:380463

Part#: 11427525333

Ships in 7 Business Days

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

Genuine BMW Oil Pump

T#:528044

Part#: 11417643046

Ships in 3 Business Days

8% off MSRP $ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD

Add to Wish List

The oil pump is responsible for making sure your engine is getting the proper oil flow.

Magnetic Billet Oil Filter Housing Cap For B58 - Red Anodized ...

T#:5269542

Part#: OILCAPB58RED

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.

Show More Show Less

URO Premium Aluminum Oil Filter Housing And Cooler Assembly Upgrade K...

2X Entries Into Our F80 M3 Sweepstakes

T#:43750252

Part#: 11428507697PRMK

In Stock

$ 604.99 USD

Add to Wish List

Qty

$ 604.99 USD

Add to Wish List

If you have noticed a mixture of coolant and oil, have consistently suffered from unexplained coolant loss, or if your BMW's engine has higher mileage, there is a good chance that your factory plastic oil filter housing has cracked and/or failed. This Aluminum URO oil filter housing and cooler is a complete replacement of your factory unit, which eliminates the possibility of failure due to weak materials.

Show More Show Less

Engine Oil Filter Housing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:48780829

Part#: F3XAMOFHKT

Ships on Jan 8, 2027

Sale - Save 14% $ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.57 USD

Add to Wish List

Qty

Sale - Save 14%

$ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.57 USD

Add to Wish List

Engine oil filter housing replacement kit. By replacing the factory plastic oil filter housing, you can prevent future cracks and leaks in your engine oil assembly.

Project Cars

SELECT YOUR BMW

Showing 311 results for ""

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

BMS Oil Catch Can - F-Chassis B58

Improved Racing BMW Oil Cooler Thermostat (180F)

Genuine BMW Heat Exchanger For Engine Oil - 17217628058 - F22,F30,F32...

Burger Motorsports Turbo Double Baffle Oil Catch Can - F30/32/33/34/3...

Rein Engine Oil Filter Housing Cap CPL0070

Key Benefits:

Nissens Oil Cooler - Multiple BMWs

Genuine BMW Oil Pump

Magnetic Billet Oil Filter Housing Cap For B58 - Red Anodized ...

URO Premium Aluminum Oil Filter Housing And Cooler Assembly Upgrade K...

Engine Oil Filter Housing Replacement Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results