BMW Brakes & Brake Parts for BMW 3 Series F30 (2012+)

The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.

Featuring:

• High Intial Bite
• Consistent torque over all pressures
• Operating Range:400-1600°F; 204-871°C
• High Temp & High Torque
• Provides Superior Pad and Disc Wear
• Excellent Torque Control
• Excellent Modulation and Release Characteristics
• Designed for High Deceleration Rates.

*Not for vehicles with Carbon Ceramic brake rotors.

Enhance your BMW's braking performance with this meticulously engineered OEM brake kit. Sourced directly from BMW, this comprehensive kit equips you with all the necessary components for a complete brake system upgrade. With straightforward installation requiring basic tools, you can transform your car's stopping power over a weekend.

• Upgraded 4 Piston calipers for the front
• 370x30mm Dimpled & Slotted Rotors
• Brake pads and Backing plates included
• Rear features Larger 2 Piston calipers
• 345x24mm Dimpled & Slotted Rotors
• Brake pads and essential hardware provided

This is a pair (2) of Genuine BMW FRONT brake rotors/discs (370x30mm) for all F30, F31 F32 F33 and F34 models with either the BMW M Performance brakes or 335/435 with the optional M Sport brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade.

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 335/435 optional brakes (option code S2NH or S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey calipers. Note that only the 335 and 435 M Sport upgrade used 370mm rotors; the 328i/428i M Sport option used a 340mm rotor. See below for a breakdown of the exact exact models and packages these rotors will work on. And for more information on the brakes for the F30/F32 chassis, see our FAQ page.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NH/S2NHA M Sport brake option:
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible

These pads are Genuine BMW and will perform exactly like the pads that were originally installed on your car.

Price is for a set of brake pads.

This brake pad set was original equipment on the following BMWs: 
2012-2013 F30 BMW 335i 335xi (with M Sport Brakes option) 
2014+ F32 F33 BMW 435i 435xi (with M Sport Brakes option) 

This brake pad set is an upgrade on the following BMWs: 
2012-2013 F30 BMW 335i 335xi (with stock brakes) 
2014+ F32 F33 BMW 435i 435xi (with stock brakes) 

These REAR rotors fit to F22 228, F30 328, and F32 428 models with the optional M Sport Brakes upgrade (option code S2NHA). These rotors are larger and have a dimpled/slotted surface compared to what came on the base, Luxury, Modern, Sport, and M Sport trim packages. The dead giveaway whether or not you have the M Sport option is the rear caliper - the S2NHA option added 2-piston Brembo calipers on the rear while all of the brakes were a standard single piston caliper (a Brembo caliper was also used on the front for S2NHA).

These rotors were originally part of the M Performance package, which was an accessory installed after the car was delivered. It was BMW's version of an aftermarket big brake kit but these rear rotors happen to be a direct fit to 228/328/428 when equipped with the optional S2NHA M Sport brake upgrade. They are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance, especially when driven hard.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs (with S2NHA M Sport Brake Upgrade):
2014+ F22 BMW 228i 228iX
2012+ F30 BMW 328i - Sedan
2014+ F32 BMW 428i - Coupe
2014+ F33 BMW 428i 428iX with N20 engine only - Convertible
N20 engine: the rear rotors were different on the F33 428 convertible based on which engine the car has. N20 is the ULEV engine; N26 is the SULEV low emissions engine. The emissions sticker under the hood will be labeled ULEV or SULEV.

Brake pad wear sensors are a convenient part of the braking system, notifying the driver of when the material on the brake pads are getting low and need to be serviced. Unfortunately it is common in custom or upgraded braking systems that the pad wear sensor is non-existent or does not mate properly with the connector on your vehicle, leaving you with a brake pad wear warning every time you start your vehicle.

ECS Tuning has developed this direct-fit Brake Pad Wear Sensor Bypass to alleviate this issue. This sensor bypass will trick the vehicle's electronics into thinking that the brake pads have adequate pad material to keep the dashboard warning from appearing. No more unnecessary warnings when installing a big brake kit or your own custom setup. This bypass is a plug-and-play component that requires no modifications so you can revert back to your OEM setup if necessary.

Some vehicles may be equipped with two front brake pad wear sensors, or a front and rear sensor, please be sure to double check the required quantity for your vehicle before placing an order.

*During installation, make sure to clean the mated female connector on your vehicle of any dirt or debris to ensure that the Brake Pad Wear Sensor Bypass is engaged securely.

Key Benefits:

• High-Performance: Specifically designed for high-speed, hard braking applications.
• Aggressive Stopping Power: Ideal for track use, ensuring quick and reliable deceleration.
• Temperature Resistant: Effective in high-torque situations, functioning optimally at elevated temperatures.
• Compatibility: Recommended to pair with DTC-70 for optimal front and rear axle performance.
• Versatile Options: Hawk provides a range of pads to suit both track and street driving needs.