BMW Brakes & Brake Parts for BMW 3 Series F30 (2012+)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
F22 BMW 228i/ix 230i/ix (w/ Standard Brakes)
F3X BMW 320i/ix 328d/i/ix 330i/ix 428i/ix 430i/ix (w/ Standard Brakes)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
F3X BMW 335 340 435 440 (w/ M Sport Brakes)

Turner Motorsport presents Akebono Euro Ceramic Brake Pads, harnessing innovative ceramic brake technology for superior braking performance. With decades of experience in motorsports, Akebono's ceramic brake pads offer unmatched benefits over traditional metal compound pads. The manufacturer-approved formulation ensures excellence, with advantages including reduced brake fade in hot conditions, shorter stopping distances, minimal brake dust, and significantly increased brake rotor lifespan.

• Innovative Ceramic Technology: Utilizes advanced ceramic brake pad technology.
• Manufacturer-Approved Formulation: Ensures unmatched compound quality.
• Reduced Brake Fade: Ceramic's slower heat absorption prevents fading during heavy braking in hot conditions.
• Shorter Stopping Distances: Higher co-efficient of friction enhances stopping power.
• Minimal Brake Dust: Lower metal content leads to a significant reduction in brake dust.
• Increased Brake Rotor Life: Drastically improves the lifespan of brake rotors.
• Proven Quality: Akebono Euro brake pads used in over 90 vehicle models as original equipment.

Upgrade your BMW's braking system with Akebono Euro Ceramic Brake Pads from Turner Motorsport.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2014-2016 F22 F23 BMW 228i/i xDrive

2012-2016 F30/31/34 BMW 320i/xDrive 328d/xDrive 328i/GT xDrive

2014-2016 F32/33/36 BMW 428i/xDrive

This is a Genuine BMW REAR brake rotor/disc (345x24mm) for all F30, F31 F32 F33 and F34 models with the BMW M Performance brakes. These will also work on the F3X 328iX/428iX with the optional M Sport Brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade (328iX/428iX).

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 328iX/428iX optional brakes (option code S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey 2-piston Brembo calipers. Note that the RWD 328i/428i also used a 345mm rear rotor but the AWD has a different parking brake system. See below for a breakdown of the exact exact models and packages this rotor will work on.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs (with S2NHA M Sport Brake Upgrade):
2012+ F30 BMW 320iX 328iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428iX - Coupe
2014+ F33 BMW 428i 428iX with N26 engine only - Convertible
2014+ F36 BMW 428i 428iX - Gran Coupe
N26 engine: the rear rotors were different on the F33 428 convertible based on which engine the car has. N20 is the ULEV engine; N26 is the SULEV low emissions engine. The emissions sticker under the hood will be labeled ULEV or SULEV.

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of 370mm brake rotors.

This item fits the following BMWs with 370mm M Sport/M Performance brakes:
2012+ F30 BMW 320i 320iX 328i 328iX 330i 330iX 335i 335iX 340i 340iX - Sedan
2012+ F31 BMW 328iX 330iX - Touring Wagon
2012+ F32 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - Coupe
2013+ F33 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - Convertible
2012+ F34 BMW 328i 328iX 330i 330iX 335i 335iX 340i 340iX - Gran Turismo
2012+ F36 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - GranCoupe

These are the OEM brake pads to fit the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This set includes pads for both the front and rear brakes.

This item fits the following BMWs:
F22/23 BMW 228i (with M Sport Brakes), M235i/xDrive, M240i/xDrive
F30/31/34 BMW 328i/xDrive (with M Sport Brakes), ActiveHybrid 3 (with M Sport Brakes), 335i/xDrive
F32/33/36 BMW 428i/xDrive (with M Sport Brakes), 435i/xDrive

Enhance your BMW's braking performance with this meticulously engineered OEM brake kit. Sourced directly from BMW, this comprehensive kit equips you with all the necessary components for a complete brake system upgrade. With straightforward installation requiring basic tools, you can transform your car's stopping power over a weekend.

• Upgraded 4 Piston calipers for the front
• 370x30mm Dimpled & Slotted Rotors
• Brake pads and Backing plates included
• Rear features Larger 2 Piston calipers
• 345x24mm Dimpled & Slotted Rotors
• Brake pads and essential hardware provided

This is a pair (2) of Genuine BMW FRONT brake rotors/discs (370x30mm) for all F30, F31 F32 F33 and F34 models with either the BMW M Performance brakes or 335/435 with the optional M Sport brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade.

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 335/435 optional brakes (option code S2NH or S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey calipers. Note that only the 335 and 435 M Sport upgrade used 370mm rotors; the 328i/428i M Sport option used a 340mm rotor. See below for a breakdown of the exact exact models and packages these rotors will work on. And for more information on the brakes for the F30/F32 chassis, see our FAQ page.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NH/S2NHA M Sport brake option:
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible