BMW Brakes & Brake Parts for BMW 3 Series F30 (2012+)

The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.

Featuring:

• High Intial Bite
• Consistent torque over all pressures
• Operating Range:400-1600°F; 204-871°C
• High Temp & High Torque
• Provides Superior Pad and Disc Wear
• Excellent Torque Control
• Excellent Modulation and Release Characteristics
• Designed for High Deceleration Rates.

*Not for vehicles with Carbon Ceramic brake rotors.

This is a Genuine BMW REAR brake rotor/disc (345x24mm) for all F30, F31 F32 F33 and F34 models with the BMW M Performance brakes. These will also work on the F3X 328iX/428iX with the optional M Sport Brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade (328iX/428iX).

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 328iX/428iX optional brakes (option code S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey 2-piston Brembo calipers. Note that the RWD 328i/428i also used a 345mm rear rotor but the AWD has a different parking brake system. See below for a breakdown of the exact exact models and packages this rotor will work on.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs (with S2NHA M Sport Brake Upgrade):
2012+ F30 BMW 320iX 328iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428iX - Coupe
2014+ F33 BMW 428i 428iX with N26 engine only - Convertible
2014+ F36 BMW 428i 428iX - Gran Coupe
N26 engine: the rear rotors were different on the F33 428 convertible based on which engine the car has. N20 is the ULEV engine; N26 is the SULEV low emissions engine. The emissions sticker under the hood will be labeled ULEV or SULEV.

Upgrade your BMW's braking system with Power Stop Evolution Tru-Cast Drilled and Slotted Rotors, designed to stay cooler under spirited driving. These rotors are precision machined with OE fitment and feature cooling holes drilled to exact specifications for enhanced cooling without compromising strength. The rounded slots in the friction surface effectively direct gas and debris away from the rotor, ensuring consistent pad-to-rotor contact. With a Silver Zinc Dichromate plating, these rotors boast increased lifespan and durability. Experience improved braking performance for both street and track use with Power Stop Evolution Tru-Cast Drilled and Slotted Rotors.

• Precision-machined rotors with OE fitment for easy installation
• Cooling holes drilled to exact specifications for enhanced cooling
• Rounded slots direct gas and debris away from the rotor for consistent braking performance
• Silver Zinc Dichromate plating increases lifespan and durability
• Suitable for both street and track use

Elevate your BMW's braking performance with Power Stop Evolution Tru-Cast Drilled and Slotted Rotors, designed for those seeking enhanced cooling during spirited driving. These precision-machined rotors offer OE fitment and a range of benefits to optimize braking efficiency.

• High-quality stock style rotors for precision performance
• Drilled cooling holes for quicker cooling without compromising strength
• Rounded slots in the friction surface for efficient gas and debris dissipation
• Constant firm contact between the pad and rotor for improved braking
• Silver Zinc Dichromate plating for extended rotor lifespan
• Perfect fit with no modifications required for easy installation
• Ideal for both street and track use, providing effective cooling

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.