BMW Engine Parts for BMW 3 Series F30 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships on Oct 13, 2026
$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping
Fuel-It! - Corporate Logo
T#:17106920
Part#: BMW-B58HPFP-A01
Ships on Oct 14, 2026
$ 1,499.00 USD
Free Shipping on orders $49 and up
$ 1,499.00 USD
Free Shipping on orders $49 and up
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less
N55 Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
Starting at $ 1,549.65 USD
Free Shipping
Starting at $ 1,549.65 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships on Oct 13, 2026
$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29201085
Part#: 200.1058
Ships in 5 Business Days
$ 794.00 USD
Free Shipping on orders $49 and up
Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products. With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).
Show More Show Less
Bootmod3 - Corporate Logo
T#:54852022
Part#: BM3FKKFBX8
Ships on Oct 13, 2026
New Item
$ 499.00 USD
$ 499.00 USD

Kelford Cams - Corporate Logo
T#:25938619
Part#: KEL-HPVSK-B58
Ships in 4 Business Days
$ 699.99 USD
Free Shipping on orders $49 and up
Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm
Show More Show Less
Ferrea - Corporate Logo
T#:28770000
Part#: FER-HPVK-N20-T
Ships in 4 Business Days
$ 619.99 USD
Free Shipping on orders $49 and up

Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships on Oct 13, 2026
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

CTS - Corporate Logo
T#:46031873
Part#: TR-1057
Ships in 8 Business Days
$ 2,099.99 USD
Free Shipping
$ 2,099.99 USD
Free Shipping
BMW B58 Gen1 hybrid turbo designed to deliver maximum performance while maintaining OEM fitment and reliability. Built for enthusiasts looking to extract more power from their B58, this hybrid turbo provides increased airflow and efficiency for higher horsepower and torque gains, supporting 700whp+ with the proper supporting modifications.
Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:25042579
Part#: 003239LB01EBKT
In Stock
Sale - Save 14% $ 769.39

This product was last offered at the strikethrough price on
05-05-2026

$ 659.10 USD
Sale - Save 14%
$ 769.39

This product was last offered at the strikethrough price on
05-05-2026

$ 659.10 USD

Elevate your engine bay aesthetics with the stunning gloss carbon fiber engine cover designed for F Chassis BMWs. This Turner carbon fiber engine cover is a quick and transformative upgrade, replacing the plain factory plastic cover on B58 engines. In just minutes, your engine bay's appearance can be revitalized. The cover retains the factory emblem, ensuring a seamless transfer from your original engine cover to the new carbon fiber one. As one of the initial modifications for a new car, this carbon engine cover provides an instant enhancement without the need for extensive disassembly.

Crafted from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the Turner B58 Carbon Engine cover boasts a factory-form fitment derived from a mold of the original engine cover. The gloss clear coat not only enhances its aesthetic appeal but also provides UV protection and extra durability. Explore the range of other carbon fiber pieces from Turner to further enhance your B58.

  • Gloss carbon fiber engine cover for F Chassis BMWs
  • Quick and transformative upgrade for B58 engines
  • Retains factory emblem for a seamless transfer
  • Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
  • Gloss clear coat for UV protection and durability
  • Easy installation, enhancing engine bay appearance in minutes

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with the Turner BMW Ignition Coils designed for efficiency and power. Modified for increased energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is essential for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a strong and healthy engine.

  • Increased performance
  • Direct fitment
  • Signature Turner Blue finish
Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:400445
Part#: 11122444531
Ships in 5 Business Days
$ 3,514.60 USD
$ 3,514.60 USD

BMW offers their M Performance retrofit kit for your 340i/i xDrive & 440i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

  • M Performance Muffler
  • M Performance Decal Kit
  • Stick on label and Badge
  • Performance BMW software upgrade code
  • Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.
 

Show More Show Less


SCE Gaskets - Corporate Logo
T#:5215986
Part#: CR330070
Special Order: No Guaranteed ETA
$ 205.99 USD
Free Shipping
$ 205.99 USD
Free Shipping
The Vulcan Cut-Ring head gasket is designed for use with high static compression or forced-induction engines which are prone to combustion pressure leaks when using typical composite or MLS head gaskets. The hybrid design offers the best properties of composite and steel head gaskets all with out needing added sealant or machining.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:11399223
Part#: 201-0245
Ships in 10 Business Days
$ 164.99 USD
Free Shipping on orders $49 and up
This is a better than OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.

Precision Raceworks - Corporate Logo
T#:5216003
Part#: 601-0091
Ships in 10 Business Days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes 2 Walbro 450 (F90000274) fuel pumps, capable of supporting up to 850whp on 93 octane gas or 800whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box 2 New genuine OEM fuel pump bucket assemblies (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~850whp Horsepower Supported 100% E85: ~800whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195414
Part#: 601-0198
Ships in 10 Business Days
$ 1,319.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4 (5.5 liters per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket with a Walboro 450 (F90000274) fuel pump outside the bucket. This pump can support up to 1,000whp! (Rated for 950whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, slide the bucketless bracket onto the side of bucket and close the top hat you are ready to go!
Show More Show Less

Racing Dynamics - Corporate Logo
T#:1637701
Part#: 1317455040
Ships in 6 Business Days
$ 395.00 USD
Free Shipping
$ 395.00 USD
Free Shipping
Precision Raceworks - Corporate Logo
T#:1316816
Part#: 601-0175
Ships in 6 Business Days
$ 1,199.99 USD
Free Shipping
$ 1,199.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection and a tune (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Precision Raceworks' Multiport Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the Precision Raceworks kit is the industry leader and only plate style kit featuring even fuel distribution across all 6 cylinders. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between!
Show More Show Less

King - Corporate Logo
T#:24179124
Part#: MB5784SI
Ships in 7 Business Days
13% off MSRP $ 273.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 273.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD
Free Shipping on orders $49 and up

BMW B46 B48 Engine Main Bearing Kit - Std. Size is the ultimate choice for enhancing the performance and reliability of your BMW engine. Available from Turner Motorsport, this premium kit is crafted with precision to ensure unmatched durability and stability. Designed to meet the demands of both everyday driving and high-performance applications, this kit provides the support and performance enhancements your BMW engine needs.

  • Complete Set: The kit includes all necessary main bearings for a full engine rebuild or upgrade.
  • Silver Bi-Metal Construction: Made from high-quality silver bi-metal material for exceptional strength, durability, and heat resistance.
  • Precision Engineering: Engineered to exacting standards for optimal fitment and compatibility with BMW engines.
  • Enhanced Performance: Provides improved engine stability and smoother operation for a better driving experience.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:31059467
Part#: 201-0396-BLU
Ships in 7 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Billet Engine Oil Cap is a functional and stunningly stylish way to add a nice touch to any engine bay! Many people don't realize it but the OEM caps have a pressure release valve built into them. Precision Raceworks has designed their engine oil cap in a way that allows the re-use of the pressure release valve from your stock oil cap. These caps offer superior style and performance-grade components that guarantee a reliable fit every time. Durable billet aluminum construction provides long-lasting protection and dependability that will upgrade your engine bay for years to come.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161745
Part#: 601-0331
Ships in 7 Business Days
$ 699.99 USD
Free Shipping on orders $49 and up
Designed for BMW F3x/F8x models, this billet top hat is the best solution for enthusiasts who demand more from their vehicle's fuel system. A quality upgrade engineered to deliver unparalleled fuel system reliability and versatility.
Show More Show Less
Bav Auto Cylinder Head Valve Cover w/ Gasket - BMW F22/23 F3X N26 SU...
For vehicles with the N26 SULEV engine only
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with the N26 SULEV engine only
Bavarian Autosport - Corporate Logo
T#:639846
Part#: 11127633630
Ships on Oct 20, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Years of excessive can cause the plastics of your valve cover to become warp or become hard and brittle, leading to cracking and potential oil leak issues. If you are experiencing oil loss, vacuum issues, or even poor running conditions, your valve cover may be the reason why. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less


Supertech - Corporate Logo
T#:14783498
Part#: BMIVN-1055S-12
Ships in 9 Business Days
$ 310.99 USD
Free Shipping on orders $49 and up
Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm
Supertech - Corporate Logo
T#:21604322
Part#: RET-BMN54-TI-12
Ships in 9 Business Days
$ 197.99 USD
Free Shipping on orders $49 and up
7 Degree - 5mm valve stem - Single or Tripe Groove Valves
DeatschWerks Performance Fuel Injector Set - 90lb/hr(1000cc) ...
For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!
DeatschWerks - Corporate Logo
T#:6151338
Part#: 16U-00-0090-6
In Stock
$ 524.99

This product was last offered at the strikethrough price on
09-15-2026

$ 519.00 USD
Free Shipping
$ 519.00 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 90lb/hr 1000cc injectors. All relevant tuning data available on DeatschWerks website.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less

Spool Performance - Corporate Logo
T#:640961
Part#: SP-BM-FSP-S2
Special Order: No Guaranteed ETA
$ 499.99 USD
Free Shipping
$ 499.99 USD
Free Shipping
Stage 2 LPFP upgrade kit for your N55 engine
Supertech - Corporate Logo
T#:21604321
Part#: RET-BMN54-TE-12
Ships in 9 Business Days
$ 197.99 USD
Free Shipping on orders $49 and up
7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Precision Raceworks - Corporate Logo
T#:38161705
Part#: 101-0258
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is designed for high-performance fuel systems, providing efficient filtration to protect vital components in your BMW. With a 6-micron filtration capability, this element ensures that harmful debris and contaminants are removed, safeguarding fuel pumps, injectors, and other critical parts from damage. Whether you're racing or daily driving, this filter helps maintain optimal fuel flow, ensuring consistent engine performance under all conditions.

This dual open design fits seamlessly into Precision Raceworks inline fuel filters, offering reliable and efficient performance for both street and track applications. Easy to replace and designed for maximum protection, this filter element helps keep your fuel system in top condition, ensuring long-lasting performance and reliability.

  • 6-micron filtration – Effectively removes harmful contaminants, improving fuel system longevity
  • Dual open design – Provides balanced flow and efficient filtration for superior fuel system protection
  • Precision-engineered – Custom fit for Precision Raceworks inline fuel filters, ensuring easy installation
  • Durable construction – Built with high-quality materials to withstand demanding driving conditions
  • Protects critical components – Safeguards fuel pumps, injectors, and more from debris and impurities
  • Simple maintenance – Quick and easy to replace, ensuring your system performs at its best
  • Versatile usage – Suitable for both high-performance racing and daily driving

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect twice per season and replace as needed to maintain peak performance
  • Daily driving: Inspect at least once per year or every 6,000 miles for preventative maintenance

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is an essential upgrade to keep your BMW’s fuel system running smoothly and protected from contaminants.

Show More Show Less
Supertech - Corporate Logo
T#:21604308
Part#: SPRKFE20N54BE
Ships in 5 Business Days
$ 965.99 USD
Free Shipping
$ 965.99 USD
Free Shipping
Supertech has the high performance valvetrain components you need to take your build to the next level. ​Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 75 @ 36.5 Open Pressure: 155 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 8 Kit spring: SPR-FE20BE Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24
Show More Show Less

Supertech - Corporate Logo
T#:14816646
Part#: BMEVI-1055S-HS-1
Ships in 5 Business Days
$ 660.99 USD
Free Shipping on orders $49 and up
Single Groove sodium filled exhaust valve set for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm
Show More Show Less

Precision Raceworks - Corporate Logo
T#:1316810
Part#: 601-0015
In Stock
$ 699.99 USD
Free Shipping
$ 699.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less
Vader Solutions - Corporate Logo
T#:4168555
Part#: B58STG3FUELPUMP
Ships in 9 Business Days
$ 750.00 USD
Free Shipping
$ 750.00 USD
Free Shipping
This plug n play stage 3 pump solution is great for those who are wanting to push over 700whp in your B58 powered car. No core required! Included: Plug-n-Play Stage 3 Fuel Pump
Precision Raceworks - Corporate Logo
T#:38161697
Part#: 622-0290-BLK
Ships in 10 Business Days
$ 269.99 USD
Free Shipping on orders $49 and up

BMW B58 / S58 Black Billet Engine Fluid Cap Set is a premium upgrade designed to enhance both the performance and aesthetics of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set provides superior durability while replacing the factory plastic caps for a sleek, high-end look.

Engineered to maintain full OEM functionality, these caps integrate the original pressure relief valves, ensuring proper system operation. The deep black anodized finish adds a bold and aggressive appearance while offering excellent resistance to heat and corrosion.

  • Precision-machined billet aluminum – Stronger and more durable than factory plastic caps
  • OEM pressure relief compatibility – Ensures safe and reliable system performance
  • Sleek black anodized finish – Adds a high-performance look to your engine bay
  • Heat and corrosion-resistant – Built to withstand extreme conditions for long-lasting reliability
  • Direct replacement design – Fully replaces factory caps for a seamless fit
  • Simple installation – Requires swapping OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Black Billet Engine Fluid Cap Set, combining premium style with high-performance reliability.

Show More Show Less


Precision Raceworks - Corporate Logo
T#:26238419
Part#: 601-0149
Ships in 10 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 or N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:19858319
Part#: 601-0199
Ships in 10 Business Days
$ 1,399.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH-PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4.5 (6 literes per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 1000+whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, Slide the bucketless bracket onto side of bucket and close the top hat you are ready to go! Included in the box Genuine OEM fuel pump bucket assembly Pre-assembled with OEM Brushless and mounted Walboro 450 Includes fuel sending unit (fuel level sensor) Upgraded AN-6 fuel feed lines with fuel pressure regulator and return lines<> New In-Line Fuel Filter Plug and play boost reference harness (zero cutting, stripping, crimping) 13psi boost reference switch (hobbs switch) This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Stage 4.5 Pump flow 72psi (5bar): 6 LPM Horsepower Supported Pump Gas: 1,000+ Horsepower Supported 100% E85: 1,000+ Aftermarket EKP Required: No
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094344
Part#: 201-0177
Ships in 10 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds

Precision Raceworks - Corporate Logo
T#:38195451
Part#: 201-0149
In Stock
$ 69.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW N20 REPLACEMENT SPARK PLUG WIRES are the same wires that come with our famous BMW N20 HIGH PERFORMANCE IGNITION KIT featuring low resistance high performance spark plug wires. These wires are 100% custom-designed from the ground up and Precision Raceworks is the only company in the world to produce plug wires with boots specific for your N54 BMW to ensure proper fitment and quality. Plug wires are sold in packs of 4 so you get all new plug wires every time. So replace the one you need and keep the rest for spares or replace all 4. All components used meet or exceed OEM requirements and feature seals which are both dust and water resistant. Having problems with your wires click here first for common issues and save yourself some money!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:5229453
Part#: 601-0166
Ships in 10 Business Days
$ 689.99 USD
Free Shipping
$ 689.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 330cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi). Additionally, we offer a further upgrade to 750cc* injectors! These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161696
Part#: 622-0290-SIL
In Stock
$ 269.99 USD
Free Shipping on orders $49 and up

BMW B58 / S58 Silver Billet Engine Fluid Cap Set is a high-quality upgrade that replaces the factory plastic caps with durable billet aluminum for enhanced strength and a sleek, premium appearance. Designed for a perfect fit, this cap set enhances both the aesthetics and functionality of your BMW’s engine bay.

Unlike adhesive overlays or plastic replacements, these billet aluminum caps completely replace the OEM components while retaining essential pressure relief functionality. The precision-machined silver finish offers a refined look while providing superior resistance to heat, corrosion, and wear.

  • Direct replacement – Replaces OEM caps entirely for a factory-like fit
  • Sleek silver finish – Provides a clean, high-end appearance
  • Billet aluminum construction – Offers long-lasting durability and strength
  • OEM pressure relief compatibility – Maintains proper system function
  • Heat and corrosion-resistant – Engineered to withstand extreme conditions
  • Easy installation – Requires transferring OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Silver Billet Engine Fluid Cap Set, the perfect blend of style and performance for enthusiasts who demand the best.

Show More Show Less

F22/F3X 228/328/428 N20 Vargas Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:390263
Part#: VTTN20-350
Ships on Oct 13, 2026
Starting at $ 1,977.00 USD
Free Shipping
Starting at $ 1,977.00 USD
Free Shipping

Vargas Stage 1 N20 turbo upgrade is good up to 350whp with proper tuning and high grade fuel. Vargas N20 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N20.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 350. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less
ARP - Corporate Logo
T#:54104145
Part#: 201-2501
Ships on Oct 14, 2026
New Item
8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
Secure your timing, protect your investment, and push your B58 to the limit with the reliability of ARP.

Supertech - Corporate Logo
T#:21604309
Part#: SPRKFE20N54BE2
Ships in 6 Business Days
$ 965.99 USD
Free Shipping on orders $49 and up
Supertech has the high performance valvetrain components you need to take your build to the next level. ​​Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24
Show More Show Less

New TTE400 N20 Turbocharger Upgrade
Only works with aftermarket inlets
The Turbo Engineers - Corporate Logo
T#:13200606
Part#: N20TTE400
Ships on Oct 13, 2026
Starting at $ 2,164.99 USD
Free Shipping
Starting at $ 2,164.99 USD
Free Shipping
To construct a TTE400 N20, the folks at TTE change the original compressor and employ a far larger and more efficient billet 6+6 wheel and mill the compressor cover to the optimum gap to match the new compressor profile. Notice how they CNC mill the cover to have a smooth transition to the intake inlet, no big step to hinder airflow as you see on the competition's offerings. They replace the original exhaust turbine and CNC mill the turbine housing to install a larger 9 blade turbine for greater gas flow and lower backpressure.
Show More Show Less
TurboSmart - Corporate Logo
T#:4921469
Part#: TS-0551-1012
Ships on Oct 14, 2026
10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
10% off MSRP
$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38161752
Part#: 201-0148
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161737
Part#: 201-0406
Ships on Oct 21, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor