For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55 engine. The compressor wheel inside the turbocharger is increased in size allowing ~30% greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency.These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended. 

Benefits of the Dinan Big Turbo for the EWG N55 Engine:

• Fully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program. 
•  Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency.
• Turbo assembly is compatible with electric wastegate vehicles only.
• Peak power: 445 HP @ 6000 RPM and 455 ft-lbs @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 ft-lbs @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 ft-lbs @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 ft-lbs @ 6500 RPM when coupled with other Dinan Performance upgrades. (Data from F32 435i. Other variants may differ.) 
•  Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). 
• Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P/N D313-0117 is required for additional installation hardware.
•  Factory matching new car warranty (4yr/50k) when run in Dinan specification.
• 50 State Emissions legal; CARB EO # D-176-49.

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

• Increases compressor size by 30%
• Boosts power through increased boost pressure
• Upgraded thrust system for turbocharger longevity
• DINANTRONICS Stage 4 software recommended for optimal engine performance
• Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

ECS 1/2"/12mm Band Hose Clamp - 20-32mm

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Premium 304 stainless steel construction for durability
• German-style T-bolt design for easy size adjustment
• Versatile band widths cater to different hose sizes
• Eliminates the need for expensive dealership purchases
• Ensures secure and reliable hose connections

Includes connector housing with terminals and seals. Commonly used for the pencil-style ignition coil connector.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12527519996 - Commonly used for the pencil-style ignition coil connector.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

• Made from high-quality stainless steel for durability and corrosion resistance
• M18x1.5mm threads ensure compatibility with most oxygen sensors
• Ideal for custom exhaust setups or replacing damaged bungs
• Essential for automotive enthusiasts looking to upgrade their exhaust system

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing

ECS Tuning Stainless Steel Hose Clamps for BMW

Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.

Benefits:

• Convenient replacement for worn-out hose clamps
• Made of durable stainless steel for long-lasting performance
• Available in various band widths for versatile use
• Affordable alternative to dealership pricing