Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
09-28-2026
This product was last offered at the strikethrough price on
09-28-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Engineered for durability and reliability, this clamp ensures a tight seal for your exhaust system components. Its high-quality construction and corrosion-resistant finish provide long-lasting performance, even in harsh conditions. With easy installation and a precise fit, this exhaust clamp is a must-have for any vehicle owner.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
B46/B48 Center Muffler and Resonator Delete - F30/F31/F32/F33/F36:
Upgrade your F chassis with the B46/B48 3" Center Muffler and Resonator Delete for a deeper, more liberating exhaust tone. This modification offers a direct swap for the factory center exhaust section, effectively enhancing both sound and performance.
Experience a distinct shift in exhaust tone, accompanied by improved flow efficiency and the elimination of factory exhaust bottlenecks. The Turner Motorsport B46/B48 Resonator Delete replaces the cumbersome factory center muffler and resonator with lightweight, high-flow T304 stainless steel 3.0" exhaust tubing.
Not only does this upgrade deliver a more pronounced exhaust note, but it also contributes to a smoother flow path, reducing restrictions and enhancing overall performance. Plus, shedding approximately 6 lbs, this mid-pipe replacement offers a practical, cost-effective solution for those seeking an enhanced driving experience without the need to replace the entire exhaust system. Fully compatible with both the front downpipe and rear muffler, it's a seamless addition to your vehicle's setup.
Features and benefits:
Enhanced exhaust tone Simple installation (with instructions!) 6lb weight savings! (Removes center muffler and center resonator) Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Direct bolt-on to the factory downpipe Includes factory front clamp and rear sleeve clamp for full installation Kit Includes:
Front exhaust section Mid-pipe exhaust Section Factory downpipe exhaust clamp Rear muffler sleeve clamp Installation and Support:
Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T38545 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -
High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:
High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!
Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.
Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.
Features and Benefits:
Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Exhaust Valve:
This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.
Simple Installation:
This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.
Dual 4" Polished Tips
Finishing off this system are dual 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.
Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction:
The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
DETAILS:
Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).
All aFe exhaust systems are engineered and manufactured in our Corona, California facility.
High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.
Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.
Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.
Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Product Features:
Fits the Following BMW's:
2016+ F30 BMW 340i B58
2017 F36 BMW 440i B58
High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.
Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.
Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.
Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Product Features:
Fits the Following BMW's:
2016+ F30 BMW 340i B58
2017 F36 BMW 440i B58
aFe is proud to introduce the aFe Twisted Steel® non-catalytic down-pipe for the 2012-2013 BMW F30 335i with the L6-3.0L (N55) engine. In testing this system resulted in a max gain of 13 horsepower and 27 lbs. x ft. of torque and outflowed the restricted OE catalytic converter by up to 190%. This high performance race pipe delivers pure, race-inspired raw power and also produces an aggressive and exciting exhaust sound during hard throttle. aFe also used a massive, light-weight 4" diameter 304 stainless steel tube and progressively tapers to increase exhaust velocity and usable torque.
Tig-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.
Tapered Design:
A unique 4" Dia. 304 stainless steel taper design is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.
Factory O2 Sensor Locations:
Factory mounting locations for all O2 sensors.
Hassle-Free Installation:
OE style brackets are included for a hassle-free installation. This unit also comes with a lifetime warranty.
aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.
Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. A check engine light will emit and aFe recommends using a programmer but it is not necessary.
This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.