BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 3 Series F30 (2012+)

B46/B48 Center Muffler and Resonator Delete - F30/F31/F32/F33/F36:

Upgrade your F chassis with the B46/B48 3" Center Muffler and Resonator Delete for a deeper, more liberating exhaust tone. This modification offers a direct swap for the factory center exhaust section, effectively enhancing both sound and performance.

Experience a distinct shift in exhaust tone, accompanied by improved flow efficiency and the elimination of factory exhaust bottlenecks. The Turner Motorsport B46/B48 Resonator Delete replaces the cumbersome factory center muffler and resonator with lightweight, high-flow T304 stainless steel 3.0" exhaust tubing.

Not only does this upgrade deliver a more pronounced exhaust note, but it also contributes to a smoother flow path, reducing restrictions and enhancing overall performance. Plus, shedding approximately 6 lbs, this mid-pipe replacement offers a practical, cost-effective solution for those seeking an enhanced driving experience without the need to replace the entire exhaust system. Fully compatible with both the front downpipe and rear muffler, it's a seamless addition to your vehicle's setup.

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 6lb weight savings! (Removes center muffler and center resonator) Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Direct bolt-on to the factory downpipe Includes factory front clamp and rear sleeve clamp for full installation Kit Includes:

Front exhaust section Mid-pipe exhaust Section Factory downpipe exhaust clamp Rear muffler sleeve clamp Installation and Support:

Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T38545 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -

High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:

High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes quad 4" diameter, gloss black, 304 stainless steel tips
• Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58
2017 F36 BMW 440i B58

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP Axle-back exhaust system is for the 2016+ BMW 340i F30 and F36 440i Gran Coupe with the new N58 3.0L turbo engine. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes quad 4" diameter, gloss black, 304 stainless steel tips
• Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58
2017 F36 BMW 440i B58

aFe is proud to introduce the aFe Twisted Steel® non-catalytic down-pipe for the 2012-2013 BMW F30 335i with the L6-3.0L (N55) engine. In testing this system resulted in a max gain of 13 horsepower and 27 lbs. x ft. of torque and outflowed the restricted OE catalytic converter by up to 190%. This high performance race pipe delivers pure, race-inspired raw power and also produces an aggressive and exciting exhaust sound during hard throttle. aFe also used a massive, light-weight 4" diameter 304 stainless steel tube and progressively tapers to increase exhaust velocity and usable torque.

Tig-Welded: 
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

Tapered Design: 
A unique 4" Dia. 304 stainless steel taper design is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.

Factory O2 Sensor Locations: 
Factory mounting locations for all O2 sensors.

Hassle-Free Installation: 
OE style brackets are included for a hassle-free installation. This unit also comes with a lifetime warranty.

aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. A check engine light will emit and aFe recommends using a programmer but it is not necessary.

This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

• Enhanced Appearance: Mirror finish provides a polished, high-end look.
• Durable Construction: Double-wall design for long-lasting performance.
• Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
• Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
• Easy Installation: Designed for straightforward installation on compatible vehicles.