BMW Wheels - Genuine & Performance for BMW 3 Series F31 (2014+)

• 60MM, 75MM, 82MM, OR 90MM OVERALL LENGTH
• EASY INSTALL WITH ALLEN SOCKET
• CERTIFIED ISO/TS 16949 AND ISO 9001 BY TUV
• MANUFACTURED IN EUROPE
• BLACK M-PHOSPHATE COATING
• CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
• STUD FOR MIXED STREET/TRACK USE

• Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
  
  Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
  
  Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.
   Turner Bullet Nose Wheel Stud Features:

• Black phosphorous corrosion resistant coating
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel
• Installation Instructions
  Click here for installation instructions and more information.
  
  
  
  Sold per stud.

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

• Provide a polished, high-quality look by covering the open center hole
• Are machined from 6061-T5611 aluminum for superior strength and durability
• Feature a hand-brushed finish for a seamless OEM appearance
• Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
• Are sold in sets of four, with center caps not included

17" Spider Spoke Style 137 Wheel - Square Set Of Four is the perfect upgrade or replacement for damaged or cracked rims on your BMW. These light alloy wheels offer both style and durability, ensuring a seamless fit with your vehicle while enhancing its aesthetic appeal. Designed with a classic spider spoke look, these 17x8 ET47 rims are ideal for those seeking a balance of performance and elegance.

Each set comes with four BMW center caps for a complete, polished look, making it the ideal choice for restoring or upgrading your BMW’s wheels.

• Set of four 17" Spider Spoke Style 137 wheels for a uniform, sleek look
• High-quality light alloy construction for enhanced durability
• Classic spider spoke design adds a stylish touch to your BMW
• Includes BMW center caps for a finished appearance
• Perfect for replacing damaged or cracked rims

These are the factory BMW wheels that were optional on the E85 Z4 3.0i Roadster. Their sizing and offset makes them a direct fit to the E46 and other models. What makes these wheels stand out is their curved concave dish that makes them look larger than their 18" diameter. This is a staggered set in the factory sizes and offsets - 18x8.0" and 18x8.5". These are a direct fit upgrade for all E46 models and will also look great on other chassis as well (see fitment notes).

Z4 Ellipsoid Wheel Set includes -
2 x 18x8.0" ET47 Ellipsoid Style 107 front wheels (BMW #36116758192)
2 x 18x8.5" ET47 Ellipsoid Style 107 rear wheels (BMW #36116758193)
4 x BMW wheel center caps (BMW #36136783536)

These are relatively high offset wheels so wheel spacers will be required on other models. Enter your car info for more specific info. Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail.