Oiling System for BMW 4 Series F32 (2014+)

Magnetic Sump/Oil Pan Plug

T#:22723756

Part#: MMR03-0504

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

OEM Mann Oil Filter Kits - Pack Of 5 - N20 N52 N54 N55

T#:369103

Part#: 11427566327

In Stock

$ 71.99

This product was last offered at the strikethrough price on
08-13-2026

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

MMR Low Temp Thermostat - N54/N55

For 2008 and up models

T#:4565826

Part#: MMR17-0101

Back Ordered

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.

Show More Show Less

MMX Oil Filler Cap - Black

For Most BMW Models 2007 Onwards or Mini Models

T#:4552062

Part#: MMR03-0102-BL

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

MMX's Performance billet oil filler cap machined from billet T-6061 aluminum has been designed to instantly give your engine bay an subtle aesthetic upgrade. This cap comes in a Black finish. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur. Reusing of original seal is required.

Show More Show Less

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

T#:4552049

Part#: MMR03-0502-KP

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

MMX High Performance Oil Filter - BMW B58 & B58TU

T#:29035359

Part#: MMR17-1502

Special Order: No Guaranteed ETA

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.

Show More Show Less

OEM Mahle/Mann Oil Filter - Most 2006+ 6 cylinder, N52/N54/N55 ...

T#:4162

Part#: 11427566327

In Stock

$ 14.27

This product was last offered at the strikethrough price on
08-13-2026

$ 11.19 USD

Add to Wish List

Qty

$ 11.19 USD

Add to Wish List

Replacement oil filter kit for most 2006 and newer 6 cylinder BMWs (see list below). This filter is for the N52/N54/N55 engine, the engine used in 2006+ BMWs. It's also used in the 2015+ F80 M3/M4 but BMW also recommends replacing the oil drain plug at the same time (sold separately).

Show More Show Less

Mann Oil Filter Kit - N20 N55

T#:341261

Part#: 11427640862

In Stock

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Includes all necessary o-rings and components required during an oil service.

BMW B46 B48 Oil Filter - Priced Each

T#:586857

Part#: 11428575211

In Stock

$ 16.63

This product was last offered at the strikethrough price on
04-09-2026

$ 15.06 USD

Add to Wish List

Qty

$ 15.06 USD

Add to Wish List

BMW B46 B48 Oil Filter is a crucial component of the oiling system in BMW vehicles. It plays an essential role in protecting the engine by filtering out contaminants that could otherwise cause premature wear and damage.

Efficient Contaminant Removal: Captures harmful metal particles and debris, preventing them from damaging engine components.
Durable Construction: Designed to last and provide reliable performance, ensuring a clean and efficient engine.
High-Quality Replacement: Offers superior filtration compared to generic aftermarket options, maintaining engine health and longevity.
Compatibility: Specifically designed for BMW B46 and B48 engines, ensuring a perfect fit and optimal performance.

For optimal engine care, Turner Motorsport recommends using the BMW B46 B48 Oil Filter to keep your engine running smoothly and efficiently.

Show More Show Less

Mann Engine Oil Filter/ B58 & A90 MKV

T#:557739

Part#: 11428583898

In Stock

$ 27.52

This product was last offered at the strikethrough price on
07-08-2026

$ 17.38 USD

Add to Wish List

Qty

$ 17.38 USD

Add to Wish List

Keep your oil clean with a new filter

MMX Oil Pressure Gauge Adaptor - Black

T#:5269476

Part#: MMR03-0502KBL

Special Order: No Guaranteed ETA

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

O-Ring Replacement Kit For MMX Performance Filter - BMW B58 & B58TU ...

T#:29035360

Part#: MMR17-0000

Special Order: No Guaranteed ETA

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Genuine MMR Performance O-Ring service kit for the MMX Performance oil filter and billet housing. Does not include MMR oil filter or billet housing, only the four O-Rings needed to service our reusable filter. The MMR Performance oil filter and housing contains four O-Rings within the kit. We recommend you replace the O-Ring set on a regular basis when changing or cleaning the MMR filter, in order to maintain the integrity of the sealing properties it was designed to provide. As it's a direct replacement with the original O-Ring set supplied, it's a very straightforward process to swap and replace. Fitment is limited to the MMR Performance oil filter (MMR17-1502 - See ES4810063) to protect against the notorious B58 oil filter collapse

Show More Show Less

MMX Oil Thermostat Dress-Up Caps W/ Gauge Adaptor - Black

T#:5269479

Part#: MMR03-0502GBL

Special Order: No Guaranteed ETA

$ 111.99 USD

Add to Wish List

Qty

$ 111.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. Includes billet adaptor which is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Performance Billet Oil Filler Cap

T#:28968889

Part#: MMR03-1601

Special Order: No Guaranteed ETA

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Oiling System for BMW 4 Series F32 (2014+)

Sub-Categories

Magnetic Sump/Oil Pan Plug

OEM Mann Oil Filter Kits - Pack Of 5 - N20 N52 N54 N55

MMR Low Temp Thermostat - N54/N55

MMX Oil Filler Cap - Black

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

MMX High Performance Oil Filter - BMW B58 & B58TU

OEM Mahle/Mann Oil Filter - Most 2006+ 6 cylinder, N52/N54/N55 ...

Mann Oil Filter Kit - N20 N55

BMW B46 B48 Oil Filter - Priced Each

Mann Engine Oil Filter/ B58 & A90 MKV

MMX Oil Pressure Gauge Adaptor - Black

O-Ring Replacement Kit For MMX Performance Filter - BMW B58 & B58TU ...

MMX Oil Thermostat Dress-Up Caps W/ Gauge Adaptor - Black

MMX Performance Billet Oil Filler Cap

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results