Select Vehicle
BMW
Mini
Category
- Drivetrain
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
At Turner we are very familiar with the N55 and B58. These are the new generation engines that you you can pull quite a bit of power from quite easily, if you want to put the power to the pavement the factory bushings and reinforcement just wont cut it. With soo many performance parts available for the turbocharged engines, it is very easy to make power but keeping the car under control can be another story. Reduce wheel hop, extend the life of your bearings, and add stability to your chassis!
Our in-house engineers created a solution to help transfer the power to the ground, the result is a simple yet astounding improvement to the performance of your vehicle. The rear diff brace helps put power down by reducing wheel hop and preventing losses during power transfer. With the added rigidity the rear end feels tighter for high speed applications and will extend the life of your choice of OE or aftermarket bushings.
Soft factory rubber differential bushings absorb vibrations between the chassis and differential, providing comfort and softness for normal driving conditions. As these bushings wear you will experience lackluster performance/response and they will need to be replaced. You can extend the life of these bushings while providing increased chassis stability with our differential brace for your F chassis. Add new poly differential bushings for an even better experience (T#:656153)
Note: Drilling is required for installation
Benefits:
Reduce unwanted drivetrain deflection, offering a more enhanced driving experience
Reduced wheel hop
Extend the life of your bushings
Reduced wear on the differential bearing
Increased transfer of power to the pavement
Increased high speed stability
Engineered by Turner to withstand extreme driveline forces of over 1000 Ft/lbs of torque
Provides necessary installation tooling to properly secure brace
PART DESIGN:
Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment
Constructed using aircraft grade 6061-T6 Aluminum, finished in Turner Blue anodization
FEA simulations run to maximize stiffness to weight at base engine power and torque levels with plenty of room for growth
Corrosion resistant Yellow Zinc-Chromate coated grade 10.9 Fasteners
KIT CONTENTS
Turner Blue Anodized Rear Diff Brace
Drill guides for precision installation
Hardware for installation
INSTALLATION:
- Click HERE for Installation Instructions -
Requires 10mm + 15mm carbide tip steel drill bits (T#16907167)
PRODUCT DEVELOPMENT
Turner F Chassis Differential brace was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
These Turner Motorsport solid differential mounts are for the E90/E92 (NON M) 3 series and E82 1 series, and are designed around many racing regulations. Replacing your differentials rubber mounts with this kit will result in a snappier feel when cornering and better suspension performance. You save money by never having to replace the stock rubber mounts that fail due to old age and fatigue. These bushings are CNC machined in the USA and made with high-grade materials.
We have always loved BMWs, but one of their shortcomings has always been shifter throw and feel. Even driving your new BMW ///M home from the dealership, you might realize that the shifter throw leaves something to be desired when you find your right hand in your backseat when shifting into fourth gear. Things only go downhill from here, as these cars increase in age and mileage shifts feel less and less precise. Our short shifter offers 32 to 40% reduction in throw over stock. Note that this short shifter differs from our typical Turner short shifter in that it is solely height adjustable, not throw.
Note that we did notice some resonance when testing on vehicles with factory base model shift knobs (25117596084 or 25117596086, etc). We recommend running ZHP, M, or M Performance to both avoid this and give your shifts the best feel.
TMS E90/E92/E82 (NON M) solid differential mounts are designed around current Grand Am Cup regulations, derived from, and currently used in TMS racecars. Thick Delrin casings are used as the non-metallic solid bushing. Replacing your differentials rubber mounts with this kit will result in a snappier feel when cornering and better suspension performance. You save money by never having to replace the stock rubber mounts that fail due to old age and fatigue. These bushings are CNC machined in the USA and made with high-grade materials.
Increase drivetrain rigidity and put that power to the ground! This industry-leading encapsulated design reduces NVH and prevents heat transfer.
From the factory, all BMW models are equipped with soft rubber or fluid-filled engine mounts. While these mounts perform well at isolating drivetrain vibrations, they are prone to degradation and allow for significant drivetrain movement. This often results in a loose-feeling driveline, missed shifts, and a generally disconnected driving feel.
To address these issues, We have developed a performance alternative. Constructed from 6061 Billet Aluminum, these mounts are built to last. While most performance drivetrain mounts feature solid or polyurethane-bonded aluminum construction, the engineers at Turner designed a unique four-piece design that disburses NVH (noise, vibration, and harshness). This multi-piece design offers the added benefit of serviceability. Additionally, encapsulating the polyurethane and adding a TecaPeek isolator prevents heat transfer to the insert, increasing the lifespan and durability of the mount.
Features & Benefits:
High-strength 6061 billet aluminum construction
80A Polyurethane provides a considerable increase over stock rubber durometer, eliminating excess deflection and ensuring drivetrain stiffness.
Instead of the typical polyurethane-bonded aluminum construction, this mount is encapsulated to reduce NVH (noise, vibration, and harshness).
Finished in black hard-coat anodized for a clean, durable, and corrosion-resistant finish.
TecaPeek isolator reduces heat transfer from the engine to the mount insert, increasing the lifespan of the mount.
A simple bolt-on design makes for an easy install
Replace your worn-out factory engine mounts and experience increased drivetrain rigidity, reduced deflection, and more precise shifting. Our Turner Performance Polyurethane Engine Mount Set is designed for maximum durability and strength while maintaining the perfect balance between stiffness and comfort—the perfect choice for your high-horsepower BMW!
The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.
To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.
Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.
Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.
Key Features:
Cast aluminum construction offers superior strength and resilience over the OE plastic pan
Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating
Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance
Hard coat anodized finish provides exceptional corrosion resistance and longevity
Integrated magnets collect metallic debris, protecting transmission internals
The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.
To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.
Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.
Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.
Key Features:
Cast aluminum construction offers superior strength and resilience over the OE plastic pan
Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating
Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance
Hard coat anodized finish provides exceptional corrosion resistance and longevity
Integrated magnets collect metallic debris, protecting transmission internals
Kit Includes:
Turner Motorsport ZF 8HP High-Capacity Aluminum Transmission Pan OE Hengst G8X Filter Installation Kit
ECS Tuning's Polyurethane Transmission Mounts are designed to address the vital role of transmission mounts in your vehicle's suspension. The factory mounts are notorious for failures that can result in over-revving, mis-shifts, and in extreme cases, potential chassis damage. Our polyurethane mounts provide a robust solution, engineered for both street and track applications, guaranteeing enhanced performance while eliminating concerns about torn mounts.
Polyurethane stands out with its exceptional toughness, durability, and impressive wear resistance compared to rubber. It also exhibits resistance to water, oil, and grease while retaining its original shape even when subjected to significant compression. By reducing deflection, polyurethane facilitates effective power transfer. While there may be a slight increase in NVH (Noise, Vibration, Harshness), the benefits far outweigh this minor compromise in ride comfort. With a polyurethane durometer of 70A, our street mounts are versatile, offering both daily driving comfort and track durability. For more track-oriented enthusiasts, we provide stiffer mounts with an 80A durometer rating.
For a hassle-free installation, we supply a comprehensive DIY guide. ECS Tuning ensures that you are fully supported from start to finish.
Ensure optimal performance for your BMW with the Genuine BMW LT-5 Manual Transmission Fluid. Specifically formulated to meet BMW specifications, this 1-liter container of SAE 75W80 fluid is designed for manual transmissions. Keep your BMW's transmission running smoothly and efficiently with this authentic BMW fluid.
Upgrade your BMW's manual transmission with the Genuine BMW LT-5 Manual Transmission Fluid, providing the quality and performance your BMW deserves.
Genuine BMW hex bolt. M12X1,5X28
Be sure to replace your hardware with any flywheel removal service such as the rear main seal or clutch and flywheel.
Differential Fluid Extraction Adapter is an essential tool for efficiently draining and refilling differential fluid, ensuring your vehicle's differential system remains in optimal condition. Designed to work with most extraction pumps, this adapter simplifies maintenance tasks, making it easier to service your differential without the mess or hassle of traditional methods.
This Differential Fluid Extraction Adapter is a must-have for any vehicle owner looking to maintain the longevity and performance of their differential system.
