H&R for BMW 4 Series F32 (2014+)

28mm 2 way adjustable bar; bushings included.
 

• Reduces body roll
• Highest tensile strength available
  
  H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension's roll stiffness or its resistance to roll in turns while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness giving you an unmatched level of precision and performance.
  
  This item fits the following BMWs:
  2012+ F30 BMW 335i - Sedan
  2013+ F32 BMW 435i - Coupe
  2014+ F22 BMW M235i - Coupe

10mm = .39"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

2014+ F80 M3 - Front Only

2014+F82/3 M4 - Front Only

12mm = .47"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of the latest BMW wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

2015+ F80 BMW M3 Sedan - Front Only
2015+ F82 BMW M4 Coupe - Front Only
2015+ F83 BMW M4 Convertible - Front Only

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

 For vehicles without DDC (Dynamic Dampening Control).

This coilover kit fits the following BMWs:

F22 M235i M240i without DDC

3mm = .12"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are recommended.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer 

H&R's 3mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels. 

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 3mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result. 

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available. 
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe