Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.
This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.
Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.
The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.
Kit includes
This item fits the following BMWs:
2008-2013 E82 BMW 135i 135is 1M Coupe
2013+ E84 BMW X1 xDrive35i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i Convertible
2011-2013 E70 BMW X5 xDrive35i
2011-2013 E71 BMW X6 xDrive35i
The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat.
Kit includes:
This item fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive
2014+ F23 BMW 228i 228i xDrive
2012+ F30 BMW 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible
2014+ F34 BMW 328i xDrive GT - Gran Tourismo
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe
2012+ F10 BMW 528i 528i xDrive
2011+ F25 BMW X3 xDrive28i
2015+ F26 BMW X4 xDrive28i
2009+ E89 BMW Z4 sDrive28i
BMW N54 N55 S55 Mosselman Thermostat Installation Kit is designed to ensure a seamless installation of the Mosselman thermostat on BMW engines. This comprehensive kit from Turner Motorsport includes all necessary gaskets and components, guaranteeing a reliable and precise installation for optimal engine performance.
Upgrade your BMW's cooling system with the Mosselman Thermostat Installation Kit from Turner Motorsport, ensuring a top-quality, reliable setup for your engine.
Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.
ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788
Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure.
Genuine BMW radiator hoses are always a perfect option when performing maintenance thanks to their high quality and longevity.
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36
Fits BMW Engines including:
N55
Ensure your engine runs at the perfect temperature by using this versatile manual fan controller system, compatible with all 12v fan-equipped vehicles. With adjustable activation temperature settings ranging from 150°F to 240°F, you have precise control over your engine's cooling fan. The kit includes a probe-style temperature sensor and a generous 7 feet of wire, making it suitable for installation in vehicles of various sizes.
For added convenience, the system is equipped with a built-in A/C override feature, ensuring your cooling system works seamlessly. It's designed to work with one or two electric fans drawing a combined 25 amps or less. The package includes all the essential wiring connectors and hardware needed for a trouble-free installation.
With a lifetime warranty from Mishimoto, you can trust in the quality and durability of this manual fan controller kit.
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.
Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warnings, visit www.P65Warnings.ca.gov.
Prevent costly oil leaks when installing a new MSL oil cooler from Mosselman. These high-quality rubber gaskets ensure your oil thermostat is sealed properly, guaranteeing peak performance and long service life.
Kit includes:
2x Oil Pressure Hose O-Ring 1x Oil Filter Housing Gasket
If your water pump is showing signs of wear and tear, it's crucial to act promptly. Avoid issues like coolant leaks or the dreaded whining noise under the hood by replacing it as soon as possible. The electric water pump, while efficient, may not always give clear signals – except for one: overheating!
CSF is one of the premier cooling product specialists available on the market thanks to designs such as their High Performance Aluminum Radiators. Using a single pass designed core, this radiator gives you all the cooling you could ever need. Paired with these radiators are CNC machined brackets and corrosion resistant hardware that allow final installation to have a same as stock fitment! This enables you to have much higher cooling without having to cut away any metal or delete any important components just for the sake of lower coolant temperatures.
Features:
Fits the following BMWs:
2016+ F87 BMW M2
2012-2016 F22 BMW M235i/i xDrive
2012-2016 F30 BMW 335i/i xDrive
2012-2016 F32/36 BMW 435i/i xDrive
Ensure optimal coolant flow in your BMW engine block with the Genuine BMW Engine Block Coolant Connector Drain. This authentic BMW coolant connector drain is designed to maintain proper engine temperature and prevent overheating, ensuring reliable performance and longevity for your BMW.
BMW N55 3.0L Thermostat Assembly is an essential component for maintaining optimal engine temperature in your BMW, ensuring reliable performance and longevity. A common source of cracks and leaks, the thermostat assembly plays a critical role in regulating coolant flow. This high-quality replacement from Turner Motorsport is designed to meet or exceed OEM standards, providing a dependable solution to prevent overheating and maintain your engine's efficiency.
BMW N47 N55 Expansion Tank from Turner Motorsport is a high-quality replacement designed to address issues with cracked or damaged coolant expansion tanks. Engineered for durability and performance, this expansion tank ensures reliable cooling system function.
BMW F30 B58 Electronic Thermostat And Coolant Distribution Module from Turner Motorsport is an essential component for maintaining precise engine temperature control. Managed by the vehicle’s computer, this thermostat ensures optimal performance and efficiency by regulating engine and coolant temperatures accurately.
Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.
Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.
Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure.
Genuine BMW radiator hoses are always a perfect option when performing maintenance thanks to their high quality and longevity.
This item fits the following BMW Chassis:
F30,F32,F36,F87
Fits BMW Engines including:
N55
