BMW Performance Chips & Software for BMW 4 Series F32 (2014+)

MHD Wireless OBDII Wifi Flash Adapter V2 - BMW E, F, & G Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9126157

Part#: MHDWIRELESSV2

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The new MHD Wireless OBDII WiFi Flash Adapter V2 allows you to reliably load flash maps to your BMW including JB4 back-end flash maps faster and easier than ever before. Just pair it with your Android or Apple phone and plug it into the OBDII port when you want to flash or use any MHD features. Compatible with E, F, or G Chassis BMWs with the following engines: N54, N55, S55, B58, S58, S63, & N13

NOTE: Additional engines & vehicles may be supported with Non-MHD applications such as Bimmercode or xHP. If your engine is not listed above, please check with the app you intend to use for compatibility with your vehicle.

MHD Flash Adapter Features & Benefits

Compatible with the MHD Flashing Platform, BimmerCode, xHP, and many other wifi diagnostic apps

Load both MHD off-the-shelf maps and custom flash maps (available for limited applications - N54, N55, S55, B58, S58, S63, N13)

Faster flash times compared to wired OBDII cable

Uses Wifi for a reliable connection

Applications

E Chassis BMW

F Chassis BMW

G Chassis BMW

BimmerCode App & Info

All you need for coding your car with BimmerCode is one of the supported MHD OBD adapters and the BimmerCode phone app - https://bimmercode.app/

Show More Show Less

THOR OBDII Wifi Dongle - BMW E/F/G Chassis w/ OBDII

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:568728

Part#: OBD2WIFI1

In Stock

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

With the advent of quick flash software and the increasing popularity of DME re-coding, having the proper interface has never been more crucial. Until now, many have resorted to chains of OBD-USB-Mini USB as the primary method of talking with the cars computer. While this is certainly functional, the user is limited by the length of the cable he or she purchased. Forget about setting your laptop on the workbench...slide that seat back, get cozy and don't you dare shake that cable... Those days are over. Enter the THOR OBDII WIFI dongle. This revolutionary little box is not only compatible with a host of tuning apps including XHP and THOR; but also completely functional with INPA, Tool32, NCSExpert, and WinkFP. Gone are the days of sitting in the driver's seat with your phone or laptop, now you can flash and code from the workbench or your couch if so choose. Clear a spot in the bottom of your toolbox for those amazon cables, you won't be needing them anymore. Features: Reliable, strong WiFi signal Faster flash-times, compared to standard OBD/INPA cable Tested and proven to perform flawlessly and built to last

Show More Show Less

BM3 Wireless OBDII WiFi ENET CANBUS Flash Adapter - BMW F & G Cha...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33746523

Part#: OBD2FA

Ships in 6 Business Days

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

Fastest flash times over ENET and CANBUS
Reliable and consistent connectivity
Ability to configure your own WiFi password.
- Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
Wireless CANBUS Support
- Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
- Enters ultra-low power mode if left plugged in consuming just ~20mA
OTA updates through the new bootmod3 app
Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
Manual Toggle switch to fully power down the adapter
Small form factor, considerably smaller than generic WiFi ENET adapters
No VIN locking, can be used on multiple vehicles

Vehicles Supported:

All BMW F and G series vehicles
2014+ Mini
2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

OEM factory diagnostics such as ISTA and ESYS
XHP App
Bimmercode App
Bimmerlink App
ProTool App
...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Show More Show Less

Motiv ReFlex+ for BMW

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

MHD Tuning CAN FlexFuel Analyzer - F-Chassis B48 B58 N55 S55 ...

Gen1 B58B30M0 Engine with Automatic Transmission ONLY. Compatible with MHD, BM3, or ECU... For models with an Automatic Transmission ONLY. Compatible with MHD, BM3, or ECUTEK Tunes

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with an Automatic Transmission only

T#:17937419

Part#: ECA-F-B58-AT

In Stock

$ 490.00 USD

Add to Wish List

Qty

$ 490.00 USD

Add to Wish List

Upgrade your BMW's fueling system with the CAN Ethanol Content Analyzer from Turner Motorsport. This analyzer reads data from the E85 sensor and converts it to CAN format, enabling the DME to make accurate fueling decisions based on E85 content. Utilizing this analyzer alongside MHD or ECUTEK tunes allows you to activate a FlexFuel-like feature, optimizing performance and efficiency. Protect your engine from potential damage by ensuring your tune supports the FlexFuel feature for the E85 blend you're using.

Plug and play installation, no manual wiring or plumbing required

High-quality hoses tested with 10 bars of static pressure (145 Psi)

Each unit undergoes testing before leaving the manufacturer

Compatible with MHD, BM3, or ECUTEK tuning solutions

Works with any High Pressure Fuel Pump

Show More Show Less

xAutomotive xA Ultra WiFi Adapter - BMW E, F, & G Chassis (2003+)...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51110153

Part#: XA-ULTRA-ADAPTER

In Stock

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

xAutomotives newest WiFi adapter, esigned to deliver exceptional speed, maximum connection stability, and great performance for flashing, coding, and live monitoring. Developed and built in-house by xAutomotive in Europe, this adapter has been tested to ensure superior reliability and seamless integration with all xAutomotive products and a range of third-party apps. This adapter is built to last, crafted from high-quality materials inside and out, and has been rigorously tested in operating temps from -40 degrees C to +70 degrees C in both dry and humid conditions to ensure proper functionality in all conditions. The shell features a soft-touch material, and the electrical contacts are gold-plated for reliable signal transmission.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40004848

Part#: JB4-B48

Ships on Jun 19, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20155613

Part#: BMSPBT-M

Ships on Jun 19, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

JB+ Quick Install Tuner - B58 - 3 Wire

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012607

Part#: JBPLUS-B58-3W

Ships on Jun 19, 2026

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!

Show More Show Less

JB+ Quick Install Tuner - B48 - 3 Wire

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012609

Part#: JBPLUS-B48-3W

Ships in 6 Business Days

$ 238.99 USD

Add to Wish List

Qty

$ 238.99 USD

Add to Wish List

The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!

Show More Show Less

Burger Motorsport JB4 Performance Tuner - CARB Approved - BMW F22/23 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38587638

Part#: JB4GEN1GEN2B58

EO#: D-744-4

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is a powerful and versatile tuning system designed for BMW vehicles with GEN1 and GEN2 B58 engines. It delivers impressive power gains, adding up to 120 wheel horsepower (approximately 140hp at the crank) on a stock engine with pump gas. Performance can be further enhanced with supporting modifications such as bolt-ons, higher octane fuel, E85 blends, and upgraded turbochargers. ### Key Features: - **Plug-and-Play Installation** – Includes an easy-to-install harness for quick setup and removal with no permanent modifications. - **Multiple Tuning Maps** – Comes preloaded with up to eight custom maps optimized for different fuel types and modification levels, including E85 compatibility. - **Real-Time Data Monitoring** – Allows users to track and log up to 40 engine parameters via the JB4 app for precise tuning and performance adjustments. - **Boost by Gear Control** – Adjust boost levels in first, second, and third gears through the app to optimize traction and acceleration. - **Diagnostic Capabilities** – Reads and clears fault codes, assisting with diagnostics and maintenance. For those seeking even greater performance, Burger Motorsports offers a **475 Wheel Horsepower Package** for Gen2 B58 models, featuring the JB4 tuner and additional upgrades to push output up to 475whp, depending on fuel type. The JB4 is the ultimate tuning solution for BMW B58 owners looking to maximize power, drivability, and customization with advanced features and seamless integration.

Show More Show Less

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29201085

Part#: 200.1058

Ships in 5 Business Days

$ 794.00 USD

Add to Wish List

Qty

$ 794.00 USD

Add to Wish List

Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products.Â With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).

Show More Show Less

Motiv ReFlex+ Control Unit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29101684

Part#: 900.1001

Ships in 7 Business Days

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

Motiv ReFlex+

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29101668

Part#: 910.1001

Ships in 5 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

RaceChip GTS Black With App Control - Harness Type B

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641529

Part#: 916736B

Ships in 4 Business Days

$ 658.00 USD

Add to Wish List

Qty

$ 658.00 USD

Add to Wish List

RaceChip XLR5 - BMW & MINI Cooper

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688929

Part#: 999982BMW

Special Order: No Guaranteed ETA

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.

Show More Show Less

ReFlex+ Install Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Weistec BMW N20 W.1 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690738

Part#: 05-420-00101-3KT

Ships in 8 Business Days

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

Increase of +62 Horsepower, and +65 Torque! Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

RaceChip Tuning Module - N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641461

Part#: RACECHIPN20

Ships in 3 Business Days

Starting at $ 548.00 USD

Add to Wish List

Starting at $ 548.00 USD

Add to Wish List

RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +32 HP +60 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +40 HP +75 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +48 HP +90 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.

Show More Show Less

Pedal 2 Metal Throttle Enhancer - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44359952

Part#: 77-20007

In Stock at Vendor

$ 268.99

This product was last offered at the strikethrough price on
12-29-2025

$ 268.00 USD

Add to Wish List

Qty

$ 268.00 USD

Add to Wish List

No more throttle lag!

Weistec BMW N20 W.2 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690739

Part#: 05-420-00102-4KT

Ships in 8 Business Days

$ 1,099.00 USD

Add to Wish List

Qty

$ 1,099.00 USD

Add to Wish List

Increase of +90 Horsepower, and +90 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance exhausts & high-flow air filters!

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29201087

Part#: 200.1103

Ships in 5 Business Days

$ 795.00

This product was last offered at the strikethrough price on
01-05-2026

$ 615.00 USD

Add to Wish List

Qty

$ 615.00 USD

Add to Wish List

Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.

Show More Show Less

AFE Power Scorcher GT Power Module - BMW F22/23 F3X E84 F10 F25 F26 N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:401282

Part#: 77-46316

In Stock at Vendor

$ 555.99

This product was last offered at the strikethrough price on
12-11-2025

$ 451.00 USD

Add to Wish List

Qty

$ 451.00 USD

Add to Wish List

A simple 30-minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high-quality case & wire harness with factory-style connectors for an easy plug-and-play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +41 horsepower and up to +58 lbs. x ft. of torque verified by our in house dyno. Direct Plug & Play Power: This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. In-Cabin On-the-Fly Power Adjustments: SCORCHER GT modules feature In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. High Quality Case & Wire Harness: aFe SCORCHER GT modules uses high-quality aluminum extrusion black powder-coated enclosure casing and factory-style connectors which require no modification to your factory harness. These factory-style connectors, plugs directly into the stock wiring harness connectors and sensors. High Precision and Quality: SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. aFe POWER does not recommend to use with any other tuners or modules. This SCORCHER GT is not CARB-exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. Quick and easy plug & play installation without any modifications Around 30 minute installation Dyno tested and produced significant power increases of +41 HP / +58 lbs. x ft. torque Increase turbo boost to improve vehicle performance, efficiency and throttle response In-cabin on-the-fly Power Adjustments via LED light switch 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) Leaves no trace on ECU (No Footprint) High-quality case & wire harness w/ factory style connectors High reliability, 100% of units tested Compatible with other aFe POWER performance products

Show More Show Less

RaceChip GTS 5 With App Controller For F32-F33, F36 430i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38419093

Part#: 924886

Ships in 4 Business Days

$ 758.00 USD

Add to Wish List

Qty

$ 758.00 USD

Add to Wish List

This GT5 has the potential for +66 horsepower, 70 lb-ft of torque, and up to 20% improved fuel efficiency!

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48 (CARB Appro...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40004849

Part#: JB4-B48-CARB

EO#: D-744-4

Ships on Jun 19, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

CARB APPROVAL: Approved Under Executive Order (EO) No. D-744-4 for all 2016-2018 BMW 230i, 330i, 430i, 530i, and X1 applications. The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29234292

Part#: 910.1010

Back Ordered

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Chips & Software for BMW 4 Series F32 (2014+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results