BMW Brakes & Brake Parts for BMW 4 Series F32 (2014+)

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

• Better stopping power even when the pads are cold
• Good initial bite (more than on Hawk HPS)
• Excellent resistance to fade during street use
• Moderate dust during normal street driving
• Quiet operation
• Easy on rotors

Fits the following BMWs:
2012+ F30/31/34 BMW 328i/i xDrive, 330i/i xDrive, 335i/i xDrive, 340i/i xDrive - Without M Sport Brakes
2012+ F32/33/36 BMW 428i/i xDrive, 430i/i xDrive, 435i/i xDrive, 440i/i xDrive - Without M Sport Brakes

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

• High performance for street use
• Excellent friction/torque at various temperatures
• Great feel and modulation
• Low noise
• Low-medium dust
• rotor friendly

Cool Carbon pads are sold as a set for each axle (4 pads total).

This item fits the following BMWs:
2014+ F22 F23 BMW M235i M235iX
2012-2015 F30 BMW 335i 335i X-Drive - Sedan
2012-2016 F32 BMW 435i 435i X-Drive - Coupe
2013-2016 F33 BMW 435i 435i X-Drive - Convertible
2012-2015 F34 BMW 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 435i 435i X-Drive - GranCoupe

The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.

Featuring:

• High Intial Bite
• Consistent torque over all pressures
• Operating Range:400-1600°F; 204-871°C
• High Temp & High Torque
• Provides Superior Pad and Disc Wear
• Excellent Torque Control
• Excellent Modulation and Release Characteristics
• Designed for High Deceleration Rates.

*Not for vehicles with Carbon Ceramic brake rotors.

Key Benefits:

• High-Performance: Specifically designed for high-speed, hard braking applications.
• Aggressive Stopping Power: Ideal for track use, ensuring quick and reliable deceleration.
• Temperature Resistant: Effective in high-torque situations, functioning optimally at elevated temperatures.
• Compatibility: Recommended to pair with DTC-70 for optimal front and rear axle performance.
• Versatile Options: Hawk provides a range of pads to suit both track and street driving needs.