BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 4 Series F32 (2014+)

BMW offers their M Performance retrofit kit for your 340i/i xDrive & 440i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

• M Performance Muffler
• M Performance Decal Kit
• Stick on label and Badge
• Performance BMW software upgrade code
• Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

• Carbon Fiber - Priced Each
• Chrome - Priced Each

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.
 

Ensure a perfect seal for your BMW's OEM, VRSF, or aftermarket high flow downpipes with our high-quality Grade 12 installation hardware and gaskets. Each set includes 4 bolts, nuts, washers, and 2 stainless steel gaskets suitable for N54/N55 engines. Designed for years and models specified below, these components guarantee optimal performance and compatibility. Additionally, turbo to downpipe gaskets and clamps are available separately, along with midpipe gaskets for the S55 engine.

• High-quality Grade 12 installation hardware and gaskets
• Ensures a perfect seal for OEM, VRSF, or aftermarket downpipes
• Suitable for N54/N55 engines
• Compatible with specified BMW years and models
• Turbo to downpipe gaskets and clamps available separately

Elevate your BMW's exhaust system with the Dinan High Flow Mid-pipe, delivering an aggressive tone to the stock setup. When paired with the Dinan exhaust, the sound is perfected into an irresistible aggressive growl. This full mid-section eliminates the factory center section, replacing it with straight-through 3.25" T304 stainless steel tubing. Experience improved flow, enhanced sound, and a weight reduction of 3 pounds.

• Achieve an aggressive tone with the stock system
• Perfected sound with Dinan exhaust for an aggressive growl
• Replaces factory center section for better flow
• Straight-through 3.25" T304 stainless steel tubing
• Enhanced performance and sound
• 3-pound weight reduction

The Dinan sport muffler is designed to compliment the 328/428 and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Dual 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan sport muffler is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2012-2015 F30 BMW 328i 328i X-Drive - Sedan
2012-2015 F31 BMW 328i X-Drive - Touring Wagon
2012-2016 F32 BMW 428i 428i X-Drive - Coupe

The Dinan sport muffler is designed to compliment the 340i and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Dual 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan sport muffler is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2012-2015 F30 BMW 328i 328i X-Drive - Sedan
2012-2016 F32 BMW 428i 428i X-Drive - Coupe

This plug is a replacement for the following models: 10901020A, 10901020B, 10901020C, 10901020D, 10301050, 10101020 and any other VRSF chargepipe that utilizes a water injection bung. VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07-16 BMW N54/ N55/ N20/ N26/ S55/ B58 is a crucial component for maintaining peak performance in turbocharged BMW engines. Designed to prevent boost leaks and ensure a secure seal for methanol and water injection ports, this bung plug is crafted from premium materials for long-lasting reliability. Compatible with VRSF chargepipes, it is an ideal solution for BMW enthusiasts seeking precision and durability in their high-performance setups. Available through Turner Motorsport, this part ensures seamless integration with your BMW's engine components.

Benefits: Ensures a secure seal for methanol and water injection ports to prevent boost leaks Built from high-quality materials for superior strength and longevity Compatible with VRSF chargepipes on 07-16 BMW N54, N55, N20, N26, S55, and B58 engines Easy installation minimizes downtime and simplifies engine upgrades Maintains optimal turbo efficiency and performance in high-pressure systems The VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07-16 BMW N54/ N55/ N20/ N26/ S55/ B58 is the ultimate choice for BMW owners committed to maximizing reliability and performance.

Dual clamp pipe connector joins exhaust pipes without welding. Split, compressible design clamps tightly around joined pipes for a leak-free fit. Includes hardware.

76.2mm (3.00 inch) diameter.