BMW Intake Parts for BMW 4 Series F32 (2014+)

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMC Performance Air Filter - 230i, 320i/i xDrive, 330e/i/i xDrive, 34...

T#:398738

Part#: FB928/20

In Stock at Vendor

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

Active Autowerke - Upgraded Air Charge Pipe - N55 F30, F32, F34, F87 ...

For RWD models only

T#:397303

Part#: 15-004

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i

Show More Show Less

Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N20 2.0L ...

T#:46890669

Part#: FMEDV110R

Ships in 4 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.

Show More Show Less

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Ships on Aug 14, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Forge B58 Charge Pipe Set - All B58

T#:586966

Part#: FMBP3

Ships in 4 Business Days

$ 626.99 USD

Add to Wish List

Qty

$ 626.99 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

Forge Aluminum Replacement Atmospheric Valve - N20

T#:399827

Part#: FMDVN20A

Ships in 4 Business Days

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less

Vargas Turbo Technologies B58 Intake Kit W/ Carbon Fiber Lid - F3X F2...

T#:6151362

Part#: B58MODINTAKECARB

Ships in 10 Business Days

$ 661.99 USD

Add to Wish List

Qty

$ 661.99 USD

Add to Wish List

VTT is proud to announce another product in their carbon fiber product line. The BMW F-Series B58 Carbon fiber intake system! They COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, and all of the restrictive bends. They then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with their billet intake connection for an OEM-like fit, and finish. VTT then created a 100% carbon factory-style intake top and coupled it with their stock-style high-flow cotton pre-oiled filters. These tops are 8 layers of 100% carbon, not a single layer wrapped over plastic and they are 1.3MM thick with the VTT logo vacuum printed onto the tops with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Features: 50 States Emissions Legal (Carbon fiber kit only. The Cone filter kit is legal for racing use only in California. Always follow all local emissions rules) Easy to install in 15-30 minutes even for a novice A Beautiful Carbon Fiber finish really adds class to the B58 engine bay Filters can be cleaned forever meaning never buy new filters Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow Completely reversible if you ever want to remove

Show More Show Less

BMC Performance Air Filter - F3X 335i 435i, F87 M2, F22/3 M235i ...

T#:398733

Part#: FB740/20

In Stock at Vendor

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

BMC Performance Air Filter - F22/23 228i, F3X 320i/i xDrive 328i/i xD...

T#:398727

Part#: FB702/20

In Stock at Vendor

$ 88.00 USD

Add to Wish List

Qty

$ 88.00 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Forge Motorsport Atmospheric Blowoff Valve - BMW N20 2.0 Turbo ...

T#:46890670

Part#: FMEDV110A

Back Ordered

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.

Show More Show Less

N55 TurboSmart KOMPACT EM DV - Dual Port

T#:7734722

Part#: N55TURBOSMARTDV

In Stock

$ 338.99 USD

Add to Wish List

Qty

$ 338.99 USD

Add to Wish List

Upgrade your BMW N55's turbocharger performance with the award-winning Kompact EM series Diverter Valves from VTT. These plug-and-play valves are the world’s first, offering seamless installation without adapters or extra assembly. By retaining OE control, they ensure optimal operation while minimizing leakage and enhancing turbocharger response. Ideal for owners of hybrid or larger flowing turbos, these valves boast superior thermal performance, providing a must-have solution for maximizing boost without stressing the turbocharger.

Seamless plug-and-play installation
Minimizes leakage for enhanced turbocharger performance
Retains OE control for optimal operation
Superior thermal performance to maximize boost without stressing the turbocharger

Show More Show Less

Recirculating Valve Kit - N20

T#:384540

Part#: FMDVN20R

Back Ordered

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

Back Ordered

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Vargas Turbo Technologies B58 Intake Kit W/ Cone Filter - F3X F22/23 ...

T#:6151361

Part#: B58MODINTAKECONE

Ships in 10 Business Days

$ 556.99 USD

Add to Wish List

Qty

$ 556.99 USD

Add to Wish List

VTT is proud to announce the BMW F-Series B58 intake system! They COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, and all of the restrictive bends. They then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with their billet intake connection for an OEM-like fit, and finish. This hose is paired with VTT's 4" high-flow cotton pre-oiled cone filters. Made from 100% carbon, not a single layer is wrapped over plastic. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Features: NOTE: The Cone filter intake kit is legal for RACING USE ONLY in California. Always follow all local emissions rules. (See ES4488513 for VTT's 50-State legal intake kit) Easy to install in 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow Completely reversible if you ever want to remove

Show More Show Less

Forge Motorsport Atmospheric Blowoff Valve - BMW N55 3.0L

T#:46890666

Part#: FMEDV104A

Ships in 6 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.

Show More Show Less

Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N55 3.0L ...

T#:46890667

Part#: FMEDV104R

Ships in 3 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.

Show More Show Less

Vargas Modular Carbon Fiber Intake Hose - GC/GC+ - BMW FXX B58 ...

For vehicles with VTT GC/GC+

T#:51883674

Part#: VTT-B58-MISGC

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

The VTT B58 Intake Hose is the ultimate solution for BMW owners looking to eliminate the restrictive factory intake without a full airbox replacement.

Vargas Modular Carbon Fiber Intake Hose - BMW FXX B58

For vehicles with stock turbo

T#:51883678

Part#: VTT-B58-MISST

Ships in 10 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

The Vargas B58 Modular Intake System is engineered to unlock the breathing potential of your BMW F-Series engine.

Forge Motorsport Front Mount Intercooler - N55/N20 F-Chassis ...

T#:5788178

Part#: FMINT135F20

Ships in 4 Business Days

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forge Motorsport's N55/N20 intercooler has been designed for the BMW vehicles with the N55 3.0 single turbo engine and N20 turbo engine. This intercooler has been designed to be a direct fit for OE with no further modifications to the bumper or body parts required. Forge has tested the intercooler with results indicating a temperature drop of 25 degrees, along with a moderate increase in power. Features: Forge designed and manufactured specifically for an engineered fit to your BMW Chassis. Utilizing a solid works designed high flow hand manufactured end tanks. High density bar & plate construction air core. A simple and easy direct bolt on to the OEM position. Includes all hardware needed to install.

Show More Show Less

Vargas High-Performance Drop-In Air Filter - Black - BMW F2X, F3X ...

T#:51848524

Part#: VTT-B58-FLTRB

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The VTT High-Performance Drop-In Air Filter is the "no-compromise" upgrade for BMW owners looking to unlock the breathing potential of their B58 engine.

Vargas High-Performance Drop-In Air Filter - Red - BMW B58 F2X, F3X ...

T#:51848522

Part#: VTT-B58-FLTRR

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The VTT High-Performance Drop-In Air Filter is the ultimate "OEM+" upgrade for BMW F-Series owners looking to unlock the breathing potential of the B58 engine.

Forge Silicone Vacuum Hoses

T#:558490

Part#: FORGEVAC

Ships on Aug 11, 2026

Starting at $ 14.99 USD

Add to Wish List

Starting at $ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

4MM Silicone Vacuum Hose - Blue - 9 Feet

T#:370917

Part#: VC04

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

3MM Silicone Vacuum Hose - Red - 9 Feet

T#:370915

Part#: VC03R

Back Ordered

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.