Oil Filter Housing for BMW 3 Series F34 (2014+)

Genuine BMW Oil Filter Cap

T#:22284

Part#: 11427525334

In Stock

2% off MSRP $ 54.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Qty

2% off MSRP

$ 54.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

If your oil filter housing cap is cracked or stripped, replace it with a fresh one from BMW.

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...

T#:43378539

Part#: B58G1OFH

In Stock

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344808

Part#: N54OFHGKT

In Stock

$ 171.99

This product was last offered at the strikethrough price on
08-18-2026

$ 171.14 USD

Add to Wish List

Qty

$ 171.14 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

Oil Filter Housing With Filter

T#:384694

Part#: 11428583895

In Stock

5% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

Qty

5% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

Includes housing, gasket, filter and cap

Genuine BMW Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3...

T#:27905105

Part#: 11428583895KT

Ships in 3 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Genuine BMW Engine Oil Filter Housing - Includes a new cap, seals, and oil filter (oil cooler not included and must be reused or purchased new - see BMW # 11428583901) Oil Cooler Mounting Hardware Oil Drain Plug Gasket Intake Manifold Gaskets Throttle Body Gasket Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Show More Show Less

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:27905122

Part#: 11428583895TKT

Ships in 3 Business Days

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Bremmen Engine Oil Filter Housing - Includes a new cap, seals, oil cooler, and oil filter Genuine BMW Oil Cooler Mounting Hardware Genuine BMW Oil Drain Plug Gasket Elring Intake Manifold Gaskets Elring Throttle Body Gasket Bav Auto Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Show More Show Less

Genuine BMW Asa-bolt - 11427540763

T#:35367

Part#: 11427540763

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Asa-Bolt - M8X43
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Asa-bolt - 11427540758

T#:35365

Part#: 11427540758

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Genuine BMW Asa-Bolt
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Oil Filter Housing Bolt - Pack Of 10

T#:574600

Part#: 11427540763KT

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Oil Filter Housing Gasket Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744018

Part#: 11427537293-KT

In Stock

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

If you have a leaking oil filter housing seal why not replace it while doing a oil service also and save down time on you car. The kit incudes a Oil service kit along with oil filter housing gasket, thermostat housing gasket.

Show More Show Less

Genuine BMW Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and ...

T#:27871825

Part#: 11428583896RKT

Ships in 1-2 days

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

One unfortunate problem BMW failed to address with the B58 engines is leaking oil filter housing gaskets. If your oil filter housing gaskets are leaking, you will notice a slow oil loss, pooling oil under your vehicle, and oil running down the left rear side of your engine block and on the side of your oil pan. This kit includes all-new gaskets to re-seal your filter housing plus Genuine BMW oil and a new filter to get your car back up and running and leak free!

Show More Show Less

Genuine BMW Asa-bolt - 11427540759

T#:35366

Part#: 11427540759

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Genuine BMW Asa-Bolt - M8X28
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and Gen2 B58 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:27871828

Part#: 11428583896TKT

Ships in 3 Business Days

Sale - Save 4% $ 150.99

This product was last offered at the strikethrough price on
08-26-2026

$ 144.93 USD

Add to Wish List

Qty

Sale - Save 4%

$ 150.99

This product was last offered at the strikethrough price on
08-26-2026

$ 144.93 USD

Add to Wish List

One unfortunate problem BMW failed to address with the B58 engines is leaking oil filter housing gaskets. If your oil filter housing gaskets are leaking, you will notice a slow oil loss, pooling oil under your vehicle, and oil running down the left rear side of your engine block and on the side of your oil pan. This kit includes all-new gaskets to re-seal your filter housing plus Liqui-Moly oil and a new Hengst filter to get your car back up and running and leak-free!

Show More Show Less

Genuine BMW Engine Oil Filter Housing Replacement Kit - BMW F22/23 F3...

T#:48780825

Part#: 11428596283KT

Ships in 1-2 days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

By replacing the original plastic oil filter housing with an aluminum housing, you can prevent potential cracks and leaks in your engine oil assembly.

Project Cars

SELECT YOUR BMW

Oil Filter Housing for BMW 3 Series F34 (2014+)

Genuine BMW Oil Filter Cap

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...

Improved Racing BMW Oil Cooler Thermostat (180F)

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

Oil Filter Housing With Filter

Genuine BMW Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3...

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

Genuine BMW Asa-bolt - 11427540763

Genuine BMW Asa-bolt - 11427540758

Oil Filter Housing Bolt - Pack Of 10

Oil Filter Housing Gasket Replacement Kit

Genuine BMW Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and ...

Genuine BMW Asa-bolt - 11427540759

Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and Gen2 B58 3.0...

Genuine BMW Engine Oil Filter Housing Replacement Kit - BMW F22/23 F3...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results