BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 3 Series F34 (2014+)

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.

This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
All models with the N20 or N26 motor

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

• Stainless steel construction
• Multi-chamber design for increased performance
• Chambered muffler performance sound

This N20 downpipe feature larger piping and catalytic converter that are freer-flowing than the original cats for better flow and less backpressure. By removing exhaust restrictions the turbos can spool up faster which makes more boost sooner. With additional tuning, more power is available. There are downpipes that delete the primary cats and can leave the exhaust with a dirty and awful smell. These Wagner downpipes are built with a sport cat to keep the exhaust cleaner.Special software, or stand-alone engine management, may be required to keep emissions fault codes and check engine lights from appearing.

Features:

• 200cpi Catalytic Converter
• 100% perfect fit - CAD designed.
• less thermal load on the turbocharger
• more power by reducing back pressure
• significantly more torque
• Made from 1.4301 (SS304) Stainless Steel
  
   

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

This item fits the following BMWs:
2014+ F22 BMW 228i
10/2012+ F30 BMW 328i 328i xDrive 328xi - Sedan (with N20 engine; not for N26 SULEV engine)
2014+ F32 BMW 428i 428i xDrive 428xi - Coupe (with N20 engine; not for N26 SULEV engine)
Left Hand Drive ONLY

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. 

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G

Wagner downpipes for F30 feature larger piping and catalytic converter that are freer-flowing than the original cats for better flow and less backpressure. By removing exhaust restrictions the turbos can spool up faster which makes more boost sooner. With additional tuning, more power is available. There are downpipes that delete the primary cats and can leave the exhaust with a dirty and awful smell. These Wagner downpipes are built with a sport cat to keep the exhaust cleaner.Special software, or stand-alone engine management, will be required to keep emissions fault codes and check engine lights from appearing.

Features:

• 200cpi Catalytic Converter
• 100% perfect fit - CAD designed.
• less thermal load on the turbocharger
• more power by reducing back pressure
• significantly more torque
• connection diameter 105mm
• Made from 1.4301 (SS304) Stainless Steel
  
  
   
•  

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

This item fits the following BMWs with the N55 engine:
2012-6/2013 F30 BMW 335i 335i xDrive - Sedan
Left Hand Drive ONLY

Want to install a downpipe on your B58 equipped BMW, but still need to pass emissions? Evolution Racewerks has the answer for you with their B58 Catted downpipe. The Evolution Racewerks Competition Series Catless Downpipes is constructed from 304 stainless steel, featuring mandrel bent piping.  These are 100% TIG welded by in house fabricators and built in the USA! 

The factory turbocharger turbine housing utilizes a V-Band flange which has been duplicated and CNC machined cut out of billet 304 stainless steel. Stainless Steel CNC machined O2 sensor and laser cut brackets are TIG welded using stainless steel rods. The O2 sensor remains positioned at the factory location. Also, since Evolution Racewerks uses a larger 4.5" pipe right after the turbocharger, turbo backpressure is significantly reduced, resulting in less exhaust turbulence and backpressure which again improves throttle response and decreasing turbo lag.

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - up to 08/2013

BMW B58 3.0L Oxygen Sensor - Downstream is essential for maintaining optimal engine performance and fuel efficiency. Turner Motorsport offers this high-quality replacement sensor designed to precisely measure exhaust oxygen levels, allowing the vehicle's computer to accurately adjust the air/fuel ratio and monitor emissions. A degraded oxygen sensor can lead to decreased engine performance, reduced fuel efficiency, and increased harmful emissions, potentially triggering the Check Engine Light and causing a failure in emissions testing.

• Ensures Optimal Engine Performance: Accurately measures exhaust oxygen levels for precise air/fuel ratio adjustments.
• Improves Fuel Efficiency: Helps maintain proper fuel mixture, reducing fuel consumption.
• Reduces Harmful Emissions: Keeps emissions in check, ensuring compliance with environmental standards.
• Prevents Check Engine Light Activation: Helps avoid unnecessary warning lights and potential emissions test failures.
• Quality Replacement: High-grade sensor designed specifically for the BMW B58 3.0L engine.

BMW enthusiasts looking to fabricate a custom exhaust project will find quality and price-friendly options in the ECS Tuning Universal Exhaust catalog. These select items feature the same premium benefits as our In-House Engineered Exhaust Systems, ensuring confidence in their quality and longevity.

Part Design:

• Made from T304 Stainless Steel for corrosion resistance with an attractive brushed finish
• 3.0" outside diameter (OD)
• 1.5mm (.060") wall thickness tubing for durability
• U-Bend Centerline Radius - 5.0" @ 180° angle
• Leg Length "A" - 7.0"
• Leg Length "B" - 14.0"
• Leg Length "C" - 27.0"

Product Development:

• Developed top-tier exhaust components through our In-House Engineered Exhaust Systems
• Direct-fit components for specific European applications now available for custom exhaust projects

Installation and Support:

• Universal parts with no direct fitment to any particular vehicle
• Custom welding and fabrication required
• Special prep/clean procedures must be followed for proper welding due to brushed finish

Elevate your BMW with ECS Tuning Universal Exhaust components, designed for quality and durability in custom exhaust projects.