BMW Engine Parts for BMW F83 M4 S55 3.0L

OEM Pierburg VANOS Solenoid - BMW N55 S55 N63 S63

T#:27638815

Part#: 11368605123

Back Ordered

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

The VANOS solenoid controls variable camshaft timing by controlling oil flow to the VANOS adjustment unit. These commonly fail at higher milages but are easy to replace. If your VANOS solenoid has failed, you could experience rough running conditions, a loss of power, and a check engine light. Replace your faulty solenoid with this OEM unit from Pierburg to restore smooth engine operation and power. Two are required for models with an N55 or S55 engine Four are required for models with an N63 or S63 engine

Show More Show Less

King Performance BMW N54B30A/N55B30A Rod Bearings - 2 Pairs

For Vehicle Models 2015-2016

T#:25706094

Part#: CR222GPC

In Stock

13% off MSRP $ 128.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

13% off MSRP

$ 128.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. This kit includes a full set of bearing shells!

Show More Show Less

IWIS Chain Tensioner - With Gasket Ring - BMW N52 N54 N55 3.0L ...

T#:43378595

Part#: 11317584723

Ships in 3 Business Days

$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Over time, your engine timing components begin to wear out. Tensioners weaken, chains can stretch, and timing chain guides can wear down. All of these lead to the possibility of the timing chain jumping teeth on the sprockets, causing your timing to shift. This could result in rough idle and reduced engine power, or even complete engine failure. Prevent damage to your engine with new timing components, such as this IWIS timing chain tensioner. Note, we recommend replacing timing components every 100K miles, or sooner, depending on the condition of the timing components.

Show More Show Less

Genuine BMW Timing Chain Tensioner - F8X N55

T#:181000

Part#: 11417618943

In Stock

6% off MSRP $ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 115.99 USD

Add to Wish List

Qty

6% off MSRP

$ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 115.99 USD

Add to Wish List

Genuine BMW Chain Tensioner

Powerflex Engine Mount Inserts - F8X M2/M3/M4 Race(Black)

T#:6924328

Part#: PFF5-4021BLK

In Stock

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Powerflex is pleased to introduce their new S55 Engine Mount Inserts, intermediate alternatives to the BMW aluminum inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in Black 70A durometer material, they are designed to fit the OE mounts snuggly to restrict engine movement with a minimal increase in NVH, perfect for those with tuned road cars. Their design and flexibility also mean they can be fitted to the vehicle without removing the engine mounts themselves. Reducing engine/transmission movement by way of upgraded inserts has the following benefits: Sharper throttle response Improved gear shifting More direct power transfer More balanced on/off throttle handling Prolonged life of the OE mounts *Yellow version pictured for installation reference A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted.

Show More Show Less

Genuine BMW Exhaust Valve - F82 F83 F84 M3 M4 S55 3.0L

T#:194184

Part#: 11347847033

Ships in 6 Business Days

6% off MSRP $ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Qty

6% off MSRP

$ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Genuine BMW Exhaust Valve

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Fuel Vent Charcoal Canister

T#:538308

Part#: 16137464301

Ships in 3 Business Days

9% off MSRP $ 526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 481.99 USD

Add to Wish List

Qty

9% off MSRP

$ 526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 481.99 USD

Add to Wish List

Genuine BMW replacement charcoal filter. If your getting evap codes or having trouble at the gas pump with the pump stopping often. The problem could be found with a blocked charcoal filter.

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

Back Ordered

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

1/2" Drive 45-Tooth Digital Torque Wrench

10X Entries Into Our F80 M3 Sweepstakes

T#:396471

Part#: 023380SCH01A

In Stock

Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer.

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

Setting Range: 45-220 ft lbs (60-300 Nm)
Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
Size: 22" (550mm) length for easy leverage
Accuracy: +- 3%
Include blow molded holding case
Requires one 3V CR2030 battery (included)

Show More Show Less

Liqui Moly Longtime High Tech Oil Change Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644259

Part#: 07119963129-KT

Ships in 2 Business Days

Sale - Save 6% $ 115.98

This product was last offered at the strikethrough price on
08-31-2026

$ 108.63 USD

Add to Wish List

Qty

Sale - Save 6%

$ 115.98

This product was last offered at the strikethrough price on
08-31-2026

$ 108.63 USD

Add to Wish List

To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Seven Liters of Liqui Moly Longtime High Tech Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)

Show More Show Less

DeatschWerks Performance Fuel Injector Set - 50lb/hr(550cc)

For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!

T#:6151339

Part#: 16U-00-0050-6

In Stock

$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 50lb/hr 550cc injectors. All relevant tuning data available on DeatschWerks website.

Show More Show Less

Schwaben 12 Ft 6 Gauge Booster Cables

10X Entries Into Our F80 M3 Sweepstakes

T#:378531

Part#: 007269SCH01

In Stock

Sale - Save 33% $ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 33%

$ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.99 USD

Add to Wish List

Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.

Hella Hella Horn - Low Tone

T#:590880

Part#: 2768082

Ships on Oct 7, 2026

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Disc Type Low-Tone, 12 V, 335 Hz with Bracket

BLACKLINE Performance F Series Washer Fluid Cap - Gray

T#:4565848

Part#: FXXWFCG

Ships in 5 Business Days

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Full replacement Billet Washer Fluid Cap for BMW F Series vehicles!

Genuine BMW Ignition Coil - Set Of Six

T#:359459

Part#: 12138616153S6KT

In Stock

$ 521.99

This product was last offered at the strikethrough price on
08-04-2026

$ 516.99 USD

Add to Wish List

Qty

$ 516.99 USD

Add to Wish List

URO Fuel Pump O-Ring - 16117188567

2X Entries Into Our F80 M3 Sweepstakes

T#:28271184

Part#: 16117188567

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Key Features:

Ensures a perfect fit for your vehicle Instantly restores proper sealing and fuel delivery by replacing the failed fuel pump o-ring Features a direct-fit OE-style design for easy installation and extended durability Crafted from high-quality elastomer material capable of withstanding exposure to corrosive hydrocarbon fuel and intense vehicle heat

Show More Show Less

Genuine BMW S55 Engine Mount - Right - F80 M3,F82,F83

T#:211523

Part#: 22112284818

In Stock

6% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Qty

6% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Genuine BMW Rubber Mounting Right -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

IRP Crank Bolt Capture - BMW N55/S55

T#:5309585

Part#: IRPCBC-55

In Stock

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Prevent your crank bolt from spinning with IRP's N55/S55 engine bolt fixture. As the spinning of the crank bolt has been a known issue for both the N55 and S55 motors, this is a must have to ensure that your engine stays in working condition! Features: Composed of lightweight billet aluminum Includes crank bolt capture and 8 fasteners

Show More Show Less

BMW Flywheel Holder - N52 N54 N55 S55 M57

T#:24212285

Part#: 118180

In Stock

$ 232.99 USD

Add to Wish List

Qty

$ 232.99 USD

Add to Wish List

Replaces BMW tool # 83300493587 (118180) This tool is often used when replacing the vibration damper (harmonic balancer), when replacing the crankshaft or crankshaft seals, and when replacing the timing chain. BMW Flywheel Holder for M47T2, M47TU, M57TU, M67, N45, N45T, N46, N46T, N51, N52, N53, N54, N55 & W17 with Manual trans. Also S55 stick and auto trans.

Show More Show Less

Mishimoto Performance Direct-Fit Oil Cooler - F8X M2 M3 M4 S55 ...

T#:637357

Part#: MMOC-F80-15

Ships in 4 Business Days

$ 609.99

This product was last offered at the strikethrough price on
08-13-2026

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler. True to form, the engineers at BMW designed the M3/M4’s oil cooler with efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer’s aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where it should be. We also added 10mm to the core’s thickness, equating in a 46% increase in core volume, and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition Full aluminum TIG-welded construction 46% increase in core volume Increases oil capacity by .44 quarts Robust bar-and-plate construction for improved durability and heat rejection Silver powder-coated finish for maximum protection No cutting or modifications required Mishimoto Lifetime Warranty Included: (1) Performance Oil Cooler (2) Replacement O-Rings Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Clean Oil Drain Plugs - M12 x 1.5mm

T#:5135644

Part#: AGA-CODP-12-15

Ships in 8 Business Days

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Change the way you change oil

Genuine BMW Guide Rail - 11417618941

T#:180999

Part#: 11417618941

In Stock

7% off MSRP $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD

Add to Wish List

Qty

7% off MSRP

$ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD

Add to Wish List

Genuine BMW Guide Rail -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Hella Hella Horn - High Tone

T#:592707

Part#: 2768551

Ships in 2 Business Days

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Disc Type High-Tone, 12 V, 400 Hz with Bracket

URO Oxygen Sensor - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:38094317

Part#: 11787848482

In Stock

$ 109.25 USD

Add to Wish List

Qty

$ 109.25 USD

Add to Wish List

Located before the catalytic converter on the longer downpipe, also considered the upstream O2 sensor.

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

T#:19891361

Part#: MMR20-1004

Ships in 3 Business Days

$ 1,064.99 USD

Add to Wish List

Qty

$ 1,064.99 USD

Add to Wish List

Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower

Show More Show Less

OEM Mitsubishi Turbocharger With Manifold - Cyl 4-6 - F87 M2 Comp, F8...

T#:600200

Part#: 11657849651

In Stock

$ 1,143.99 USD

Add to Wish List

Qty

$ 1,143.99 USD

Add to Wish List

This is an OEM replacement rear (bank 2) turbo assembly for the S55 engine in the F8X M2 Competition, M3, and M4. This is a new turbo from Mitsubishi, not a rebuilt unit. This is a complete assembly, including the manifold to the engine and the wastegate. Signs of a failing turbo are high oil consumption and blue smoke from the exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems, the turbos need to be replaced. This is a new turbo - No core charge.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships on Sep 29, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM Mitsubishi Turbocharger With Manifold - Cyl 1-3 - F87 M2 Comp, F8...

T#:600199

Part#: 11657849650

In Stock

$ 1,115.99 USD

Add to Wish List

Qty

$ 1,115.99 USD

Add to Wish List

This is OEM replacement front (bank 1) turbo assembly for the S55 engine in the F8X M2 Competition, M3, and M4. This is a new turbo from Mitsubishi, not a rebuilt unit. This is a complete assembly, including the manifold to the engine and the wastegate. Signs of a failing turbo are high oil consumption and blue smoke from the exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems, the turbos need to be replaced. This is a new turbo - No core charge.

Show More Show Less

407 Piece O-Ring Assortment

T#:1809147

Part#: W5202

In Stock at Vendor

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Nitrile Butadiene Rubber

Universal Valve Spring Compressor

T#:1809130

Part#: W89409

Ships in 2 Business Days

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

F8X - S55 EKP PNP Cooler Kit

A Must For Cars With Upgraded LPFPs

T#:26471618

Part#: AT225F22BLA501S5

Ships in 2 Business Days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F80, F82, F83, and F87 (Comp) BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

OEM Elring Cylinder Head Valve Cover - BMW S55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:45005552

Part#: B39.880

Ships in 3 Business Days

$ 480.99 USD

Add to Wish List

Qty

$ 480.99 USD

Add to Wish List

If your valve cover has warped or cracked due to years of heat cycles, this replacement from Elring is just what you need to eliminate leaks and get rid of check engine lights! Replaces BMW p/n 11127846359

Show More Show Less

Genuine BMW Knock Sensor

T#:14966

Part#: 13627566786

In Stock

9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Qty

9% off MSRP

$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Genuine BMW Ping Sensor
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N54,N54T,N55,S55

Show More Show Less

Genuine BMW High Pressure Fuel Pressure Sensor - N55 3.0L, B38 1.5L, ...

T#:42256

Part#: 13537620946

Ships in 3 Business Days

9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

9% off MSRP

$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW Sensor, High-Pressure

Genuine BMW Oil spray nozzle - N55 3.0L

T#:34782

Part#: 11377583786

In Stock

2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

2% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Oil Spraying Nozzle -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less

Genuine BMW Accessory Belt - F80 M3,F82 M4,F83

T#:194158

Part#: 11287848605

In Stock

7% off MSRP $ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD

Add to Wish List

Qty

7% off MSRP

$ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD

Add to Wish List

If your belt has begun to squeal, make sure you replace it soon to avoid stoplight embarrassment and potential accessory failure. Even if your belt is not making noise, its a good idea to replace these every 60,000 miles.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F8X S55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:22163426

Part#: 11287848605TKT

Ships on Nov 12, 2026

$ 414.99

This product was last offered at the strikethrough price on
08-07-2026

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Mosselman S55 Billet Oil Thermostat - Black - BMW F8X S55 3.0L ...

T#:37183641

Part#: 030210062BLK

Ships on Oct 2, 2026

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

The S55 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.

Show More Show Less

King Performance BMW N54/N55 Rod Bearings - 2 Pairs

For Vehicle Models 2015-2016

T#:25706102

Part#: CR222GPC026

In Stock

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Set of 4 Bearing Shells - .026 Oversize

Show More Show Less

GENIUS 6 Volt / 12 Volt 5A Battery Charger - NOCO

T#:641140

Part#: GENIUS5

Ships in 9 Business Days

22% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

Qty

22% off MSRP

$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

The GENIUS5 is an exceptional addition to our lineup boasting incredible power, top-notch performance, energy efficiency, and a compact design. The GENIUS5 is a versatile 6-volt and 12-volt charger, maintainer, and desulfator with a 5-amp rating. It's engineered for use with lead-acid batteries in automotive, marine, and deep-cycle applications, covering flooded, gel, AGM, maintenance-free variants, and even lithium-ion batteries.

Features:

Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

Ships in 4 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

VAC Harmonic S55 SuperDamper By ATI

T#:639880

Part#: VAC-HPCD-S55

In Stock

$ 989.99 USD

Add to Wish List

Qty

$ 989.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley. Made in the USA.

Show More Show Less

BMW Secondary Pump Activation Harness - BMW E9X F22/23 F3X F8X ...

T#:38094337

Part#: 201-0049

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.

Show More Show Less

Walbro Ultra High-Performance Fuel Pump - (Universal E85 Ethanol) - T...

T#:23020149

Part#: F90000295

In Stock at Vendor

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

New DCSS 39/50 High-Performance Pump – F90000295

Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
Featuring award-winning DCSS technology
E85 compatible
High-pressure relief setting - supports supercharger and turbo applications
Capable of supporting 900+HP at 60PSI naturally aspirated applications
Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Genuine BMW Intake Manifold Gasket

T#:36571

Part#: 11617588624

In Stock

4% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

4% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Don't let a leaking gasket rob your performance. Replace it with a Genuine BMW gasket and enjoy smooth reliable performance.

1/2-inch Drive 18mm VANOS Flush-Cut Socket

10X Entries Into Our F80 M3 Sweepstakes

T#:394202

Part#: 012016ECS03A

In Stock

Sale - Save 16% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD

Add to Wish List

Qty

Sale - Save 16%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD

Add to Wish List

Boost X UltraSafe Lithium 2500A Jump Starter - NOCO

T#:2498430

Part#: GBX75

Ships in 9 Business Days

22% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD

Add to Wish List

Qty

22% off MSRP

$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD

Add to Wish List

The NOCO Boost X GBX75 is a portable lithium jump starter crafted for 12-volt batteries in vehicles with gasoline engines up to 8.5 liters and diesel engines up to 6.5 liters. This versatile tool is suitable for a wide array of vehicles, including cars, motorcycles, trucks, ATVs, boats, RVs, vans, SUVs, tractors, and more. Featuring an all-new design, the GBX75 offers extreme jump-starting power, ensuring robust engine starts with ease. With a rating of 2500 amps, this portable lithium car battery jump starter delivers maximum energy with each start. It's not just an upgrade; it's part of our new Extreme Series, delivering exceptional performance and reliability.

Features:

Equipped with USB-C technology that, combined with power delivery, gives you lightning-fast recharges. Completely recharges in just 1.8-hours, or go from 0% to jump starting in just 5-minutes of charge.
Charge everything with USB-C Power Delivery. Its internal power bank provides 60-watts of power - both in and out - to effortlessly power your favorite USB-C devices, like phones, tablets, laptops, wearables, and more.
We took our UltraSafe technology and made it better. It's still our simple, mistake-free design featuring spark-proof technology and reverse polarity protection, but with enhanced thermal efficiency and power management to provide better performance and longer battery life.
It's one of the most versatile lithium jump starters ever. Jump start all vehicle types, including cars, motorcycles, trucks, ATVs, boats, RVs, vans, SUVs, tractors, and more for up to 8.5-liter gasoline and 6.5-liter diesel engines.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Blackline Performance Chargecooler Coolant Tank Cap Cover - Gray - BM...

T#:641290

Part#: FXXCCT

In Stock

$ 52.00 USD

Add to Wish List

Qty

$ 52.00 USD

Add to Wish List

Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in the following vehicles: F87 M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW F83 M4 S55 3.0L

Sub-Categories

New DCSS 39/50 High-Performance Pump – F90000295

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results