BMW Engine Parts for BMW F97 X3 M S58 3.0L

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

Ships in 10 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

ReFlex+ Advanced I/O Integration - BMW B58/S58 Plug-n-Play - MOTIV/Vi...

T#:49648341

Part#: 910.1027

In Stock

$ 1,344.00 USD

Add to Wish List

Qty

$ 1,344.00 USD

Add to Wish List

NOTE: Select PT-CAN2 for all MHD+ and EcuTek cars with automatic transmissions. For BM3 and all manual transmission cars select PT-CAN.

ARP Harmonic Damper Bolt Set - BMW S58

T#:49092362

Part#: ARP-CBS-S58

Ships in 10 Business Days

$ 134.99 USD

Add to Wish List

Qty

$ 134.99 USD

Add to Wish List

The OE crank bolts are grade 10 torque-to-yield bolts, designed for only a single use. For vehicles making stock power, the stock bolts are more than enough. Unfortunately, vehicles making more power than stock have experienced issues with the stock damper bolts coming loose and breaking, leading to engine and crank damage. 5150 AutoSport worked with ARP to create this ARP Harmonic Damper Bolt Set to address this issue. These upgraded bolts are stronger than the factory bolts and are designed to provide even repeatable torque load, preventing them from breaking and allowing them to be re-torqued as needed.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT S58 Turbocharger Install Kit - BMW S58 3.0L

T#:49023067

Part#: VTT-S58-INSTL

Ships in 10 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Everything needed for a successful install without having to make a trip to the dealer

Genuine BMW Oil Filter Gasket - S58

T#:50898995

Part#: 11428469100

Ships in 3 Business Days

4% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

4% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Gemini said Seal your S58 oiling system with this filter gasket and hardware!

URO Fuel Tank Vent Valve - 13907643106

T#:50031887

Part#: 13907643106

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Replaces broken or failing vent valve.

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

OEM Bosch Fuel Injector Replacement Kit - BMW S58 3.0L

T#:51426465

Part#: BS58FIRKT

Ships in 1 Business Day

$ 273.99

This product was last offered at the strikethrough price on
05-07-2026

$ 267.99 USD

Add to Wish List

Qty

$ 267.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

MHD DME Unlocker - BMW B48 B58 S58 S63 (Pre-06/20)

For vehicles with a production date before 06/2020

T#:54852023

Part#: MHD-UNLOCKER

Ships on Aug 11, 2026

$ 373.99 USD

Add to Wish List

Qty

$ 373.99 USD

Add to Wish List

MHD Unlocker with a plug and play harness/connections - Simple and easy unlock at home in a few minutes!

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

T#:51778123

Part#: VTT-S58-SINGLE-H

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

OEM Mitsubishi Turbocharger With Exhaust Manifold - Cyl 1-3 (Bank 1) ...

T#:53290947

Part#: 11658469097

In Stock

$ 1,916.99 USD

Add to Wish List

Qty

$ 1,916.99 USD

Add to Wish List

Failure of the original factory turbochargers can result in excessive smoke from the tailpipe, rattling or loud whining noises from the turbocharger, and reduced power output. Turbo failure is almost always caused by a failed internal bearing and/or seals, which is often a result of leaking oil lines or coolant lines. Restore your BMW's performance and reliability with a brand-new Turbocharger directly from Mitsubishi, the manufacturer of the factory turbochargers for the BMW S58 engine.

Show More Show Less

Schwaben Piston Ring Specialty Toolset

T#:53361638

Part#: 3594SCH01AKT

In Stock

Sale - Save 7% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Qty

Sale - Save 7%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Whether you are building a high-performance engine or simply performing a routine rebuild, getting your piston ring end gaps and installation right is critical for optimal engine performance, compression, and longevity. Designed to meet strict standards, this comprehensive toolset provides everything you need to file, measure, and install piston rings safely without causing damage.

KIT CONTENTS

Schwaben Piston Ring Filer

Easily modify piston rings for OEM engine rebuilds and boosted applications Cuts quickly and smoothly, allowing you to easily avoid filing in excess Durable, bench-mountable construction with a long-lasting diamond abrasive wheel Piston Ring Installation Tool

Ensures even tension distribution during expansion Accommodates all pistons ranging from 60 mm to 175 mm in diameter Features an easy thumb-release locking mechanism for quick and secure operation Feeler Gauge Set

16 blades - 0.002-0.025 inch thickness measurements

Show More Show Less

OEM Mitsubishi Turbocharger & Exhaust Manifold Replacement Set - BMW ...

T#:53290951

Part#: 11658469097-98KT

In Stock

Sale - Save 3% $ 3,833.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,718.97 USD

Add to Wish List

Qty

Sale - Save 3%

$ 3,833.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,718.97 USD

Add to Wish List

Failure of the original factory turbochargers can result in excessive smoke from the tailpipe, rattling or loud whining noises from the turbocharger, and reduced power output. Turbo failure is almost always caused by a failed internal bearing and/or seals, which is often a result of leaking oil lines or coolant lines. Restore your BMW's performance and reliability with a brand-new set of turbochargers directly from Mitsubishi, the manufacturer of the factory turbochargers for the BMW S58 engine.

Show More Show Less

OEM Mitsubishi Turbocharger With Exhaust Manifold - Cyl 4-6 (Bank 2) ...

T#:53290948

Part#: 11658469098

In Stock

$ 1,916.99 USD

Add to Wish List

Qty

$ 1,916.99 USD

Add to Wish List

Failure of the original factory turbochargers can result in excessive smoke from the tailpipe, rattling or loud whining noises from the turbocharger, and reduced power output. Turbo failure is almost always caused by a failed internal bearing and/or seals, which is often a result of leaking oil lines or coolant lines. Restore your BMW's performance and reliability with a brand-new Turbocharger directly from Mitsubishi, the manufacturer of the factory turbochargers for the BMW S58 engine.

Show More Show Less

Pro-Line Injector And Glow Plug Grease - 20g

T#:49787695

Part#: 22243

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

Shifter Rebuild Hardware Kit

T#:55209882

Part#: 07119905KT

In Stock

$ 4.80 USD

Add to Wish List

Qty

$ 4.80 USD

Add to Wish List

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Second Fuel Rail Kit for CSF B58 & S58 Air-to-Air Billet Manifolds ...

T#:56001929

Part#: CSF8404

Ships in 3 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Eliminate fuel starvation on your high boost S58 or B58 build with this track engineered, billet aluminum secondary port injection rail built to handle extreme fueling demands.

NRW Design S58 Billet Valve Cover - With Swivel Fittings & Gasket Kit...

T#:48850078

Part#: S58BVC-2

Ships in 3 Business Days

$ 3,199.99 USD

Add to Wish List

Qty

$ 3,199.99 USD

Add to Wish List

NRW's S58 Billet Valve Cover is the premier solution for BMW enthusiasts looking to upgrade the reliability, performance, and appearance of their S58 engine. Designed to replace the factory plastic valve cover, this CNC-machined aluminum upgrade is engineered to handle the extreme demands of high-performance and tuned BMW applications. Available through ECS Tuning, the NRW Billet Valve Cover delivers the strength and durability needed to support increased boost, heat, and power output in motorsport and street environments alike. Built with precision fitment for S58-equipped models such as the BMW G80 M3, G82 M4, and F97 X3M, this valve cover provides long-term sealing and eliminates common issues like warping, oil leakage, and cracked housings. Its clean, anodized finish makes it the ideal choice for aggressive builds and custom engine bay setups. PLEASE NOTE: This is not a direct replacement for the factory cover. This billet cover bypasses the factory PCV system and is designed to be used with a catch can setup for excess crankcase pressure, featuring two -10 ORB ports with -10 ORB to AN swivel fittings pre-installed for easy installation. (Catch can and plumbing not included)

Show More Show Less

Battery Tender Plus Advanced Battery Charging System

T#:49892371

Part#: BTT0210128

In Stock at Vendor

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

CSF "No Limit" Billet Air-to-Air Competition Manifold - BMW F9X X3M/X...

Lead time may vary, call for availability.

T#:52375803

Part#: CSF8402S58

Ships in 3 Business Days

$ 3,995.00 USD

Add to Wish List

Qty

$ 3,995.00 USD

Add to Wish List

This "No Limit" manifold from CSF is engineered for extreme-duty drag racing and high-horsepower builds aiming to surpass the 1500 WHP mark.

Pure Turbos S58 PURE1000 Turbo Upgrade - BMW G80 G82/83 F97/F98 S58 3...

T#:56038094

Part#: S58P1000

Ships in 4 Business Days

$ 4,495.00 USD

Add to Wish List

Qty

$ 4,495.00 USD

Add to Wish List

While the S58 is a formidable engine straight from the factory, the stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers their Pure1000 turbo upgrade package for those looking to reliably increase power to 900+ whp with supporting modifications.

Show More Show Less

Vargas Coolant Level Extension Harness - BMW B48/B58/S58

T#:51813310

Part#: VTT-FAB-HC

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Billet Front Oil Feed Adapter - 4 AN Male - BMW S58 Engines ...

T#:52094558

Part#: VTT-FAB-037

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The Vargas VTT-FAB-037 is a precision-engineered billet aluminum adapter specifically designed for high-performance BMW S58 engine platforms.

PFS Port Injection Kit - BMW G8X/F9X S58

T#:52164908

Part#: PFS-S58-PI-NONE

Ships in 10 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

The PFS S58 Port Injection Kit by Vargas Turbo Technologies is the solution for BMW owners who have reached the limits of their factory injection.

Vargas High Flow Catch Can System - BMW F9X X3M, X4M

T#:51918843

Part#: VTT-HFCCF9X12

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The VTT High-Flow Catch Can System is the definitive solution for F9X X3M and X4M owners pushing the limits of the S58 engine.

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

T#:51672717

Part#: VTT-MAP-HARNESS

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...

For vehicles with VTT Billet & Cast Valve Covers

T#:52270290

Part#: OC16OADAPSC

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.

Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F...

T#:52164930

Part#: S58PIBLORAIL

Ships in 10 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Maximize the versatility of your BMW S58 fuel system with the Vargas Turbo Technologies Port Injection Block Off Kit with Rail.

Vargas Remote Oil Filter Kit - BMW G8X F9X S58

T#:52164914

Part#: S58OFILTCOMP

Ships in 10 Business Days

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Engineered for the demands of high-performance racing, the VTT S58 Remote Oil Filter Kit is a modular oiling upgrade designed to optimize the BMW S58 platform.

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Vargas Port Injector Block Off Blanks - BMW G8X F9X S58

T#:52164927

Part#: S58PIBLOBLANKS

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

Vargas Remote Oil Filter Plate & Fittings - -10AN - BMW S58

T#:52164924

Part#: S58OFILPLATE

Ships in 10 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

For dedicated drag racing applications where every ounce of weight and simplicity matters, the VTT S58 Remote Oil Plate is the ultimate "delete" solution.

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

T#:52129707

Part#: VTT-FAB-064

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.

Vargas Front Oil Feed Block-Off - BMW S58 Engine

T#:52094559

Part#: VTT-FAB-038

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB-038 Billet Front Oil Feed Block-Off is a precision-engineered solution for enthusiasts and fabricators building custom turbocharger systems.

BM3 Flex Fuel Kit - F97/F98 X3M/ X4M Pre-LCI

T#:54852021

Part#: BM3FFKF97F98

Ships in 10 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

Hitachi Ignition Coil - BMW B58 B48/46 B38

T#:48850056

Part#: 12137619385

Ships in 6 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Get your engine's spark back with new ignition coils.

NRW Design S58 Billet Valve Cover - W/O Swivel Fittings & Gasket Kit ...

T#:48850077

Part#: S58BVC-1

Ships in 3 Business Days

$ 2,995.99 USD

Add to Wish List

Qty

$ 2,995.99 USD

Add to Wish List

NRW's S58 Billet Valve Cover is the premier solution for BMW enthusiasts looking to upgrade the reliability, performance, and appearance of their S58 engine. Designed to replace the factory plastic valve cover, this CNC-machined aluminum upgrade is engineered to handle the extreme demands of high-performance and tuned BMW applications. Available through ECS Tuning, the NRW Billet Valve Cover delivers the strength and durability needed to support increased boost, heat, and power output in motorsport and street environments alike. Built with precision fitment for S58-equipped models such as the BMW G80 M3, G82 M4, and F97 X3M, this valve cover provides long-term sealing and eliminates common issues like warping, oil leakage, and cracked housings. Its clean, anodized finish makes it the ideal choice for aggressive builds and custom engine bay setups. PLEASE NOTE: This is not a direct replacement for the factory cover. This billet cover bypasses the factory PCV system and is designed to be used with a catch can setup for excess crankcase pressure, featuring two -10 ORB ports for easy installation. (Catch can and plumbing not included)

Show More Show Less

VTT S58 Cylinder Head Port Check Valve Kit - S58 3.0L

T#:49822559

Part#: VTTS58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT S58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

Vargas Billet Oil Drain Fitting Adapter - -10AN - BMW S58

T#:52094565

Part#: VTT-FAB-040-AN-S

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT-FAB-040 S58 AN Male flange is a precision-engineered solution designed specifically for the BMW S58 engine platform.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW F97 X3 M S58 3.0L

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results