MAHLE Forged Piston Kit 92.50mm with Thermal Barrier Coating (TBC) - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2928985

Part#: 197843342T

Special Order: No Guaranteed ETA

$ 1,673.99 USD

Add to Wish List

Qty

$ 1,673.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Schrick Camshaft - E24 633/635, E28 533/535 E34 535i - 284-deg ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338214

Part#: 002201840-04

Back Ordered

Starting at $ 1,659.87 USD

Add to Wish List

Starting at $ 1,659.87 USD

Add to Wish List

German-made Original Schrick performance camshaft for M30 engines in 1984-up E24 635CSi, E28 533i/535i / 535is, and the E34 535i. This camshaft has a bit more duration and higher lift than the stock cam for improved top-end performance.

Cam Specs

Cam Lift (Valve Lift) I/E (mm)	Duration CRA Intake/Exhaust Peak Timing	Valve Timing CRA IO-IC-EO-EC	Valve lift at TDC I / E (mm)	Valve clearance I / E (mm)	Recommended valve springs
8.7/8.6 (10.9/10.8)	284/280/110	32-72 70-30	1.9 / 1.7	0.25 / 0.25	1982-1984: 000202090 1985-1993: 005602022 (inner) 005602062 (outer)

Schrick Technical Information / Specs

Note: this camshaft is designed to work on the "bolt-on" style distributor rotor. Some cars produced before 1985 with the "slide-on" style rotor require adaptor #11311288027.

Applications:
1984-1989 E24 633CSi, 635CSi
1984-1988 E28 533i 535i, 535is
1989-1993 E34 535i

Show More Show Less

BMW N55B30 JE Pistons

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33612902

Part#: 338097

Back Ordered

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.

Show More Show Less

JE Pistons BMW N55B30 84mm Bore 9.5:1 Compression Ratio -14.7 Dish FS...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590161

Part#: 338096

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons BMW N55B30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33612897

Part#: 3380966

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.

Show More Show Less

Cat Cams M52TU B28 Turbo Conversion Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25838979

Part#: 1304402

Special Order: No Guaranteed ETA

$ 1,642.99 USD

Add to Wish List

Qty

$ 1,642.99 USD

Add to Wish List

Cat Cams M52TU B28 Sport Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578586

Part#: 1304405

Special Order: No Guaranteed ETA

$ 1,642.99 USD

Add to Wish List

Qty

$ 1,642.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Cat Cams M52TU B28 Hot Street Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578587

Part#: 1304406

Special Order: No Guaranteed ETA

$ 1,642.99 USD

Add to Wish List

Qty

$ 1,642.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

N54 Manley Performance TurboTuff Connecting Rods

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26271778

Part#: 14448-6

In Stock at Vendor

$ 1,641.99 USD

Add to Wish List

Qty

$ 1,641.99 USD

Add to Wish List

Unlock the full potential of your BMW N54 engine with the Forged TurboTuff Connecting Rod Set from Manley Performance. Crafted with precision and expertise, these connecting rods are designed to deliver unparalleled performance and durability. Renowned for their lightweight yet robust construction, they undergo rigorous manufacturing processes to ensure exceptional quality. Each set is meticulously weight-matched for optimal balance, providing enhanced engine efficiency and reliability. Elevate your BMW N54 engine to new heights with the Manley Performance TurboTuff Connecting Rod Set.

Show More Show Less

Cam Bearing Ledge Replacement Kit - BMW N54 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23748158

Part#: 11127531224TKT

In Stock

$ 1,639.11 USD

Add to Wish List

Qty

$ 1,639.11 USD

Add to Wish List

Have your camshaft bearing ledges seen better days? This kit includes everything needed to replace your cam bearing ledges with Genuine BMW and high-quality OEM components. Included in this kit: Intake Cam Bearing Ledge Exhaust Cam Bearing Ledge Valve Cover Gasket Timing Chain Tensioner Cylinder Head Hardware Assembly Lubricant BMW Engine Oil Hengst Oil Filter

Show More Show Less

Cam Bearing Ledge Replacement Kit - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640352

Part#: 11127531224KT2

In Stock

$ 1,639.11 USD

Add to Wish List

Qty

$ 1,639.11 USD

Add to Wish List

Over time the bearing ledges in your N54 can be damaged by contaminated oil or a malfunctioning VANOS which can cause grooves to form in the bearing ledges. This kit contains everything necessary to replace these as well as important hardware.

Show More Show Less

BMW E6X / E8X / E9X / Z4 Cam Bearing Ledge Replacement Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21703017

Part#: N54CAMBRINGKT

In Stock

$ 1,639.11 USD

Add to Wish List

Qty

$ 1,639.11 USD

Add to Wish List

Maintaining your BMW E6X, E8X, E9X, or Z4 engine health is paramount to ensure optimal performance and longevity. Two crucial components that require periodic attention are the cam bearing ledge and valve cover gasket. Regular servicing of these components, along with other critical elements such as the camshaft O-ring, chain tensioner (with gasket), and oil filter, is imperative to keep your BMW running smoothly. Included in Kit: 1 - Cam Bearing Ledge - Exhaust 29 - Torx Bolt 1 - Genuine Cam Bearing Ledge - Intake 1 - Genuine Cam Bearing Ledge - Exhaust 1 - Valve Cover Gasket 4 - Genuine Camshaft O-rings 7 - Genuine BMW TwinPower Turbo 5W-30 Engine Oil 1 - Assembly Lube 1 - Chain Tensioner - With Gasket Ring 1 - Hengst Oil Filter 2 - Collar Screws Cam Bearing Ledge: The cam bearing ledge is vital for proper camshaft support and lubrication. Over time, wear and tear can compromise its effectiveness, potentially leading to camshaft damage. Servicing this component ensures that your camshaft operates optimally, preventing costly repairs. Valve Cover Gasket: A well-maintained valve cover gasket is essential to prevent oil leaks and maintain proper sealing in the engine. Ignoring gasket issues can lead to oil contamination, loss of engine performance, and even engine damage. Camshaft O-Ring: The camshaft O-ring helps maintain proper oil pressure and prevents oil leakage. A deteriorated O-ring can result in oil seepage, leading to lubrication issues that affect engine performance and longevity. Chain Tensioner (with Gasket Ring): Proper timing chain tension is crucial for engine synchronization. Servicing the chain tensioner and its gasket ensures correct timing, preventing potential engine misfires and damage. Oil Filter: Regularly replacing the oil filter is fundamental to maintaining clean engine oil. Clean oil is essential for lubrication and heat dissipation, safeguarding the engine against wear and tear. Kit is for these BMW models: E60 / E61 - N54 3.0L E82 / E88 - N54 3.0L E90 / E92 / E93 - N54 3.0L Z4 - N54 3.0L

Show More Show Less

AMC Cylinder Head - Bare - E34, E36, E39, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:383388

Part#: 11121703637

Ships on Aug 4, 2026

$ 1,631.99 USD

Add to Wish List

Qty

$ 1,631.99 USD

Add to Wish List

Bare head with guides and seats only

BMW S52/M52 6 Cyl. 256-Degree - Exhaust Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637317

Part#: 0261A1561-02

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M52 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 256 Duration Exhaust @ 1mm - 227 Exhaust Peak Timing - Cam Lobe Lift Exhaust - Valve Lift w/o Valve Clearance Exhaust - Valve Clearance Exhaust -

Show More Show Less

BMW S14 4 Zyl. 4 Vent.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599280

Part#: 0227D1200-02

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 320 Duration Intake @ 1mm - Duration Exhaust - 320 Duration Exhaust @ 1mm - Intake Peak Timing - 102 Exhaust Peak Timing - 102 Cam Lobe Lift Intake - 13 Cam Lobe Lift Exhaust - 13 Valve Lift w/o Valve Clearance Intake - 13 Valve Lift w/o Valve Clearance Exhaust - 13 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW S14 4 Zyl. 4 Vent.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26638235

Part#: 0227D1080-01

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 308 Duration Intake @ 1mm - 277 Duration Exhaust - 308 Duration Exhaust @ 1mm - 277 Intake Peak Timing - 102 Exhaust Peak Timing - 102 Cam Lobe Lift Intake - 12, 2 Cam Lobe Lift Exhaust - 12, 2 Valve Lift w/o Valve Clearance Intake - 12, 2 Valve Lift w/o Valve Clearance Exhaust - 12, 2 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

SP Connecting Rod Set, BMW M60 / M62

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37149883

Part#: SP-CRS-M60

Ships in 3 Business Days

$ 1,599.99 USD

Add to Wish List

Qty

$ 1,599.99 USD

Add to Wish List

Connecting rods for the BMW M60B30, M60B40, M62B35, M62B44, and M62B46 engines with a 143 mm length

Xtreme Duty Cylinder Sleeve Set - BMW S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34181271

Part#: 5150-CS-S65

Ships in 3 Business Days

$ 1,599.99 USD

Add to Wish List

Qty

$ 1,599.99 USD

Add to Wish List

BMW E28 / E30 / E43 - M20 Complete Cylinder Head Basic Replacement Ki...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2810081

Part#: 11121707032-3KT

Ships in 9 Business Days

Sale - Save 1% $ 1,614.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,598.57 USD

Add to Wish List

Qty

Sale - Save 1%

$ 1,614.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,598.57 USD

Add to Wish List

Includes all of the necessary components to service and replace the head on your M20 powered BMW

BMW S50/S52 6 Cyl. 284-Degree - Exhaust Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589751

Part#: 0284A1840-0V2

Special Order: No Guaranteed ETA

$ 1,596.99 USD

Add to Wish List

Qty

$ 1,596.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 284 Duration Exhaust @ 1mm - 253 Exhaust Peak Timing - 114-76 Cam Lobe Lift Exhaust - 11, 9 Valve Lift w/o Valve Clearance Exhaust - 11, 9 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW S50/S52 6 Cyl. 284-Degree - Intake Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589750

Part#: 0284E1840-0V2

Special Order: No Guaranteed ETA

$ 1,596.99 USD

Add to Wish List

Qty

$ 1,596.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 129 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0, 25

Show More Show Less

Complete Cylinder Head Basic Replacement Kit M20 2.5L / 2.7L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22822554

Part#: E30HEADRPLCKT

Ships in 9 Business Days

Sale - Save 1% $ 1,607.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,590.95 USD

Add to Wish List

Qty

Sale - Save 1%

$ 1,607.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,590.95 USD

Add to Wish List

Upgrade your BMW M20 2.5L and 2.7L engine with our Complete Cylinder Head Basic Replacement Kit . This kit includes the following essential components:

Cylinder Head Washer
BMW Coolant / Antifreeze - 1 gallon
Copper Exhaust Lock Nut
Oil Filter
Cylinder Head Bolt Set
Engine Oil Drain Plug Washer
Dielectric Spark Plug Boot Protector
BMW TwinPower Turbo 5W-30 Engine Oil
Cylinder Head Gasket
Assembly Lube - 4 oz
Engine Oil Drain Plug
M20 Cylinder Head - complete

Ensure a seamless and efficient replacement process for optimal performance.

Show More Show Less

JE Piston BMW N54B30 3.0T 85MM 9.5:1 KIT

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33612912

Part#: 361360

Back Ordered

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

N54B30 3.0T 85MM 9.5:1 JE Pistons for the N54 engine are built for high performance, utilizing forged aluminum for maximum strength and reliability under high boost conditions. Designed specifically for BMW’s twin-turbo 3.0L inline-six, these pistons offer optimized combustion efficiency with precision-engineered domes and valve reliefs. Their lightweight design reduces engine stress, enhancing throttle response and power output. With customizable compression ratios and coatings, JE Pistons are perfect for tuning and high-performance applications, offering durability and performance for both street and track use.

Show More Show Less

BMW M30 6 Cyl. 282-Degree - Monotronik- Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Equipped With Bosch Monotronik Only

T#:26638228

Part#: 002201820-01

Special Order: No Guaranteed ETA

$ 1,567.99 USD

Add to Wish List

Qty

$ 1,567.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 282 Duration Intake @ 1mm - Duration Exhaust - 282 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 4 Cam Lobe Lift Exhaust - 8, 4 Valve Lift w/o Valve Clearance Intake - 10, 6 Valve Lift w/o Valve Clearance Exhaust - 10, 6 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M30 6 Cyl. 282-Degree - Distributor - Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Equipped With a Distributor Only

T#:400550

Part#: 002201820-00

Special Order: No Guaranteed ETA

$ 1,567.99 USD

Add to Wish List

Qty

$ 1,567.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 282 Duration Intake @ 1mm - Duration Exhaust - 282 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 4 Cam Lobe Lift Exhaust - 8, 4 Valve Lift w/o Valve Clearance Intake - 10, 6 Valve Lift w/o Valve Clearance Exhaust - 10, 6 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

AMC Cylinder Head - complete - E39, E46, E53, E60, E61, E83, Z3, Z4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:383390

Part#: 11127514540-3

Ships on Aug 4, 2026

$ 1,562.99 USD

Add to Wish List

Qty

$ 1,562.99 USD

Add to Wish List

Complete cylinder head with guides, seats, valves, springs, and all neccesary hardware for installation

S65 WPC Performance Rod Bearing Replacement Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Stronger & smoother, with less friction!

T#:5498491

Part#: S65WPCKT

In Stock

Sale - Save 1% $ 1,583.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,562.25 USD

Add to Wish List

Qty

Sale - Save 1%

$ 1,583.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,562.25 USD

Add to Wish List

The S65 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service! Kit includes Upper and lower WPC Treated Genuine BMW Rod Bearings Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket RedLine assembly lube

Show More Show Less

Crankshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38924612

Part#: 11217580483

Special Order: No Guaranteed ETA

Sale - Save 3% $ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Direct replacement N55 crankshaft for a fraction of the cost of Genuine

Cat Cams M52B28 Sport Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805789

Part#: 1304211

Special Order: No Guaranteed ETA

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

Upgrade your M52B28 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Sport cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the valve timing: M52 /B28: from 115° to 90° (exhaust: 105° fix) The data are shown for full intake retard (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! Duration Intake @ .1mm: 240° Exhaust @ .1mm: 240° Intake @ 1mm: 203° Exhaust @ 1mm: 203° Lift Intake: 9.25mm Exhaust: 9.25mm Lobe Angle Intake: 110° Exhaust: 105°

Show More Show Less

T#:431

Part#: TMS431

Special Order: No Guaranteed ETA

$ 1,503.99 USD

Add to Wish List

Qty

$ 1,503.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 253 Duration Exhaust - 284 Duration Exhaust @ 1mm - 253 Intake Peak Timing - 106 Exhaust Peak Timing - 106 Cam Lobe Lift Intake - 11, 5 Cam Lobe Lift Exhaust - 11, 5 Valve Lift w/o Valve Clearance Intake - 11, 5 Valve Lift w/o Valve Clearance Exhaust - 11, 5 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

Schrick Camshaft - E30 M3 276 degree

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:203

Part#: TMS203

Special Order: No Guaranteed ETA

$ 1,503.99 USD

Add to Wish List

Qty

$ 1,503.99 USD

Add to Wish List

276-deg Performance Camshaft. This is the next step above the Evo 2/3 cams that we also sell and will produce greater top-end power with only slight loss in torque. This cam can be used on the intake side with a stock exhaust cam OR it can be used on the exhaust side with the 284-deg Schrick cam as the intake.

BMW Schrick Technical Specs

Schrick Technical Information / Specs br>
This item fits the following BMWs:
1988-1991 E30 BMW M3 - S14 engine

Show More Show Less

CP Carrillo Forged Piston Set - 82mm Bore, 10.25:1 Compression Ratio ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22525976

Part#: CP-FPS-B58-82- 1

Ships on Jul 28, 2026

$ 1,499.99 USD

Add to Wish List

Qty

$ 1,499.99 USD

Add to Wish List

Please note that professional installation is mandatory, and all purchases are considered final and non-refundable. CP-Carrillo excels in crafting high-performance pistons that are the backbone of true racing engines. Our engineering team, driven by experience, analysis, and innovation, ensures our pistons outperform the competition. Specifics: Designed for Gen1 B58 BMW engines Sold in balanced sets of six 82mm bore and 10.25:1 compression ratio Lightweight, robust, and precise Includes high-quality ring set, pins, and locks While our pistons guarantee excellence, engine builders must verify piston-to-valve clearance and camshaft timing for each build. Upgrade your racing engine with CP-Carrillo's forged pistons, where precision meets performance.

Show More Show Less

Schrick Camshaft - E30 325i, E34 525 (M20) 304 degree

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338233

Part#: 05601040-00

Ships on Oct 28, 2026

Starting at $ 1,489.99 USD

Add to Wish List

Starting at $ 1,489.99 USD

Add to Wish List

Schrick's most aggressive cam for the M20 engine. The 304-degree will make big power at the top but there will be a loss of low-end torque so this cam is only recommended for cars that see most of their time above 4000 rpm. Schrick High Performance valve springs are strongly recommended. This cam has a 12.2mm lift and will not clear stock M20 pistons.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft - E30 325i, E34 525 (M20) 304 Degree & Valve Springs...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:343814

Part#: 05601040-00KT

Ships on Oct 28, 2026

$ 1,489.99 USD

Add to Wish List

Qty

$ 1,489.99 USD

Add to Wish List

BMW US S50 6 Cyl. 284-Degree - Intake Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554296

Part#: 0284E1840-0V1

In Stock

Sale - Save 15% $ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 122 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0,25

Show More Show Less

Carrillo Forged Connecting Rod Set - N12/N14/N16/N18 1.6L BM_BR56_OHS...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23416546

Part#: BM_BR56_OHS_5454

In Stock at Vendor

$ 1,459.99 USD

Add to Wish List

Qty

$ 1,459.99 USD

Add to Wish List

Explore the legacy of excellence with Carrillo Connecting Rods. Founded by Fred Carrillo in 1963, Carrillo represents an unwavering commitment to top-notch manufacturing. Fred's dedication to speed and quality remains integral to Carrillo's identity since its inception.

At CP-Carrillo, crafting each rod transcends traditional manufacturing. It's an artistic collaboration of expertise. Skilled specialists—material experts, forging precisionists, production craftsmen, design engineers, and engine specialists—contribute their skills, meticulously crafting each rod with precision.

CP-Carrillo's pursuit of perfection is reflected in their continuous refinement of connecting rod designs, aspiring towards the ultimate goal—excellence in performance.

Show More Show Less

Rod Bearing Overhaul Kit - E9X M3 S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340426

Part#: TMS222795

Ships in 2 Business Days

$ 1,530.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 1,456.40 USD

Add to Wish List

Starting at $ 1,456.40 USD

Add to Wish List

Rod bearings should be replaced as a preventative measure before 80,000 miles. This package is the most complete rod bearing overhaul kit available and includes not just the latest BMW rod bearings and connecting rod bolts, but also everything else that should be replaced with the oil pan and front subframe off the car.

Show More Show Less

JE Pistons Forged Piston Set - 84mm - 10.5:1 - M52

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11857228

Part#: JE-FPS-M52-84-10

Ships on Jul 28, 2026

$ 1,439.99 USD

Add to Wish List

Qty

$ 1,439.99 USD

Add to Wish List

Boost Your BMW's Engine with JE Pistons

Upgrade your BMW's engine with the JE Pistons Forged Piston Set designed for the M52 engine. These high-quality forged pistons feature a diameter of 84mm and a compression ratio of 10.5:1, ensuring improved performance and reliability for your BMW.

Enhances engine performance and reliability
Precision-engineered for optimal fit and function
High-quality forged construction ensures durability
Designed specifically for the M52 engine

Show More Show Less

VAC Motorsports Flanged Cylinder Sleeves, BMW M60

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:36235571

Part#: VAC-FCS-M60-90-G

Ships on Jul 28, 2026

$ 1,439.99 USD

Add to Wish List

Qty

$ 1,439.99 USD

Add to Wish List

CP-CARRILLO Connecting Rod Set - CARR Rod Bolts - BMW E30 M3 S14 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:10128444

Part#: CAR-CRS-S14-CARR

Ships on Jul 28, 2026

$ 1,439.99 USD

Add to Wish List

Qty

$ 1,439.99 USD

Add to Wish List

Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on. Quality and pride go hand-in-hand at Carrillo Industries. Manufacturing a Carrillo rod is much more than cutting and forging, meeting production goals and shipping deadlines. Every Carrillo rod is made with the goal of winning in mind and the Carrillo rods are a proven performers in both street and racing S14 engines. Carillo's fasteners and "Carrilloy" rods has proven popular with all racers who want the best. Special Chrome-Moly based alloy Forged Rods Lightweight Design for low mass Vs. Stock Strong and proven in racing Excellent quality control Tight tolerances and balancing Includes High Quality Non-stretch CARR Rod Bolts Tech Notes: WMC Bolts are the standard hardware included and are an excellent fastener. For extreme output applications and all-out racing, the CARR bolt option holds maximum RPMs and HP levels.

Show More Show Less

VAC Motorsports Flanged Cylinder Sleeves - S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27705424

Part#: VAC-FCS-S65-G1

Ships on Jul 28, 2026

$ 1,439.99 USD

Add to Wish List

Qty

$ 1,439.99 USD

Add to Wish List

VAC Motorsports Flanged Cylinder Sleeves - S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27705422

Part#: VAC-FCS-S65-G2

Ships on Jul 28, 2026

$ 1,439.99 USD

Add to Wish List

Qty

$ 1,439.99 USD

Add to Wish List

MAHLE PowerPak Piston Kit with Thermal Barrier Coating (TBC) - 82mm -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2929002

Part#: 197883929T

Special Order: No Guaranteed ETA

$ 1,435.99 USD

Add to Wish List

Qty

$ 1,435.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your B58 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 92.50mm - S65 - 4.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2928989

Part#: 197843642

Ships in 2 Business Days

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts

Sub-Categories

Boost Your BMW's Engine with JE Pistons

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results