Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.
One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.
Comprehensive Kit Includes:
Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Upgrade your Mini's engine with the Cylinder Head Gasket Asbestos-Free (0.90MM) N12 N16 1.6L Engine. This asbestos-free gasket is designed to replace a blown gasket or to accompany a performance head upgrade. Contoured to fit your Mini's engine block, this stock size gasket ensures proper alignment with all connecting routes for oil, coolant, and mechanical fastener holes when crushed under proper torque. Invest in this standard size gasket for reliable performance and engine integrity.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-07-2026
This comprehensive kit addresses the common issue of deteriorating valve cover gaskets in the S65 engine. Over time, heat exposure and engine oil can cause these gaskets to degrade, leading to leaks that result in smoke and unpleasant odors from burning oil.
Engineered for seamless integration and hassle-free operation, this kit streamlines the valve cover gasket replacement process, saving you valuable time and money.
Each component has been meticulously selected to ensure optimal durability and leak prevention. Whether you're a professional mechanic or a DIY enthusiast, rest assured that every part in this kit is of the highest quality and precision-engineered for peak performance.
|
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
04-03-2026
This product was last offered at the strikethrough price on
04-03-2026
This product was last offered at the strikethrough price on
07-01-2026
This product was last offered at the strikethrough price on
07-01-2026
This product was last offered at the strikethrough price on
04-12-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-26-2026
This product was last offered at the strikethrough price on
08-26-2026
Ensure your BMW's engine runs flawlessly with the Elring Eccentric Shaft Sensor Seal. This essential component provides a tight seal for the eccentric shaft sensor, effectively preventing oil leaks and maintaining accurate sensor readings. Designed for BMW owners who prioritize engine health and efficiency, this seal is a vital part of keeping your vehicle in top condition.
Key Features:
Exact Match: Crafted to fit precisely with your BMW's eccentric shaft sensor, ensuring a perfect and secure fit every time. Robust Materials: Constructed from premium, resilient materials that withstand wear, extreme temperatures, and chemical exposure for extended durability. Leak-Proof Seal: Expertly designed to prevent oil leaks, safeguarding your engine and ensuring it performs at its peak. Sensor Accuracy: Maintains the integrity of the eccentric shaft sensor, ensuring accurate readings for precise engine timing and optimal performance. OEM Standard: Meets or exceeds OEM specifications, providing reliable and consistent performance. Simple Installation: Engineered for easy installation, allowing for quick replacement with minimal effort, whether by a professional or a DIY enthusiast. Engine Longevity: Protects your engine from oil contamination and potential damage, contributing to the smooth and long-lasting operation of your vehicle. Choose the Elring Eccentric Shaft Sensor Seal to uphold the quality and precision of your BMW's engine. Trust in Elring's expertise to replace your worn-out seal with a high-quality component designed to keep your engine running smoothly and efficiently.
This product was last offered at the strikethrough price on
05-07-2026
Upgrade your MINI's cylinder head gasket with this stock size replacement, ideal for addressing blown gaskets or upgrading to a performance head. Designed to contour perfectly to your MINI's engine block, this flat gasket ensures proper alignment with all connecting routes for oil, coolant, and mechanical faster holes when properly torqued. Ensure reliable sealing and optimal performance with this quality replacement cylinder head gasket.
This product was last offered at the strikethrough price on
04-17-2026
This top-end gasket set covers the cylinder head on the S54 engine used in the E46 M3, Z3 M Roadster/M Coupe, and E85/E86 Z4 M Roadster, M Coupe. If you're pulling the head, intake manifold, or doing any other upper end engine work this set can be a time and money saver. This set includes all of the commonly replaced gaskets, seals, and o-rings when overhauling the head. It's also a useful kit to have and dip into any time you're doing upper end engine work. Not having a critical seal or gasket on hand can ruin your work and this gasket set can prevent that from happening. This Victor Reinz set includes the head gasket.
BMW #QtyDescription
071199035461left timing rail upper bolt seal
071199630724VAN0S oil line seal ring
071199631292crankcase vent banjo bolt seals
071199632522screw plug seal ring
071199633421right upper timing rail bolt seal ring
071199634181timing chain tensioner seal ring
111214373952valve cover stud grommet seal
1112783097213valve cover stud grommet seal
111278312716spark plug hole profile gasket
111278320341main valve cover gasket
111278370241oil fill cap seal ring
111278370251crankcaske oil separator seal ring
111417367581VAN0S-camshaft plate o-ring
111578309661crankcase oil separator o-ring, large
111578321191crankcase oil separator plug o-ring
113113173181inside o-ring for internal VAN0S regulating valve
113490644572valve stem seal, 2 sets = 24 valves
113678319381VAN0S unit profile gasket
114113060821outside o-ring for internal VAN0S regulating valve
115313184021thermostat-to-water pump o-ring
115378307083coolant pipe o-ring gasket
115378307092thermostat housing connector o-ring
116114076951intake bellows o-ring profile gasket
116178301041intake bellows-to-airbox gasket
116278306676exhaust manifold port gasket
117275052591air pump valve profile gasket
121417483982camshaft position sensor o-ring
135478314836throttle body o-ring
136414374746fuel injector o-ring, upper
136478306116fuel injector o-ring, lower
111278359181head gasket
This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster Z4 M Coupe
This product was last offered at the strikethrough price on
08-13-2026
This product was last offered at the strikethrough price on
04-08-2026
This set of top-end gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when pulling the cylinder head for overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With the head off the car you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because the newer BMW models have very strict emissions controls and vacuum and oil leaks can create turmoil in the system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.
This item fits the following BMWs:
2003-2006 E46 BMW 325i 325ci 325xi 330i 330ci 330xi
9/2002-on E39 BMW 525i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2003-2006 E53 BMW X5 3.0i
9/2002-on Z3 BMW Z3 2.5i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
04-26-2026
At higher miles and over many years, the gaskets and seals in you BMW tend to shrink, crack, split, or become brittle. This can lead to oil, compression, or coolant loss. To maintain the performance of your engine and ensure there are no leaks, replace all of the gaskets with this cylinder head gasket kit that includes every gasket and seal you will need to replace or reseal your cylinder head.
Fits the following BMW chassis
E24 E32 E34
Fits the following engines:
M30 3.4L
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
08-13-2026
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
06-30-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-07-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
08-26-2026
Replacement Head Gasket Set Fits E36 318i 318is 318ic 1996-1998 with M44 engine, and Z3 1.9 1996-1998. Includes all the gaskets and seals needed when rebuilding the cylinder head. Includes head gasket.
This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.
Complete Parts List
(click to expand)
BMW p/nQtyDescription
071199631302screw plug gasket ring
071199633551timing rail screw plug o-ring
111212479481gasket
111214339501head gasket
111217214751spark plug hole / valve cover screw
profile gasket
111217214763spark plug hole profile gasket
111217218761main valve cover gasket
1112172187915valve cover screw seal
111412478371profile gasket between
outer upper and lower timing covers
111412478491profile gasket between
inner upper and lower timing covers
111417430651upper timing cover profile gaskets
113490654382valve stem seals
2 sets = 16 valves
115117396911o-ring
115317431791thermostat housing o-ring
116112474782upper and lower intake plenum profile gasket
116117346841lower intake plenum profile gasket
116214353662exhaust manifold gasket plate
117214353671gasket
117275052591gasket
121417483981camshaft position sensor o-ring
135317202511fuel pressure regulator o-ring, large
135317202521fuel pressure regulator o-ring, small
135417398091throttle body o-ring profile gasket
136417307674fuel injector o-ring
136417433774fuel injector o-ring
183017119691exhaust manifold flange gasket
This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ic 318ti
1996-1998 Z3 BMW Z3 1.9
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
08-26-2026