ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

T#:3606

Part#: 201-4302

In Stock

19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Qty

19% off MSRP

$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

ARP S54 Head Stud Kit (E46M3 / MZ3 / MZ4)

T#:3631

Part#: 201-4303

In Stock

$ 247.99 USD

Add to Wish List

Qty

$ 247.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs, particularly on the S54 3.2 liter engine. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best S54 head studs we've found for the E46 M3 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)
2006-2008 MZ4 Z4 M Roadster & M Coupe

Show More Show Less

BMW M20 Engine ARP Head Stud Kit - E30 325i, E34 525i

T#:189783

Part#: 201-4305

In Stock

$ 271.99

This product was last offered at the strikethrough price on
07-10-2026

$ 271.18 USD

Add to Wish List

Qty

$ 271.18 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1985-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

OEM Head Bolt Set - M50 M52 S50 S52

T#:1551

Part#: 11121721938

In Stock

Sale - Save 66% $ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD

Add to Wish List

Qty

Sale - Save 66%

$ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD

Add to Wish List

Head Bolt Set for all M50 engines with a steel engine block.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1998-2000 Z3 BMW M Roadster M Roadster

Show More Show Less

Supertech Valve Spring Kit - BMW S65 Engine

T#:4908057

Part#: ST-VSK-S65

Ships in 8 Business Days

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

Revitalize your BMW S65 engine's performance with Supertech Beehive Valve Springs – a reliable solution to the common issue of valve spring breakage. Designed as an economical yet high-quality alternative, these valve springs are the perfect complement to Stage 1 and Stage 2 cylinder heads.

Enhanced Durability: Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy.
High-Performance Design: Withstands high rpms for improved engine performance.
Better Memory: Ensures consistent performance under extreme conditions.
Precision Engineering: Computer-designed to manage wire stress levels and harmonics.
Complementary Upgrade: Ideal for use with Stage 1 and Stage 2 cylinder heads.

Upgrade your BMW S65 engine with Supertech Beehive Valve Springs for reliable and durable performance.

Show More Show Less

ARP Head Stud Kit - N54

T#:24112781

Part#: ARP-HSK-N54-S

Back Ordered

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

BMW S14 Engine ARP Head Stud Kit - E30 M3

T#:189786

Part#: 201-4605

In Stock at Vendor

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

Victor Reinz Cylinder Head Bolt Set - BMW N63 S63

T#:27672116

Part#: 11127582454

In Stock at Vendor

$ 55.99

This product was last offered at the strikethrough price on
05-07-2026

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

ARP Cylinder Head Stud Kit - M30 BMW 3.0L 3.4L

T#:379415

Part#: 201-4602

In Stock at Vendor

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

This item fits the following BMW Engines:
M30 3.0L 3.4L I6

Show More Show Less

ARP Cylinder Head Stud Kit - E9X M3 S65

T#:554124

Part#: 201-4307

Ships in 9 Business Days

$ 363.99 USD

Add to Wish List

Qty

$ 363.99 USD

Add to Wish List

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Show More Show Less

ARP ARP2000 Head Stud Kit - N55

T#:42335661

Part#: ARP-HSK-N55-S

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!

M52TU/M54 Aluminum Block Head Bolt Set

T#:1560

Part#: 11121740065

In Stock at Vendor

$ 80.99

This product was last offered at the strikethrough price on
05-07-2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Head Bolt set for M52TU and M54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

ARP Cylinder Head Stud Kit - ARP2000 - BMW B58 3.0L

T#:1105898

Part#: 201-4701

In Stock at Vendor

20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

Qty

20% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

ARP Main Stud Kit for BMW/MINI 1.6 N12/N14/N16/N18 Engine

T#:189787

Part#: 201-5401

In Stock at Vendor

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

This ARP main stud set for the new MINI F engines eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each main stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This main stud kit includes hardened parallel-ground washers and aerospace quality nuts.

The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the MINI, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

Show More Show Less

Head Bolt Set - S54 - E46 M3, MZ3 S54, Z4 M

T#:25748

Part#: 11127831862

In Stock at Vendor

$ 51.98 USD

Add to Wish List

Qty

$ 51.98 USD

Add to Wish List

Head Bolt Set for the S54 engine.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

MINI 1.6 N12/N14/N16/N18 Engine ARP Head Stud Kit

T#:189781

Part#: 201-4304

In Stock

$ 227.99 USD

Add to Wish List

Qty

$ 227.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW/MINI head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

Show More Show Less

ARP Head Stud Kit B48 Undercut CA625+, 12pt

T#:48367044

Part#: 401-4704

In Stock

$ 588.99

This product was last offered at the strikethrough price on
06-08-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 588.99

This product was last offered at the strikethrough price on
06-08-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

MINI 1.6 W10/W11 Engine ARP Head Stud Kit

T#:212677

Part#: 201-4301

In Stock

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW/MINI head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following MINIs:
2002-2006 R50 MINI MINI Cooper
2002-2006 R53 MINI MINI Cooper S

Show More Show Less

MINI R56 Cylinder Head Bolts - Set Of 13

T#:583709

Part#: 11127560274

Ships in 9 Business Days

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

ARP Head Stud Kit - N63

T#:26238387

Part#: ARP-HSK-N63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

Upgrade the performance of your BMW N63 engine with our ARP Head Stud Kits, specifically designed for the turbocharged V-8 N63 engine. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their N63 builds.

Show More Show Less

MINI N14 N18 Valve Stem Seal Kit - Set Of 16

T#:591738

Part#: 11340033950

Ships in 3 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

MINI N14 N18 Valve Stem Seal Kit - Set Of 16 is an essential upgrade for maintaining the performance and longevity of your Mini's engine. This comprehensive kit, designed specifically for the MINI N14 and N18 engines, includes 16 high-quality valve stem seals that ensure optimal sealing and efficient engine performance.

Complete set of 16 valve stem seals for comprehensive coverage.
Designed specifically for MINI N14 and N18 engines for perfect compatibility.
High-quality materials for long-lasting durability and reliable performance.
Prevents oil leakage and reduces engine wear.
Enhances engine efficiency and extends engine life.

Ensure your Mini's engine operates at peak performance with the MINI N14 N18 Valve Stem Seal Kit - Set Of 16.

Show More Show Less

Cynlider Head Gasket

T#:13957889

Part#: 11121734214

In Stock at Vendor

$ 126.09 USD

Add to Wish List

Qty

$ 126.09 USD

Add to Wish List

Victor Reinz Cylinder Head Bolts - N54

T#:373825

Part#: 11127574303

In Stock at Vendor

$ 152.99

This product was last offered at the strikethrough price on
04-15-2026

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Head Bolt set for the N54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Show More Show Less

Head Bolt Set - E30 E36 M42 M44 318i 318is, Z3 1.9

T#:19403

Part#: 11121721939

Ships in 4 Business Days

$ 54.58 USD

Add to Wish List

Qty

$ 54.58 USD

Add to Wish List

Replacing a head gasket? The M42 /M44 engine cylinder head bolts stretch when installed and as a result cannot be re-used. Replace you head bolts with this set of 10 head bolts.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1998 Z3 BMW Z3 1.9

Show More Show Less

HEAD STUD KIT - BMW S85

T#:20089537

Part#: ARP-HSK-S85

Ships in 6 Business Days

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW S63 4.4L

T#:51110152

Part#: 201-4703

Ships in 9 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

BMW M10 Engine ARP Head Stud Kit - 2002, E21 320i, E30 318i

T#:189784

Part#: 201-4601

Ships in 9 Business Days

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i

Show More Show Less

ARP Connecting Rod Bolt Kit - M10 1.8L

T#:554123

Part#: 201-6304

Ships on Aug 6, 2026

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMW Engines:
M10 1.8L

Show More Show Less

Supertech BMW M50/M52/S50/S52 Dual Valve Spring Kit

T#:9126166

Part#: PRK-H1000D-BM

Ships on Aug 6, 2026

$ 763.99 USD

Add to Wish List

Qty

$ 763.99 USD

Add to Wish List

5mm Single groove valve lock conversion

T#:30330952

Part#: KPR-5.0/7S

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Canyon Engine Standard Valve Guide - E23, E24, E28

T#:376784

Part#: 11121263642

In Stock at Vendor

$ 6.73

This product was last offered at the strikethrough price on
07-15-2026

$ 6.17 USD

Add to Wish List

Qty

$ 6.17 USD

Add to Wish List

Frequent cause of oil consumption in high-mileage engines

Pro Series Head Bolts W10 W11 1.6L Engine

T#:26404879

Part#: 206-3601

Ships in 3 Business Days

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

Enhance the performance of your Mini with ARP's Pro series cylinder head bolts. These bolts are cold-forged for maximum molecular integrity and heat-treated to withstand extreme pressure, rated at 190,000 psi. Featuring 12-point heads, each kit includes hardened parallel washers for precise torque readings and even load distribution.

Cold-forged for maximum molecular integrity
Heat-treated to withstand extreme pressure
Rated at 190,000 psi for exceptional strength
12-point heads for easy installation
Includes hardened parallel washers for precise torque readings

Show More Show Less

ARP Head Stud Kit - S63

T#:26238368

Part#: ARP-HSK-S63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

With 5150's ARP head stud kit, you can securely tune up the boost on your BMW S63 engine without worrying about the cylinder heads lifting. Specifically designed for the turbocharged V-8 S63 engines found in high-performance models such as F10 M5, F90 M5, F12 M6, F95 X5M, F96 X6M and F13 M6. 201-4702, 201-4703. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their S63 builds. ARP S63 Head Stud Kit for: M5 F10 2011-2016 M5 F90 2017 M6 F13 2011-2018 X5M F95 2013-2018 X6M F96 2014-2019 ARP2000 Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 90 ft-lbs. Custom Age 625+ Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 110 ft-lbs.

Show More Show Less

ARP Head Stud Kit, BMW S14

T#:28537451

Part#: ARP-HSK-S14

Ships in 4 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This ARP head stud Kit is designed for the BMW S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Installing ARP head studs can provide several benefits, including increased clamping force, improved head gasket sealing, and greater overall engine strength. This is especially important in high-performance and racing applications where the engine is subjected to increased stress and higher temperatures. Before installing ARP head studs, it is important to properly clean and prepare the engine block and cylinder head mating surfaces. It is also recommended to use ARP Ultra-Torque Fastener Assembly Lubricant during installation to ensure proper torque and clamping force. Instructions: 1. To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Chase if necessary with ARP Thread Chaser. 2. Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension. 3. If the cylinder head studs protrude into a water jacket, lubricate the block threads of the studs with ARP THREAD SEALER. 4. Screw studs into the block “HAND TIGHT ONLY”. 5. Install the cylinder head(s) and check for binding or misalignment. 6. Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight. ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to motor oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when motor oil or other low quality lubricants are used.

Show More Show Less

Canyon Engine Valve Guide - E10

T#:19505

Part#: 11121266760

In Stock at Vendor

$ 7.99

This product was last offered at the strikethrough price on
07-15-2026

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

VALVE GUIDE 11121266760 Manufactured by Canyon Engine

This item fits the following BMWs:
BMW 1600, 2002, 2002tii
BMW 3 Series - 318i, 320/6, 320i, 323i

--.

Show More Show Less

ARP Head Stud Kit B48

T#:48367046

Part#: 201-4704

In Stock at Vendor

$ 263.99 USD

Add to Wish List

Qty

$ 263.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:47610654

Part#: 401-4701

In Stock at Vendor

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

Titanium Retainer - Priced Each

T#:26171670

Part#: RET-MC56/T1

In Stock

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Limited Qty Sale

Add to Wish List

Titanium Performance Retainers for MINI

Upgrade your MINI's performance with these titanium performance retainers, designed to sit at the top of the spring. Crafted from high-quality titanium metal, these retainers offer enhanced durability and strength compared to traditional options. Compatible with OEM springs or SPR-MC56-BE, these retainers are versatile and suitable for various engine setups. For a complete engine replacement, you'll need 16 of these performance retainers.

Benefits:

Enhances MINI's performance
Crafted from high-quality titanium metal
Offers enhanced durability and strength
Versatile compatibility with OEM springs or SPR-MC56-BE
Ideal for engine upgrades and replacements

Show More Show Less

Titanium Retainers - Set Of 8 - BMW B48 - Intake Side

T#:54388410

Part#: RET-BMB48-TI-8

Ships in 9 Business Days

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

By minimizing moving weight, these retainers help prevent valve float at extended RPM ranges, ensuring your engine maintains precise timing and peak power delivery under the most demanding track conditions.

Show More Show Less

MINI W10 W11 Performance Valve Springs Kit - Single Groove SPRK-HM100...

T#:29002074

Part#: SPRK-HM1007BE/MC

Ships in 9 Business Days

$ 768.99 USD

Add to Wish List

Qty

$ 768.99 USD

Add to Wish List

Upgrade Your Mini's Engine Performance with MINI W10 W11 Performance Valve Springs Kit - Single Groove SPRK-HM1007BE/MC2 SPR-HM1007BE/MC2

Enhance your Mini's engine performance with the MINI W10 W11 Performance Valve Springs Kit - Single Groove SPRK-HM1007BE/MC2 SPR-HM1007BE/MC2. This comprehensive kit is designed to optimize valve operation and improve engine efficiency. With high-quality materials and precision engineering, it ensures durability and reliability for your Mini's engine.

Benefits:

Optimizes valve operation for improved engine performance
High-quality materials ensure durability and reliability
Precision engineering for enhanced engine efficiency
Compatible with Mini W10 and W11 engines

Show More Show Less

SuperTech - Performance Dual Valve Spring Kit With Titanium Retainers...

T#:44699186

Part#: SPRK-H1005D-M20

Ships in 9 Business Days

$ 855.99 USD

Add to Wish List

Qty

$ 855.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - ARP2000 - BMW S58 3.0L

T#:51110148

Part#: 201-4705

In Stock at Vendor

20% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 373.99 USD

Add to Wish List

Qty

20% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 373.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

ARP2000 12PT HSK - S63

T#:54104152

Part#: 201-4702

Ships on Aug 6, 2026

20% off MSRP $ 639.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 511.99 USD

Add to Wish List

Qty

20% off MSRP

$ 639.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 511.99 USD

Add to Wish List

Developed specifically for high-boost, high-horsepower motorsport applications, the ARP Head Stud Kit provides the ultimate clamping force required to maintain a perfect head-to-block seal under the most grueling race conditions.

Show More Show Less