BMW Drilled & Slotted Brake Rotors

Upgrade your BMW's braking system with the BMW E70 R15 Rear Cross Drilled & Slotted Brake Rotors - Left. Engineered for superior performance and durability, these brake rotors enhance braking power and reduce brake fade. The cross-drilled and slotted design helps dissipate heat more effectively, ensuring consistent braking performance in various driving conditions. With easy installation and a perfect fit for BMW E70 models, these brake rotors are a must-have for any BMW enthusiast.

• Enhanced braking power
• Reduced brake fade
• Cross-drilled and slotted design for improved heat dissipation
• Easy installation and perfect fit for BMW E70 models

This is a Genuine BMW FRONT brake rotor/disc (370x30mm) for all F30, F31 F32 F33 and F34 models with either the BMW M Performance brakes or 335/435 with the optional M Sport brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade.

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 335/435 optional brakes (option code S2NH or S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey calipers. Note that only the 335 and 435 M Sport upgrade used 370mm rotors; the 328i/428i M Sport option used a 340mm rotor. See below for a breakdown of the exact exact models and packages these rotors will work on. And for more information on the brakes for the F30/F32 chassis, see our FAQ page.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NH/S2NHA M Sport brake option:
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible

This is a pair (2) of Genuine BMW FRONT brake rotors/discs (370x30mm) for all F30, F31 F32 F33 and F34 models with either the BMW M Performance brakes or 335/435 with the optional M Sport brakes upgrade. These rotors are dimpled and slotted to improve brake pad feel and give the brakes a sportier and more aggressive look. In addition, they are larger that the standard brake rotors to help in braking performance. These are not a direct replacement for the stock brakes and will only work with the M Performance or optional M Sport brake upgrade.

The M Performance brakes were a dealer-installed accessory that could have been ordered new or installed after the car was delivered. M Performance brakes were larger than stock and had a colored brake caliper (red, yellow, or orange). The M Sport 335/435 optional brakes (option code S2NH or S2NHA) were available as an additional option on top of the M Sport trim package but could also be ordered on their own. They featured the same size brakes as the M Performance accessory but with either blue or unfinished grey calipers. Note that only the 335 and 435 M Sport upgrade used 370mm rotors; the 328i/428i M Sport option used a 340mm rotor. See below for a breakdown of the exact exact models and packages these rotors will work on. And for more information on the brakes for the F30/F32 chassis, see our FAQ page.
 

F30 Brake FAQ Articles

F30 328i Brake Package Differences

F30 335i Brake Package Differences

Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs with the M Performance accessory upgrade:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NH/S2NHA M Sport brake option:
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible

Upgrade your braking with this limited-time Doorbuster package! Featuring ECS 2-Piece Front Brake Rotors and Exact-Fit Stainless Steel Brake Lines for the front of your BMW, this package reduces weight, improves brake cooling, enhances pad contact under heavy deceleration, and allows for better brake pedal feedback.

ECS 2-PIECE FRONT BRAKE ROTORS

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

ECS EXACT-FIT STAINLESS STEEL BRAKE LINES

ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.

If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.

ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

Upgrade your braking with this limited-time Doorbuster package! Featuring ECS 2-Piece Front Brake Rotors and Exact-Fit Stainless Steel Brake Lines for the front of your BMW, this package reduces weight, improves brake cooling, enhances pad contact under heavy deceleration, and allows for better brake pedal feedback.

ECS 2-PIECE FRONT BRAKE ROTORS

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

ECS EXACT-FIT STAINLESS STEEL BRAKE LINES

ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.

If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.

ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.