Find Parts That Fit Your Vehicle

Packaged by Turner BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:22196332
Part#: 11287636373TKT
Ships in 1-2 days
Sale - Save 5% $ 120.99

This product was last offered at the strikethrough price on
04-21-2026

$ 115.39 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 120.99

This product was last offered at the strikethrough price on
04-21-2026

$ 115.39 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, hydraulic tensioner, and two new pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Timing Chain Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777300
Part#: 11311435026-KT
In Stock
Sale - Save 20% $ 861.99

This product was last offered at the strikethrough price on
05-03-2026

$ 692.14 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 861.99

This product was last offered at the strikethrough price on
05-03-2026

$ 692.14 USD
Free Shipping on orders $49 and up
Timing chain guides are a main failure point in the otherwise bulletproof M62. Common symptoms of failure include excessive vibration or “slap” from the timing chain, and the possibility of plastic particles throughout the oil. Symptoms typically begin to surface between 80,000 and 100,000 miles. If left untouched, the issue can compound itself so far as to allow the timing chain to jump out of time, leaving you with a potentially damaged head and larger repair costs. This kit has been assembled using quality OE replacement components. From new timing chain guides to a replacement oil pan drain plug, this kit has you covered to assure that all the needed parts are on hand and ready to install. Kit includes: All required Gaskets and seals Camshaft timing chain tensioners with retaining clips Timing chain chain tensioner for crankshaft to camshaft with sealing washer Timing chain guide rails Water pump hose o-rings Fan shroud rivets Oil separator valve Timing chain – Crankshaft to camshafts without master link Cylinder head timing chains Replacement oil filter with associated o-ring. Dipstick O-ring Valve cover bolt seals Crankshaft bolt
Show More Show Less
Oil Pan Gasket replacement kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644328
Part#: 111375351060KT
In Stock
$ 210.87 USD
Free Shipping on orders $49 and up
A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years. This kit also includes the hardware for the oil pan that is a one time use item.

Fuel Pump Kit - E46
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56291046
Part#: 16142229684KT2
Ships in 1-2 days
New Item
$ 535.01 USD
Free Shipping on orders $49 and up
A tired fuel pump or a restricted fuel filter can cause dangerous lean spikes under full throttle putting your high strung M engine at risk. The BMW E46 M3 saddle tank relies heavily on both a primary pump and an auxiliary transfer pump to keep fuel moving efficiently across the tank arch during cornering.
Show More Show Less

Idle Control Valve Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744026
Part#: 11611437453-KT
In Stock
$ 173.13 USD
Free Shipping on orders $49 and up
Located in the intake system, this part is a common source of idle issues. This kit includes a new mount and idle control valve grommet
N54 Twin Turbo VTT Stock Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644248
Part#: 116575589220KT
Ships on Oct 27, 2026
Sale - Save 4% $ 1,912.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,829.14 USD
Sale - Save 4%
$ 1,912.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,829.14 USD

OEM Ignition Service Kit - E34 M30 3.4L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556694
Part#: E34M30TISKT2
Ships in 7 Business Days
$ 452.06 USD
Free Shipping
$ 452.06 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:51883703
Part#: 11122247447CKT
In Stock
New Item
Sale - Save 1% $ 515.64

This product was last offered at the strikethrough price on
05-03-2026

$ 508.80 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 515.64

This product was last offered at the strikethrough price on
05-03-2026

$ 508.80 USD
Free Shipping on orders $49 and up
As with many other BMW valve covers, replacing the M57 valve cover gasket requires numerous other parts to be removed before this gasket can be accessed. As you remove these parts, you expose other gaskets and components that can and should be replaced. This kit includes all of the gaskets, hardware, and a few other components we highly suggest replacing while completing the valve cover gasket replacement to prevent leaks and ensure your M57 continues running smoothly.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:29798955
Part#: 11288650740T2KT
In Stock
Sale - Save 19% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD
Free Shipping on orders $49 and up
Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: OEM Continental Accessory Belt OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware
Show More Show Less

Packaged by Turner - Corporate Logo
T#:27672133
Part#: 11238511371TKT5
Ships on Mar 2, 2027
$ 762.20 USD
Free Shipping on orders $49 and up
The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less
Packaged by Turner - Corporate Logo
T#:27672134
Part#: 11238511371TKT6
Ships on Mar 2, 2027
Sale - Save 1% $ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 573.54 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 573.54 USD
Free Shipping on orders $49 and up
The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less
Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...
10X Entries Into Our F80 M3 Sweepstakes
Upgrade Your Low-Pressure Fueling System With this All-Inclusive Kit!
Packaged by Turner - Corporate Logo
T#:25606665
Part#: N5XFUEL
Ships on Oct 14, 2026
Sale - Save 1% $ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,241.80 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,241.80 USD
Free Shipping on orders $49 and up
Introducing the comprehensive N54/N55 Low-Pressure Fueling Solution! With Radium Engineering's Regulated Fuel Hanger Surge Tank at its core, this kit allows you to tailor your fuel pump setup, select an in-line fuel filter, and opt for a wiring kit for multiple LPFP configurations in your N54 or N55-powered E9X 335i. In this setup, the BMW fuel pump serves as a "lift" pump, maintaining fuel volume in the Fuel Hanger Surge Tank via a dedicated orifice. This guarantees sufficient pressure for the venturi jet pump(s) to operate, ensuring consistent fuel delivery. Excess fuel in the FHST cycles back to the OEM tank through a one-way check valve ensuring a steady fuel supply. Unlike conventional surge tanks, which rely on pump flow matching, this FHST employs additional mechanisms to continuously deliver fuel regardless of fluctuations in other fuel sources. When the main tank nears depletion, the lift pump and Fuel Pressure Regulator step in to supply fuel to the FHST. Furthermore, with a boost reference signal (Hobbs Switch), the Fuel Pressure Regulator operates at a 1:1 ratio, allowing fuel pressure to rise proportionally with boost pressure. The low-pressure fuel returning from the Fuel Pressure Regulator is routed back into the surge tank to maintain its fullness. Inside the canister, a 6-hole diverter ensures even fuel dispersion without air bubbles or foaming. The stainless electrical studs included effectively handle high current demands, surpassing the capabilities of compact bulkhead connectors. These resilient connections are sealed against all standard and exotic fuels, with non-conductive acorn nuts provided to prevent accidental short circuits. The kit also includes the necessary electrical hardware for one Walbro fuel pump and the OEM level sender, while the in-tank wiring is insulated with premium chemically resistant ETFE for enhanced durability. If you are planning on running more than one LPFP, you will need to select the Hobbs Switch option for boost reference (to be installed on the manifold or charge pipe), as well as the fuel pump wiring kit! Features: -Drop-In OEM Replacement -Permits 1 or 2 Surge Pumps -1:1 Fuel Pressure Adjustments -Fuel Starvation Protection -Integrated 1-Way Fill Valve -High Current Electrical Hardware -Compatible with Various Pumps -Anodized Aluminum Construction -Gasoline and Ethanol Compliant -Anodized Aluminum 8AN Male Outlet Fitting -Anodized Aluminum Surge Tank Canister -Fuel Resistant Tubing and Wiring -Stainless Steel Hardware -Relay(s) and Fuse(s)
Show More Show Less


Packaged by Turner - Corporate Logo
T#:22097548
Part#: 11281706545TKT
Ships on Nov 12, 2026
Sale - Save 8% $ 263.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.79 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 263.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.79 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes everything you need to service the belt drive system and keep everything in check, including the updated Hydraulic tensioner to keep your E46 driving like a dream. This kit also includes ECS Tuning's Kevlar reinforced belt for longer life and resistance. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:23482923
Part#: 4PK863BTKT
Back Ordered
Sale - Save 1% $ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 279.92 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 279.92 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:23482925
Part#: 4PK863CTKT
In Stock
Sale - Save 9% $ 219.99

This product was last offered at the strikethrough price on
05-03-2026

$ 201.15 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 219.99

This product was last offered at the strikethrough price on
05-03-2026

$ 201.15 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less

Installation Kit For Turbo - Deluxe Full Kit N18
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41458820
Part#: 11652444367T3KT
In Stock
Sale - Save 2% $ 581.99

This product was last offered at the strikethrough price on
09-22-2026

$ 569.07 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 581.99

This product was last offered at the strikethrough price on
09-22-2026

$ 569.07 USD
Free Shipping on orders $49 and up
Designed for seamless installation of an OEM replacement turbocharger, this comprehensive turbo mounting kit includes both variations of the 3-bolt triangular turbo outlet gaskets (select the correct one for your setup). It also comes complete with all necessary oil feed and return lines, coolant lines, mounting studs, and premium Liqui Moly turbo sealant—ensuring a reliable, leak-free, and high-performance turbo install.
Show More Show Less

OEM Ignition Service Kit - E36 M44 1.9L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556712
Part#: E36M44TISKT2
Ships in 9 Business Days
Sale - Save 4% $ 684.99

This product was last offered at the strikethrough price on
05-03-2026

$ 660.51 USD
Free Shipping
Sale - Save 4%
$ 684.99

This product was last offered at the strikethrough price on
05-03-2026

$ 660.51 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:24145971
Part#: X52CYLHDRPKT
Back Ordered
Sale - Save 2% $ 3,910.92

This product was last offered at the strikethrough price on
04-06-2026

$ 3,818.04 USD
Sale - Save 2%
$ 3,910.92

This product was last offered at the strikethrough price on
04-06-2026

$ 3,818.04 USD
Introducing the Complete Cylinder Head Ultimate Replacement Kit for BMW E36, E34, E39, Z3 with M52, S50, and S52 engines - your ultimate solution for efficient and cost-effective engine maintenance. This comprehensive kit is designed to maximize the performance, durability, and longevity of your BMW, ensuring it operates at peak efficiency for years to come. Optimal Engine Performance: Our Complete Cylinder Head Basic Replacement Kit is engineered to enhance your BMW's engine performance. By replacing the cylinder head, you can restore lost power and torque, resulting in improved acceleration and overall driving experience. Improved Fuel Efficiency: Upgrading your BMW with our kit not only boosts power but also enhances fuel efficiency. This means you'll save money on fuel costs while reducing your carbon footprint. Enhanced Durability: The components included in this kit are crafted from high-quality materials, ensuring long-lasting durability. This translates to fewer repairs and less downtime for your vehicle. Cost Savings: Investing in this comprehensive kit is more cost effective than purchasing individual components. It contains everything you need for a cylinder head replacement, eliminating the hassle of sourcing parts separately. OEM-Quality Parts: We prioritize quality and reliability, which is why our kit features OEM-equivalent or superior components. Rest assured that you're getting the best value for your money. Fits Multiple BMW Models: This kit is compatible with various BMW models, including E36, E34, E39, and Z3, with M52, S50, and S52 engines. This versatility ensures that a wide range of BMW enthusiasts can benefit from it. Extended Engine Lifespan: By replacing the cylinder head with our kit, you can significantly extend the lifespan of your BMW engine, leading to more trouble-free miles on the road. Satisfaction Guaranteed: Some kit components are covered by our Lifetime Replacement Program. We stand behind the quality of our Complete Cylinder Head Basic Replacement Kit. Your satisfaction is our priority, and we offer a satisfaction guarantee to provide peace of mind to our valued customers. Kit includes: 1 - BMW Coolant / Anitfreeze 7 - BMW TwinPower Turbo 5W-30 Engine Oil - 1 Liter 1 - Cylinder Head Bolt Kit 1 - Cylinder Head Installation Kit 14 - Cylinder Head Washer - Cylinder Head Bolts 1 - Engine Oil Drain Plug 28 - Exhaust Manifold Nuts 1 - Liquid Assembly Lube - 12 oz 1 - M52 / S52 Cylinder Head - Complete 1 - Turner Motorsport Sticker 1 - Oil Filter Kit 6 - Bremi Ignition Coils 6 - Camshaft Position Sensor 6 - Bosch Spark Plugs
Show More Show Less

Turbos and Turbocharger Installation Kit - N54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:55317702
Part#: 13712247398KT5
Ships on Oct 27, 2026
New Item
$ 1,869.81

This product was last offered at the strikethrough price on
09-10-2026

$ 1,869.38 USD
Free Shipping on orders $49 and up
$ 1,869.38 USD
Free Shipping on orders $49 and up
Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:589856
Part#: PBTABM62KT
Back Ordered
Sale - Save 4% $ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 509.99 USD
Free Shipping
Sale - Save 4%
$ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 509.99 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:2923
Part#: TMS2923
Back Ordered
Sale - Save 8% $ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 757.79 USD
Free Shipping
Sale - Save 8%
$ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 757.79 USD
Free Shipping
2001-2005 E53 X5 3.0-liter Stage 1 Performance Package
Peak Power Gain: +13hp / +7ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFE intake is made from high-quality materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe's Stage 2 Intake uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, ABS plastic intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items work together to bring up huge torque increases and much improved driveability. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice.

2001-2005 E53 X5 3.0-liter Stage 1 Engine Upgrade includes:
aFe Cold Air Intake
Shark Injector performance software

Applications:
2001-2005 E53 X5 3.0-liter
Show More Show Less

Packaged by Turner - Corporate Logo
T#:2893
Part#: TMS2893
In Stock at Vendor
Sale - Save 1% $ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 816.73 USD
Sale - Save 1%
$ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 816.73 USD
2001-2003 E39 525i Stage 1 Performance Package
Peak Power Gain: +8hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

2001-2003 E39 525i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2001-2003 E39 525i sedan
Show More Show Less
Packaged by Turner - Corporate Logo
T#:3593
Part#: TMS3593
In Stock
Sale - Save 8% $ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 842.39 USD
Free Shipping
Sale - Save 8%
$ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 842.39 USD
Free Shipping
2003-2005 E46 325i/Ci (M56 SULEV engine) Stage 1 Performance Package
Peak Power Gain: +8hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

2003-2005 E46 325i/Ci (M56 engine) Stage 1 Engine Upgrade Kit includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2003-2005 E46 325i sedan, 325Ci coupe ( M56 SULEV engine only. )
Show More Show Less
Packaged by Turner - Corporate Logo
T#:2894
Part#: TMS2894
In Stock at Vendor
Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Sale - Save 3%
$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
2001-2003 E39 530i Stage 1 Performance Package
Peak Power Gain: +8hp / +10ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

2001-2003 E39 530i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2001-2003 E39 530i sedan
Show More Show Less


S54 Power Pack
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:402451
Part#: S54-PPK-1
Back Ordered
Sale - Save 16% $ 1,099.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 926.37 USD
Free Shipping
Sale - Save 16%
$ 1,099.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 926.37 USD
Free Shipping
Everything you need to begin making your E46 M3 the track monster of your dreams. The S54 Power Pack is our curated list of bolt-on upgrades that will unleash the true potential of your motor. 
Show More Show Less
Turner Motorsport E46 M3 Power Pack - Stage 2+
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:586780
Part#: E46M3PP2P
Ships in 2 Business Days
Sale - Save 6% $ 1,922.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,804.49 USD
Free Shipping
Sale - Save 6%
$ 1,922.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,804.49 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 2+ kit offers the following upgrades: Eventuri Carbon Fiber Intake Kit - Increase airflow volume to increase performance at all RPMs and make your engine bay look great with high-quality carbon fiber Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications Turner Motorsport Power Pulley Kit (2 Options) - Free up power that is normally stolen from accessories with underdrive pulleys Intake Air Temperature (IAT) Relocation Harness - Prevent heat soak and false air temperature readings to maintain proper timing and fuel mixture ratios
Show More Show Less
Turner Motorsport E46 M3 Power Pack - Stage 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:586779
Part#: E46M3PP2
In Stock
Sale - Save 9% $ 1,331.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,213.49 USD
Free Shipping
Sale - Save 9%
$ 1,331.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,213.49 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 2 kit offers the following upgrades: aFe Performance Intake Kit Pro5r - Increase airflow volume to increase performance at all RPMs Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications Turner Motorsport Power Pulley Kit (2 Options) - Free up power that is normally stolen from accessories with underdrive pulleys Intake Air Temperature (IAT) Relocation Harness - Prevent heat soak and false air temperature readings to maintain proper timing and fuel mixture ratios
Show More Show Less

Turner Motorsport E46 M3 Power Pack - Stage 1+
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:586778
Part#: E46M3PP1P
Ships in 2 Business Days
Sale - Save 3% $ 1,519.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,474.10 USD
Free Shipping
Sale - Save 3%
$ 1,519.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,474.10 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 1+ kit offers the following upgrades: Eventuri Carbon Fiber Intake Kit - Increase airflow volume to increase performance at all RPMs and make your engine bay look great with high quality carbon fiber Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications
Show More Show Less

Timing Chain Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23947139
Part#: 11151705272TKT
Ships in 1-2 days
Sale - Save 11% $ 1,055.60

This product was last offered at the strikethrough price on
05-03-2026

$ 942.05 USD
Sale - Save 11%
$ 1,055.60

This product was last offered at the strikethrough price on
05-03-2026

$ 942.05 USD
WPC Performance Rod Bearing Replacement Kit - Dry
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57267800
Part#: 11247838088DKT
In Stock
New Item
$ 993.83 USD
Free Shipping on orders $49 and up

Accessory Belt Service Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56218611
Part#: N55BMWKT4
Ships on Jan 11, 2027
New Item
$ 198.13 USD
Free Shipping on orders $49 and up
This comprehensive drive service kit is built around high grade Continental and INA original equipment parts. Designed to handle high load operation, this kit restores factory belt geometry and dynamic tensioning
Show More Show Less
Packaged by Turner - Corporate Logo
T#:50731686
Part#: 054995LA-272KT2
Ships on Dec 18, 2026
Sale - Save 8% $ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD
Free Shipping on orders $49 and up

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track, using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These are a direct replacement for the stock camshafts and offer increased flow at mid and higher RPMs, thanks to 12.5mm of valve lift. Unlike 288/280 camshafts, this 280/272 set does not require upgraded valvetrain parts. The profile of these camshafts is quite close to stock CSL specs.

KIT INCLUDES

Schrick 272-Degree Exhaust Camshaft Schrick 280-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

OEM Accessory Belt Service Kit - E90 335d
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554452
Part#: 335DACCKT
Ships on Jan 28, 2027
Sale - Save 2% $ 232.99

This product was last offered at the strikethrough price on
08-26-2026

$ 229.22 USD
Free Shipping
Sale - Save 2%
$ 232.99

This product was last offered at the strikethrough price on
08-26-2026

$ 229.22 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:27672135
Part#: 11238511371TKT7
Ships on Mar 2, 2027
Sale - Save 1% $ 751.99

This product was last offered at the strikethrough price on
08-26-2026

$ 745.52 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 751.99

This product was last offered at the strikethrough price on
08-26-2026

$ 745.52 USD
Free Shipping on orders $49 and up
The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less
Packaged by Turner - Corporate Logo
T#:27672136
Part#: 11238511371TKT8
Ships on Mar 2, 2027
Sale - Save 1% $ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 556.40 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 556.40 USD
Free Shipping on orders $49 and up
The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401689
Part#: OILTEMPGAUGEBRKK
Back Ordered
Sale - Save 2% $ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
Sale - Save 2%
$ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
Show More Show Less


Performance ultimate Timing Belt Kit - Level 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710790
Part#: 11519070759-KT
Ships in 3 Business Days
Sale - Save 6% $ 315.99

This product was last offered at the strikethrough price on
08-20-2026

$ 296.84 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 315.99

This product was last offered at the strikethrough price on
08-20-2026

$ 296.84 USD
Free Shipping on orders $49 and up
Often overlooked, your timing belt is a crucial component that requires replacement every 60,000 miles. It is common for an unserviced timing belt to snap without warning, leaving you with bent valves and costly repairs. Gates Racing's timing belt is constructed of HNBR elastomeric composites. That being said, they are 300% stronger than the OE belt & deliver up to three times the heat resistance. Also included in this kit are the following: Gates Racing Timing Belt Tensioner Tensioner Spring and Bolt Water Pump & Gasket Thermostat & Gasket Camshaft Seal 1 Liter of Coolant Radiator Drain Plug For vehicles with production date from 09/1987.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:23416510
Part#: 11287833264T2KT
Back Ordered
Sale - Save 17% $ 755.99

This product was last offered at the strikethrough price on
05-03-2026

$ 626.02 USD
Free Shipping on orders $49 and up
Sale - Save 17%
$ 755.99

This product was last offered at the strikethrough price on
05-03-2026

$ 626.02 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioners, and pulleys required to install the new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Motor And Transmission Mount Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744021
Part#: 22322282340-KT
Back Ordered
Sale - Save 3% $ 420.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.87 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 420.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.87 USD
Free Shipping on orders $49 and up
Upgrade your mounts without compromising comfort. Includes hardware

Low-Temperature N54 Oil Thermostat Overhaul Kit
10X Entries Into Our F80 M3 Sweepstakes
For 2006-2007 models only
Packaged by Turner - Corporate Logo
T#:26705005
Part#: 090766ECS09KT2
Back Ordered
Sale - Save 9% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.36 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.36 USD
Free Shipping on orders $49 and up

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Performance Accessory Belt Service Kit - E36 S50 M50
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:30430686
Part#: 11281703943KT3
Back Ordered
Sale - Save 8% $ 267.99

This product was last offered at the strikethrough price on
05-03-2026

$ 246.54 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 267.99

This product was last offered at the strikethrough price on
05-03-2026

$ 246.54 USD
Free Shipping on orders $49 and up

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

To solve this issue, the enthusiasts at Turner Motorsport assembled this kit with high-quality components. Furthermore, an ECS Tuning High-Performance Kevlar-reinforced accessory belt is included for boosting both engine bay aesthetics and reliability.

Show More Show Less
E39 M5 99-03 Stage 1 Turner Motorsport Performance Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:2916
Part#: TMS2916
Back Ordered
Sale - Save 1% $ 1,236.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,224.13 USD
Free Shipping
Sale - Save 1%
$ 1,236.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,224.13 USD
Free Shipping
1999-2003 E39 M5 Stage 1 Performance Package
Peak Power Gain: +18hp / +20ft-lbs
Rev limit: 7400
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFE intake is made from high-quality materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe's Stage 2 Intake uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, ABS plastic intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items work together to bring up huge torque increases and much improved driveability. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice.

1999-2003 E39 M5 Stage 1 Engine Upgrade includes:
aFe Cold Air Intake
Shark Injector performance software

Applications:
1999-2003 E39 M5 sedan
Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit
10X Entries Into Our F80 M3 Sweepstakes
For 2008+ models only
Packaged by Turner - Corporate Logo
T#:26705034
Part#: 090743ECS09KT2
Back Ordered
Sale - Save 9% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.76 USD
Free Shipping on orders $49 and up

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less
Ultimate Timing Belt Kit - Level 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710771
Part#: M20_11-KT
Ships in 3 Business Days
Sale - Save 11% $ 226.99

This product was last offered at the strikethrough price on
04-16-2026

$ 202.62 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 226.99

This product was last offered at the strikethrough price on
04-16-2026

$ 202.62 USD
Free Shipping on orders $49 and up
Often overlooked, your timing belt is a crucial component that requires replacement every 60,000 miles. It is common for an unserviced timing belt to snap without warning, leaving you with bent valves and costly repairs. Included in this kit are the following: Timing Belt Tensioner Tensioner Spring and Bolt Water Pump & Gasket Thermostat & Gasket Camshaft Seal 1 Liter of Coolant Radiator Drain Plug For vehicles with production date from 09/1987.
Show More Show Less

Complete Fuel Injector Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677494
Part#: 13537528539-KT
Back Ordered
Sale - Save 3% $ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.89 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.89 USD
Free Shipping on orders $49 and up
A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.
Show More Show Less

OEM Ignition Service Kit - E34 M20 2.5L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556703
Part#: E34M20TISKT2
Back Ordered
$ 415.25 USD
Free Shipping
$ 415.25 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Turner Oil Separator Kit - E53 X5 M62 4.4L 4.6L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:555308
Part#: 11151705237KT1
Back Ordered
Sale - Save 11% $ 208.99

This product was last offered at the strikethrough price on
05-03-2026

$ 186.75 USD
Free Shipping
Sale - Save 11%
$ 208.99

This product was last offered at the strikethrough price on
05-03-2026

$ 186.75 USD
Free Shipping

The rubber hoses and oil separator can crack or become faulty, leading to vacuum leaks or oil leaks. This is caused by the stress the components are exposed to during heating and cooling cycles, especially if the vehicle is not brought up to operating temperature during driving in cold weather climates.

This kit includes the needed hoses, oil separator, and hardware.

Fits the following BMWs:
1999-2006 E53 BMW with M62 4.4L 4.6L

Show More Show Less
E36 M3 95 Stage 1.5 Turner Motorsport Performance Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338686
Part#: E36EURO-ST1.5
Back Ordered
Sale - Save 20% $ 1,476.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 1,181.59 USD
Free Shipping
Sale - Save 20%
$ 1,476.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 1,181.59 USD
Free Shipping
E36 M3 OBD-I Stage 1.5 Performance Package
Peak Power Gain: +32hp / +23ft-lbs
Rev limit: 7000
Octane: 91 or higher

This Stage 1.5 Package adds the option of larger 21.5lb fuel injectors to the Stage 1 Euro HFM kit. The 21.5lb injectors (23lb at BMW's 3.5 bar) were standard on the S52 3.2-liter engines. Because that engine has found its way into many other E36s, we put this kit together to use the Euro HFM, intake, and the stock 3.2 injectors. Also, it's been necessary for some people to add more fuel to account for cleaner-burning gasoline used in the US. With the lower grade fuel, pinging, knocking, or lean conditions may be experienced with the stock 3.0 injectors. The issues people are having seem to be geography-related (California, the Northeast, etc.) but many people feel safer having a fuel 'safety net' and this Package meets their goals. We also offer a Stage 2 Package with 24lb injectors if these are still not flowing enough fuel. There is no performance gain with only adding the 21.5lb injectors.

We use the aFe 'Euro' Intake Kit, Bosch Euro HFM, Bosch 21.5lb injectors, and a special TMS Stage 1.5 Performance Chip. The aFe intake is made with heat-blocking materials, reducing underhood emperatures and not contributing to heat soak of the air filter. The aFE intake uses an oiled cotton air filter for maximum air flow and excellent filtration.

With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5� Euro HFM and Euro Intake, the M3�s engine can breathe a lot better. This kit works on all 1995-1999 M3s with the US S50 3.0-liter or S52 3.2-liter engine (and using OBD-I engine computer).Our TMS Performance Chip is tuned specifically for the Euro HFM, aFe Intake, and 21.5lb injectors. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

Clickhere for feedback on this package.

E36 M3 Stage 1.5 Engine Upgrade Kit includes:
aFe 'Euro' Cold Air Intake (filter, heat shield, intake tube)
Bosch Euro M3 HFM
HFM adapter
TMS Performance Chip (we need your car's production date, choose from below)

21.5lb Fuel Injectors
This kit is sold without the fuel injectors but we can sell you a new set. Select the option below if you would like new Bosch injectors sent with your order. Otherwise, all M52 2.8 and S52 3.2 liter engines came with them so there are lots of used injectors available from eBay, forums, Craigslist, etc.

Applications:
1995 E36 M3 3.0 (21.5lb injectors required) (manual transmission only)
1996-99 E36 M3 3.2 (manual transmission only) only for cars with OBD1 conversion
any S50 or S52 with OBD-1 in an E36 (330i, 332i, 332ti, etc)
Show More Show Less