Packaged by Turner BMW Cooling System Parts & Accessories

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Behr thermostat with O-ring
• Thermostat mounting hardware
• 1 Gallon BMW coolant

This item fits the following BMWs: 

1997-1998  E39 BMW  540i

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Behr thermostat with O-ring
• Thermostat mounting hardware
• 1 Gallon BMW coolant

The cooling system is one of the major weak points on the N62 engine in the 550i/650i. The water pump itself won't last more than 100,000 miles in most cases and the engine itself is prone to coolant leaks from multiple locations. So a major 550i cooling system overhaul should be planned before the 100,000 mile mark. Aside from obvious leaks the 550i water pump will also squeal or screech indicating the bearings inside have worn. This package covers the water pump, thermostat, and radiator for the 2006-2010 E60 550i and E63 650i with a manual transmission.

The entire cooling system on the 550i is susceptible to leaks and poor performance. The condition of the rest of the cooling system should be considered along with the water pump and thermostat. Replacing the water pump will expose the front of the V8 engine where more problem areas may appear so plan accordingly. The biggest problem is the V8 valley pan gaskets and inner coolant tube seals. The tube carrying coolant through the valley is prone to leaking and replacement is a major job (see our valley pan pipe kit here). Additional items recommended to be replaced during the water pump job are: cooling hoses, expansion tank and cap, temp sensors, drive belts, and pulleys and tensioners.

Base 550i/650i Cooling Package includes:

• OEM Behr radiator (17117519210)
• OEM water pump (11517586779)
• water pump pipe (back of pump to engine block) (11511439976)
• OEM thermostat (11537586885)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  This item fits the following BMWs:
  2006-2010 E60 BMW 550i with manual transmission
  2006-2011 E63 BMW 650i with manual transmission

Regular maintenance of your BMW's cooling system is crucial, with the water pump being a known weak point across all models. To ensure optimal performance, it's recommended to service the water pump every 60,000 miles and replace the thermostat simultaneously. Turner Motorsport makes this process seamless with our comprehensive Water Pump & Thermostat Replacement Kit.

Why Choose Our Kit?

Convenience: All essential parts are bundled in one kit. Quality: Components from trusted brands like MAHLE and Graf. Reliability: High-quality parts ensure a perfect fit and long-lasting performance. Value: Save time and money with our complete kit. Kit Contents:

MAHLE Thermostat (Part #: 11518512234) Graf Water Pump Assembly (Part #: 11518516205) Genuine BMW Thermostat Gasket (Part #: 11518516207) Genuine BMW Bolt (Part #: 11518512449) Genuine BMW Bolt (M6x30) (Part #: 07119906123) Genuine BMW Coolant/Antifreeze (Concentrate, 1 Gallon) (Part #: 82141467704) Ready for a Cooling System Overhaul?

Opt for Turner Motorsport's Water Pump & Thermostat Replacement Kit for a hassle-free, effective repair that keeps your BMW running cool and smooth.

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E30 with the M42 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

318i 318is M42

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat ECS Performance Silicone Radiator Hose Kit Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

Our Level 2 High-Performance Cooling System Service Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our all-inclusive "Level 2" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank ECS Silicone Radiator Hoses ECS Aluminum Water Pump Pulley Wahler Thermostat (80°C) Bremmen Aluminum Water Pump Bremmen Parts Auxiliary Fan Switch Continental Accessory Belt ECS Kevlar-Reinforced A/C Compressor Drive Belt Genuine BMW Water Pump O-Ring Genuine BMW Water Pump Bolts Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

• 80 degree Celsius thermostat
• 1 liter of Genuine BMW coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• 16 inch Electric fan 
• Electric fan mounting kit
• Fan controller kit with probe sensor 
• Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E82/88 135i or E90/92/93 335i/xi/is with the N54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

For vehicles with automatic or DCT transmission only

In as little as 60,000 miles, cooling system components are prone to failure. Due to weak plastic and rubber construction, vital cooling system parts—such as the radiator hoses and the expansion tank—can fail spectacularly, risking damage to internal engine components.

Prevent costly engine damage and ensure long-term reliability with our Performance Cooling System Refresh Kit, featuring components hand-picked by our team of BMW enthusiasts. This comprehensive kit includes high-quality components designed to address common failure points, providing a durable, performance-focused cooling system repair. By replacing aging factory parts with premium alternatives, you can enhance cooling efficiency and protect your engine from the stress of overheating.

This full-service "Level 1" Performance Cooling System Refresh Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank OE Expansion Tank Cap OE Coolant Level Sensor Silicone Coolant Overflow Hose OE Radiator Hoses Mishimoto Racing Thermostat (68°C) Geba Water Pump w/ Aluminum Impeller OEM Timing Belt Kit with Tensioner Radiator Drain Plug Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

In as little as 60,000 miles, cooling system components are prone to failure. Due to weak plastic and rubber construction, vital cooling system parts—such as the radiator hoses and the expansion tank—can fail spectacularly, risking damage to internal engine components.

Prevent costly engine damage and ensure long-term reliability with our Performance Cooling System Refresh Kit, featuring components hand-picked by our team of BMW enthusiasts. This comprehensive kit includes high-quality components designed to address common failure points, providing a durable, performance-focused cooling system repair. By replacing aging factory parts with premium alternatives, you can enhance cooling efficiency and protect your engine from the stress of overheating.

This full-service "Level 2" Performance Cooling System Refresh Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank OE Expansion Tank Cap OE Coolant Level Sensor Silicone Coolant Overflow Hose ECS Tuning Aluminum Radiator OE Radiator Hoses Mishimoto Racing Thermostat (68°C) Geba Water Pump w/ Aluminum Impeller OEM Timing Belt Kit with Tensioner Radiator Drain Plug Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

09/2002 - 2006 - E53 3.0i with manual transmission 

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

2000 - 0/2002 - E53 3.0i with manual transmission