Packaged by Turner BMW Cooling System Parts & Accessories

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance ECS Tuning Aluminum Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 68*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

Additional items included in this kit:

• ECS Tuning Silicone Coolant Hoses - For increased reliability over the stock rubber hoses
• ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Low Temperature Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased coolant flow and reliability over the stock composite pulley

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E46 with the M52/54 engine.  

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This cooling system overhaul kit fits the following BMWs: 
1999-2000 E46 3 Series Sedan/Wagon - 323i & 328i 
1999-2000 E46 3 Series Coupe/Convertible - 323Ci & 328Ci 
2001-2002 E46 3 Series Sedan/Wagon - 325i, 325xi, 330i, 330xi 
2001-2002 E46 3 Series Coupe/Convertible - 325Ci, 330Ci 

Maintain your BMW's cooling system and avoid costly repairs with our comprehensive Water Pump and Thermostat Replacement Kit, meticulously crafted by the experts at Turner Motorsport! Designed to service BMW models with the N62 engine, this kit ensures your vehicle runs at optimal temperature, preventing overheating and extending engine life.

Key Benefits:

All-Inclusive Kit: This package includes everything you need for a complete cooling system overhaul, saving you time and effort sourcing individual components. High-Quality Components: Each part in this kit is manufactured to meet or exceed OEM standards, guaranteeing reliable performance and longevity. Optimal Cooling Performance: Regularly replacing your water pump and thermostat every 60,000 miles is crucial for maintaining peak cooling efficiency. Our kit ensures your BMW's engine stays within the ideal temperature range, preventing overheating and potential engine damage. Enhanced Reliability: By including premium components like the Wahler Thermostat and Graf Water Pump, this kit provides enhanced durability and peace of mind. Kit Contents:

Wahler Thermostat (Part #11537586885): Renowned for its precision and reliability, ensuring your engine maintains the correct operating temperature. Graf Water Pump (Part #11517586779): High-performance pump designed for consistent and efficient coolant circulation. Genuine BMW Hex Bolts (M6x25) (Part #07119905400): Essential hardware for secure installation. Genuine BMW Hex Bolts (M6x40) (Part #07119904525): Ensures all components are firmly in place. Genuine BMW Coolant/Antifreeze (Diluted, 1 Gallon) (Part #82141467704): Formulated specifically for BMW cooling systems, providing optimal protection against corrosion and freezing. Upgrade your BMW N62 cooling system with this expertly curated Water Pump and Thermostat Replacement Kit. Perfect for maintaining the health and efficiency of your engine, this kit is an essential investment for any BMW enthusiast. Order now from Turner Motorsport and ensure your vehicle performs at its best.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Rein thermostat
• Thermostat mounting hardware
• 1 liter of coolant

This item fits the following BMWs: 
1999-2003  E39 BMW  540i 
 

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Behr thermostat with O-ring
• Thermostat mounting hardware
• 1 Gallon BMW coolant

This item fits the following BMWs: 

1997-1998  E39 BMW  540i

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Behr thermostat with O-ring
• Thermostat mounting hardware
• 1 Gallon BMW coolant