The 2.7 liter inline-6 is a torquey car, however, performance drops off greatly after 4000 RPM. With a Turner Performance Chip power is boosted at all RPM but most importantly in the upper RPM. The car really feels more alive! This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and park maps to take advantage of 91 octane gasoline. By making the engine more efficient with this fuel, gains in horsepower and torque are achieved as well as making the engine run smoother.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain +24 @ 4,500 RPM

Torque Gain: +28 @ 4,500 RPM

New Rev Limit: 5,300 RPM

NOTE: your car may have a replacement DME ending in 021. Our chips will work in this replacement computer as long as the existing chip is not soldered.

This item fits the following BMWs:
1985-1987 E30 BMW 325e 325es
1985-1987 E28 BMW 528e with build date of 09/1984 up to 09/1987

Turner Performance Chip: Unleash Your BMW's Hidden Power

Discover the effortless way to enhance your BMW's performance with the Turner Performance Chip. Dyno-tuned by the renowned BMW expert, Jim Conforti, this chip offers a gateway to increased power and torque, all while preserving the essence of your BMW. Explore the compelling features of this remarkable product:

• Unlock the true potential of your BMW with the Turner Performance Chip. Carefully designed to optimize high-octane (91+) pump gas, it delivers superior mid-range torque and high-RPM horsepower, thanks to Jim Conforti's meticulous tuning.
• Experience a performance boost with raised rev limits and precisely tuned fuel and spark maps, ensuring your BMW surpasses its factory performance without compromising safety and driveability.
• Enjoy a hassle-free installation process – each chip is crafted for accessibility, arriving with detailed instructions. Enthusiasts using common hand tools can typically complete the installation within an hour.
• Benefit from Turner Motorsport and Jim Conforti's wealth of experience, spanning over 20 years in the realm of BMW software tuning. These performance chips stand out from generic eBay alternatives, as they are meticulously designed with extensively tested fuel and spark maps, ensuring peak performance without any compromise.
• Jim Conforti, a recognized authority in BMW chip tuning, has been perfecting the BMW driving experience since 1995. With over 10,000 units sold, his reputation is a testament to the unparalleled expertise in the field. Opt for the best – your BMW deserves nothing less.
• The legendary M30 "big six" engine, known for its mid-range torque, can now achieve even greater high-end power with the Turner Conforti Performance Chip. It significantly enhances peak horsepower and mid-range torque, revitalizing your BMW's performance and maintaining its unique character.
• Key Performance Metrics: - Horsepower Gain: +24 @ 5,000 RPM - Torque Gain: +29 @ 2,000 RPM - New Rev Limit: 6,600 RPM
• Rest assured with provided installation instructions, ensuring a straightforward process even for enthusiasts.
• Turner's confidence in the transformative potential of this product is underscored by their 30-day money-back guarantee, backed by ECS Tuning.

Adding a TMS Performance Chip gives you the biggest bang for your buck! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. While not exactly producing V8-levels of torque you will definitely like the power increase across the rev band. The best thing is that there is NO downside to installing a Turner Performance Chip. urner Motorsport has been in the BMW chip business since 1995 and all chips have been dyno-tuned to achieve optimum performance and safety. As an added feature, the top speed limiter is removed. Premium 91+ octane fuel is required.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.

Horsepower Gain: +24 @ 7,600 RPM
Torque Gain: +19 @ 6,000 RPM
New Rev Limit: 7,800 RPM

This performance chip fits the following BMWs:
1988-1991 E30 BMW M3 (US 2.3L)

BMW E36 Shark Injector Performance Software is the ultimate upgrade for boosting the power and torque of your BMW. This performance software, meticulously dyno-tuned by BMW expert Jim Conforti, is engineered to enhance the potential of high-octane (91+) pump gas, significantly increasing mid-range torque and high-RPM horsepower. The Shark Injector also features an increased rev limit, fine-tuned fuel and spark maps, and optimized performance, ensuring that your BMW exceeds its factory capabilities. The installation is straightforward, typically taking just an hour, and maintains drivability while improving responsiveness.

• Adds +15 HP at 6,400 RPM and +9 lb/ft torque at 4,500 RPM
• Increases rev limit to 7,000 RPM for enhanced engine performance
• Optimized for high-octane fuel, elevating mid-range torque and high-RPM horsepower
• Installation is simple with detailed instructions and takes approximately one hour
• Retains original data for potential future use and eliminates the speed limiter

Note: The Shark Injector software is specifically designed for NORTH AMERICAN SPEC BMWs and is not compatible with EURO-SPEC models.

Enhance your BMW's power and torque effortlessly with the Turner Performance Chip, the ultimate answer to performance prayers. Dyno-tuned by BMW legend Jim Conforti, these chips are crafted to optimize high-octane (91+) pump gas, boosting mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are meticulously fine-tuned to elevate your BMW's performance without compromising reliability.

• Dyno-tuned by BMW legend Jim Conforti for optimal performance
• Designed to maximize high-octane (91+) pump gas
• Raises the rev limit for increased performance
• Fine-tuned fuel and spark maps for enhanced power
• Maintains driveability and improves responsiveness
• Shipped with detailed instructions for easy installation
• Turner Motorsport and Jim Conforti's 20+ years of expertise
• Over 10,000 units sold, backed by a 30-day money-back guarantee
• Total performance upgrade for BMW's M50 engine

Experience a horsepower gain of +20 @ 6,000 RPM, a torque gain of +13 @ 4,500 RPM, and a new rev limit of 7,000 RPM. Trust in Turner's confidence with a 30-day money-back guarantee serviced by ECS Tuning.

Adding a Turner Performance Chip gives you the biggest bang for your buck! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. While not exactly producing V8-levels of torque you will definitely like the 38ft-lb increase at 3500 RPM - right at the start of the power band. The best thing is that there is NO downside to installing a TMS Performance Chip. Turner Motorsport has been in the BMW chip business for close to 10 years and all chips are dyno-tuned to achieve optimum performance and safety. As an added feature, the top speed limiter is removed. Premium 91+ octane fuel is required.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.
 

Horsepower Gain:+39 @ 7,000 RPM

Torque Gain:+38 @ 3,500 RPM

New Rev Limit7,500
 

This performance chip fits the following BMWs:
1991-1993 E34 BMW M5 (US 3.6L)

• Unlock torque and horsepower
• Smoother engine with less hesitation
• Improved throttle response
• Rev limit increased to 7000
• Top speed limiter removed
• Installs in minutes!

Performance software is a  must-have  upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

2001-2006 E46 325i (M54/M56 engine) Performance Software Peak Gains

E46 325i dyno chartHP Gain Up To+ 7 @ 5800 RPM

Torque Gain Up To + 7 @ 4700 RPM

New Rev Limit7000 RPM

E46 325 M54 vs. M56 Engines

(click to expand)

Does your 325 have the M56 "SULEV" Engine? Many of the 325's produced for the US -- particularly in California, Massachusetts, and a few other states -- came with a different engine, the M56 which meets "SULEV" (Super Ultra Low Emission Vehicle) emissions classification. A visual inspection of your engine (as shown below) is the best way to determine if your 325 has the M56 SULEV engine.

Read what others are saying!

(click to expand)

greekpsycho, 325i: "I sharked my 325 a few months ago and I noticed a huge difference. This REALLY brought out the best of my car."
TJ710, 325i: "just did this to my own stock 325i about 3 weeks ago and I definitely felt a difference and it put a smile on my face."
Dahmwern, 325Ci: "I'm definitely noticing a sweetly smooth power delivery, as well as a noticeable power increase in the low end as you being to accelerate (especially up moderate inclines). Note: This is NOT placebo effect. I drove the same route before and after to compare, and while its not perfectly scientific, it was quite obvious that there were some changes that took place - changes for the better. Like many mods, the car should have come this way!"

Rob43, 330i: "besides the 7000rpm, removal of the top speed limiter, and very good(improved) throttle response, I got 6.5WHP on the dyno with my Shark injector. That’s worth $300 bucks in my book."
xixixi, 330xi: "I got the shark for my 330xi, I love it. Shark > all. Why? It gives gains that other "custom tunes," can't. What I liked the most about my shark is shift points. If you can shift decent, you can stay in the 5.5k+ range."
Douglas, 330Ci: "Just last week I had your Shark Injector installed in my 2001 330Ci. What a difference it makes! I already loved the car and it’s a great car to drive, but this takes it to a new level."
Steve 330i: "I bought the software and CAI by Jim C. Installed both at the same time and have put around 500 miles on over the last month. The car is amazing to drive, and the software seemed to make the power band a bit flatter, less of a dip and a bit better at the lower RPMS."

nleksan, 330i ZHP: "Ditch the Brand XXXXX software and switch it up for the newly-released Conforti Shark Injector for your car. It will give you a higher redline, no top-speed, more power, and much better throttle response, even over the Brand XXXXX."
3579az, 330i ZHP: " The throttle response problem has been solved. I can now perform perfect rev-matches with ease, unlike before. I've been heel-and-toe downshifting all day with a major success rate of perfect shifts, which is a LOT more than could be said compared to stock. I can now pull cleanly through the rev range without feeling any hesitation or dead spots. I have confirmed that the dead spot that was painfully obvious before the flashing… is gone."
pyreguy, 330i ZHP: "I have been VERY pleased with mine. The dead spot being irradiated was the best thing EVER."
Scott, 330i ZHP: "Very increased acceleration - especially from around 3,000 to 6,000. The car feels like a bullet! It is the same smooth kind of power too - just more of it, delivered continuously to the top rpm. So 3rd feels more like 2nd gear now! Throttle transitions are much more refined. So when in low gears, on and off throttle changes are very seamless and smooth (no jerking) - and the change has made shifting gears easier - especially first to second. So now my car is much more fun to drive and shows engine performance that is better matched to the incredible handling ability it has. I'm very pleased with this upgrade and can't thank you enough!!!

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
2001-2006   E46 BMW  325i 325ci 325xi

A Turner Performance Chip for the 1992 E36 325i is an absolute MUST-HAVE performance upgrade. This chip was developed on the dyno to increase horsepower and torque from low RPM all the way up to the new 7000 RPM rev limit. Engine management expert Jim Conforti tuned the fuel and spark mapping to maximize output when used with 91+ octane fuel. More power, a smoother engine, and better response are the results. Bang for the buck, this is hands-down the best upgrade to do. The rev limiter is raised to 7000 RPM and the top speed limiter has been deleted.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.
 

Horsepower Gain Up To:+20 @ 6,000 RPM

Torque Gain Up To:+13 @ 4,500 RPM

New Rev Limit7,000

Required Vehicle Info

E36 325i/is 92Bosch ECU part number, beginning with "0 261"

This performance chip fits the following BMWs:
1992 E36 BMW 325i 325is

Revitalize your BMW effortlessly with the Turner Performance Chip, the ultimate solution for boosting power and torque. Crafted by BMW tuning legend Jim Conforti, these chips are meticulously designed to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is elevated, and fuel and spark maps are fine-tuned, ensuring your BMW outperforms its factory specifications. No compromises – each Turner Performance Chip is engineered for safe performance improvement while maintaining driveability and responsiveness. Shipped with detailed instructions, enthusiasts can typically install these chips within an hour using hand tools.

• Dyno-tuned by BMW legend Jim Conforti for optimal performance
• Designed for high-octane (91+) pump gas
• Boosts mid-range torque and high-RPM horsepower
• Fine-tuned fuel and spark maps for enhanced power
• Maintains driveability and improves responsiveness
• Easy installation with detailed instructions included
• Horsepower Gain: +19 @ 5,000 RPM, Torque Gain: +16 @ 3,500 RPM
• New Rev Limit: 7,000 RPM for an exhilarating driving experience
• Tuning options available for aftermarket upgrades
• 30-day money-back guarantee for confidence in your purchase

Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.

Unleash Your BMW's Potential with the Shark Injector

Are you searching for the simplest way to boost the power and torque of your BMW? Look no further than the Shark Injector. This cutting-edge software, expertly dyno-tuned by BMW tuning legend Jim Conforti, is meticulously crafted to optimize the capabilities of high-octane (91+) pump gas. It elevates mid-range torque and high-RPM horsepower to deliver an exhilarating driving experience.

Here's why the Shark Injector is a must-have for BMW enthusiasts:

• A raised rev limit and fine-tuned fuel and spark maps surpass factory performance standards.
• Safely enhances performance without compromising driveability or responsiveness.
• Effortless installation with comprehensive instructions, typically completed in just an hour.
• Engineered for a seamless plug-and-play experience.
• The Shark Injector replaces portions of the stock software while preserving original data for future use.
• Once the LED indicator turns green, you're ready to experience your BMW's newfound performance capabilities.

Jim Conforti meticulously tailored the Shark Injector for the BMW M54 engine, already renowned for its precision. This upgrade delivers an additional 7 HP and 7 lb/ft of torque, enhancing engine response, and eliminating the speed limiter. The rev limit is raised to 7,000 RPM, unlocking the full potential of your BMW and enhancing your driving experience, particularly under various throttle conditions.

Please note: The Shark Injector software is exclusively compatible with NORTH AMERICAN SPEC BMWs and is not suitable for EURO-SPEC BMWs.

• The easiest software upgrade in the world!
• Dyno-developed power and torque gains - up to 15hp!
• Compatible with most-common performance upgrades
• Restore to stock at any time
  
• The Shark Injector installs through the OBD-II port in your car no need to remove your ECU and ship it! The Shark Injector software re-maps the fuel and ignition data at part-throttle and wide-open throttle to take advantage of high octane fuel. The Shark Injector was developed by Jim Conforti, whose BMW programs are generally regarded as the best performance software that money can buy. The Mini software was developed on the dyno to give you more horsepower and torque, quicker and smoother throttle response, a higher rev limit, and removal of the top speed limiter. The Shark Injector is compatible with many different modifications: 16-18% supercharger pulleys, cold air intake kit, and cat-back exhaust so there is no need to re-tune your car after every modification. This is the easiest software tool available for the Mini Cooper S with only a battery charger required for installation. Among the other benefits is the ability to restore your car back to stock at any time. Choose from 91 or 93 minimum octane.
   

  Shark Injector Info Center

  Shark Injector FAQ

  Mini Shark Injector installation instructions
  This item fits the following BMWs:
  2002-2006 R53 MINI MINI Cooper S (manual transmission only)

• Unlock torque and horsepower
• Smoother engine with less hesitation
• Improved throttle response
• Rev limit increased to 7000
• Top speed limiter removed
• Installs in minutes!

E46 330i dyno chart	HP Gain		+ 4 @ 6100 RPM
	Torque Gain		+ 7 @ 3400 RPM
	New Rev Limit		7000 RPM

330i ZHP dyno chart	HP Gain		+ 14 @ 6400 RPM
	Torque Gain		+ 11 @ 4100 RPM
	New Rev Limit		7000* RPM

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

Stage 2 Performance Software for E36 M3, MZ3 (Turner-Porsche 3.5" HFM, larger injectors)

Conforti Shark Injector performance software tuned for our Stage 2 OBD2 package: larger fuel injectors, Porsche 3.5" HFM, and intake. This is the correct software to use with the desireable Porsche 803/809 HFM on the OBD2 E36 M3. You should not be running a larger HFM without software and injectors - you're in danger of running too lean! On the dyno we found that the stock fuel injectors were not capable of providing enough fuel to keep up with the increased airflow. This "leaner" fuel mixture was dangerous as it could lead to hotter combustion temps and burning or melting of critical components. With the correct HFM, larger injectors, and this software you will be back to running correct air-fuel ratios.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
 

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
1996-1999 E36 BMW M3

Unlock the hidden power and torque of your BMW with a Turner Performance Chip, the ultimate solution for boosting your vehicle's performance. These chips, meticulously dyno-tuned by BMW tuning legend Jim Conforti, are specially designed to maximize the potential of high-octane (91+) pump gas. Elevate your driving experience with increased mid-range torque and high-RPM horsepower. The installation is hassle-free and typically takes only an hour for an enthusiast equipped with basic hand tools.

Key Features:

• Turner Performance Chip: Your path to increased power and torque for your BMW.
• Precision Tuning: Dyno-tuned by BMW tuning expert Jim Conforti.
• Optimized Performance: Enhances mid-range torque and high-RPM horsepower.
• Improved Rev Limit: Raises the rev limit for enhanced engine performance.
• Enhanced Fuel and Spark Maps: Fine-tuned for superior performance.
• Plug-and-Play: Easy installation with detailed instructions included.
• No Downsides: Safely improves performance while enhancing driveability and responsiveness.
• Turner Motorsport Expertise: Over 20 years of experience in BMW software tuning.
• Top-Quality Design: Unlike eBay chips, these chips ensure top performance without risking engine damage.
• Jim Conforti Legacy: Widely recognized as a leader in BMW chip tuning since 1995.
• Horsepower Gain: +15 at 5,000 RPM.
• Torque Gain: +15 at 5,000 RPM.
• New Rev Limit: Raised to 6,900 RPM.
• Compatibility: Designed for BMW's M20 inline six engine.
• Installation instructions included for your convenience.
• Money-Back Guarantee: Turner offers a 30-day money-back guarantee, demonstrating their confidence in the product's performance. Serviced by ECS Tuning.

Experience the transformation in your BMW's performance and explore newfound power, torque, and overall capabilities while preserving the legendary reliability it's known for. Invest in a Turner Conforti Performance Chip, and unleash the full potential of your BMW.

Horsepower Gain Up To: +22 @ 6,000 RPM
Torque Gain Up To: +20 @ 4,000 RPM
New Rev Limit: 7,000

If you're looking for a significant bump in power you need not look any further than a TMS Performance Chip. Designed to maximize the advantage of premium fuel, Performance Chips safely alter the fuel and timing maps which results in more power and a smoother engine. These chips were tuned by Jim Conforti on the dyno with fantastic results. What you feel is more power starting at 3500 RPM and continuing up to the new rev limit of 7000. There is no downside - only an awakened engine and a car with new life!

Performance software is the key to unlocking the power that BMW left on the table. For the US market the factory software is set for 87 octane fuel. But the engine is capable of producing so much more! We make adjustments to the fuel, ignition, and camshaft timing data at part throttle and full throttle to take advantage of premium 91+ octane fuel. We dial in the settings so that more power is made at all RPM. What you'll notice is more power and torque at wide open throttle and even when driving around town. The engine will run smoother with better throttle response and less hesitation. We keep the factory safeguards in place so there is no long term engine damage or negative side effects. It's not just gaining power back - it's better than when it left the factory!

We're also able to tune for all of the popular M50 engine upgrades -

• lightweight flywheel - adds 100 RPM to idle
• stock E36 M3 camshafts - these work GREAT for producing more top end power. We adjust the maps to take advantage of higher lift and duration
• sport exhaust - additional tuning for cat-back exhausts​

Required Vehicle Info:

1993-1994 E34 525i: no additional information required
1995 E34 525i: production date (MM/YY)
1993-1994 E36 325i: no additional information required
1995 E36 325i: production date (MM/YY)

This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic
1993-1995 E34 BMW 525i

Unleash the full potential of your BMW with the Turner Performance Chip – the easiest solution for adding power and torque. Engineered by BMW tuning legend Jim Conforti, these chips are meticulously designed to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is elevated, and fuel and spark maps are fine-tuned, ensuring your BMW performs beyond factory standards. No compromises here – each Turner Performance Chip is crafted to safely improve performance, maintaining driveability and enhancing responsiveness. Detailed instructions make installation a breeze, typically taking just an hour for enthusiasts with hand tools.

• Dyno-tuned by BMW legend Jim Conforti for optimal performance
• Designed for high-octane (91+) pump gas
• Boosts mid-range torque and high-RPM horsepower
• Fine-tuned fuel and spark maps for enhanced power
• Maintains driveability and improves responsiveness
• Easy installation with detailed instructions included
• Horsepower Gain: +15 @ 5,000 RPM, Torque Gain: +15 @ 5,000 RPM
• New Rev Limit: 6,900 RPM for an exhilarating driving experience
• 30-day money-back guarantee for confidence in your purchase

Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.

Unleash the true potential of your BMW effortlessly with the Turner Performance Chip—the ultimate solution for adding power and torque. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are meticulously designed to maximize the benefits of high-octane (91+) pump gas, elevating mid-range torque and high-RPM horsepower. Experience an optimized driving performance as the chip raises the rev limit and fine-tunes fuel and spark maps, ensuring your BMW outperforms its factory configuration. There's no compromise with the Turner Performance Chip; each chip is engineered for safe performance improvement, maintaining driveability, and enhancing responsiveness. Detailed instructions accompany every chip, making installation a straightforward process, typically taking just an hour for enthusiasts using hand tools.

Turner Motorsport and Jim Conforti, with over 20 years of experience, redefine your BMW's performance through meticulous software tuning. Unlike eBay chips, Turner Performance Chips feature extensively tested fuel & spark maps, maximizing your BMW's potential without risking engine damage or sacrificing driveability. Since 1995, Jim Conforti has been a driving force in fine-tuning the BMW experience, finding more power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti is hailed as the leader in BMW chip tuning—don't settle for imitators; your BMW deserves the best.

The E36 M3, a pinnacle of performance and luxury, takes a leap with the Turner Conforti Performance Chip. Addressing the US-market E36 M3's power disparity with its European counterpart, this chip delivers impressive gains in both horsepower and torque where you need it most.

• Horsepower Gain: +19 @ 5,000 RPM
• Torque Gain: +16 @ 3,500 RPM
• New Rev Limit: 7,000 RPM
• Tuning options for popular aftermarket upgrades available; contact your sales rep for details.
• Easy installation with included instructions.

Turner is so confident in the transformative power, torque, and overall performance of this product that they offer a 30-day money-back guarantee, serviced by ECS Tuning.