Packaged by Turner BMW Brakes & Brake Parts

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
F3X BMW 328 330 428 430 (w/ M Sport Brakes)
F3X BMW 335 340 435 440 (w/ Standard Brakes)
F22/23 BMW 228 230 (w/ M Sport Brakes)
F22/23 BMW M230 M240 (w/ Standard Brakes)

As an E9X M3 owner, do you feel short-changed in the braking department? The next gen M3/M4 got serious Brembo calipers. With a special bracket the front 6-piston calipers can fit the E9X M3 for a bolt-on caliper and rotor upgrade. The rotors in this kit are 382x36mm - 22mm larger and 6mm thicker than the stock E9X rotor (and slightly bigger than the stock M3/M4 disc). The larger front rotors will help manage and dissipate heat better than the smaller stock rotors. And a larger rotor and caliper mean stronger brakes. Testing has shown the brake bias is very close to a stock E9X M3. Upgraded rear rotors are also included to work with the stock rear calipers. These are the blue M3/M4 calipers with the ///M logo.

Front brake specs:

• 382x36mm 2-piece floating rotors - 50% larger surface area and more cooling vanes
• 6-piston Brembo caliper (blue)
• Custom brake caliper bracket to fit the E9X M3 hub
• Multiple pad options
• Stainless brake lines

Rear brake specs:

• 350x24 2-piece floating rotors (same size as stock)
• re-use stock calipers
• Multiple pad options
• Stainless brake lines

Wheel fitment notes:

• 19" wheels required 
• Wheel spacers may also be required depending on wheel design
• Slight bending of front dust shields is requried

*Will not ZCP Wheels* 

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.

Included in this BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

Textar Front & Rear Brake Pads
Zimmerman Front & Rear Rotors
New Front & Rear Wear Sensors
Brand New Set Screws

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front Brake Pads
• Zimmerman Front Rotors
• Febi Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
1999-2006 E46 BMW 323i Touring, 323Ci Convertible, 325i/Ci 328i/Ci

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• Brand New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E46 BMW 325xi

Everything you need for a Genuine front brake repair for your F97 X3 M or F98 X4 M. Includes:

• 2 x Brake Rotors
• Brake Pads
• Silicone Brake Lubricant Compound
• Front Brake Pad Sensor

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW 325ix

This brake package for the E82 135i comes with everything you need to perform a major brake overhaul --

Rotor Options:

• Zimmermann coated rotors
• Genuine BMW Performance Dimpled & Slotted rotors
• ECS 2-piece floating front rotors with BMW Dimpled & Slotted rear rotors

Pad Options:

• OEM pads
• aftermarket dust-less
• street performance

Additional items included:

• Rotor retaining screws
• Front and rear pad wear sensors
• Brake fluid

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our 20+ years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.
 

Brake Package FAQ:
Brake Pad Buying Guide
Brake Rotor Buying Guide

This item fits the following BMWs:
2007-2012 E82 BMW 135i

This brake package for the 2001-2006 BMW E46 M3 ZCP (Competition Package) comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Genuine BMW replacements
Front and rear brake pads - OEM organic, street performance, mixed track/street, or full race
Front and rear pad wear sensors
Brake fluid - DOT4 street or DOT4 racing fluid

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance!

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

This kit is a direct replacement for the standard floating and cross-drilled 345mm rotors in the ZCP Competition Package. This is brake overhaul for the ZCP and will not work as an upgrade for non-ZCP unless the ZCP front caliper brackets are used. We offer the full E46 M3 ZCP brake upgrade on the website here (click).
 

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

Applications:
2004-2006 BMW E46 M3 ZCP (Competition Package)

Restore your BMW's braking system to its original performance with this Packaged by Turner OE Front Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete front brake overhaul, ensuring maximum braking efficiency and safety.

Top Features:

Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough front brake service.

OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance.

High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality.

Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control.

User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process.

Advantages:

Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency.

Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications.

Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system.

Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine.

For a detailed list of included components, please refer to the "Kit Contents" tab.