Search | Turner Motorsport

PRIMA Supercharger Kit (Non-Intercooled) - E46 M3

For SMG Transmissions Only ~ Call in to provide vin before purchase

T#:50899202

Part#: 12-021S

Ships in 10 Business Days

$ 8,906.00 USD

Add to Wish List

Qty

$ 8,906.00 USD

Add to Wish List

Co-developed with Frank Smith of TuningTechFS, the Active Autowerke PRIMA Supercharger Kit delivers a proven entry point into forced induction for the E46 M3. The system is engineered around efficiency, repeatability, and upgrade potential, with a baseline configuration that can grow beyond 500 WHP through available Level 1 and Level 2 packages. PRIMA focuses on clean, practical design. This is a fully bolt-on, non intercooled setup that installs without custom fabrication and can be reverted to stock if required. The modular architecture also allows straightforward progression to higher output configurations. As expected from Active Autowerke, the kit enhances overall performance while preserving the sharp throttle response and balanced character of the S54-powered M3. PRIMA Supercharger Kit Key Features Rotrex C38-92 supercharger assembly Active Autowerke GEN 9 intake manifold plenum Active Autowerke dual blow off valve configuration Active Autowerke green performance filter with cover Alpha N calibration with SIMON 4 interface included High capacity fuel injectors Colder heat range spark plugs Dedicated self contained oil cooling circuit Pre assembled hoses, clamps, and installation hardware Compatible with Level 1 and Level 2 upgrade paths Baseline Dynojet Results Boost: 5.8 PSI Stock Power: 285.4 WHP @ 7500 RPM Stock Torque: 232.36 lb ft @ 5250 RPM Supercharged Power: 426.69 WHP @ 8150 RPM Supercharged Torque: 297.99 lb ft @ 7200 RPM

Show More Show Less

E39 528i 99-00 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2888

Part#: TMS2888

Ships in 3 Business Days

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1999-2000 E39 528i Stage 1 Performance Package
Peak Power Gain: +14hp / +11ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1999-2000 E39 528i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1999-2000 E39 528i sedan (M52tu engine)

Show More Show Less

Vargas One Way Crankcase Breather - Toyota A90/91 Supra

2X Entries Into Our F80 M3 Sweepstakes

T#:51778145

Part#: VTT-SUPRA-BREATH

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

The VTT Billet One-Way Crankcase Breather provides a secondary vent for your A90/A91 Supra, tackling the limitations of the factory PCV system.

Supercharger Kit Level 1 - E46 330 2003+

For model years 2003+ ~ Call in to provide vin before purchase

T#:50899201

Part#: 12-016M45

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 330i with the Active Autowerke Supercharger Kit. Designed to deliver a significant horsepower increase without sacrificing daily usability, this system operates safely on 91 to 93 octane pump fuel and integrates directly with the factory ECU. Active Autowerke’s dyno developed calibration manages ignition timing, fueling, VANOS function, and rev limits through the stock DME for consistent, predictable results. Power delivery remains smooth and repeatable with OEM like drivability, and the system can be returned to stock configuration if needed. The included self contained oil cooling circuit keeps installation straightforward without modifying the factory oil system. For E46 owners seeking a complete, well engineered bolt on solution, this kit offers substantial, reliable gains. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount oil cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum tubing for improved flow Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete mounting hardware, plumbing, hoses, and clamps Illustrated installation manual and guide 1 year warranty with technical support Performance Specifications Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost Level: 8.0 PSI

Show More Show Less

Supercharger Kit Level 1 - E46 3330i

For model years 1999-2002 ~ Call in to provide vin before purchase

T#:50899198

Part#: 12-016M430

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 330i with the Active Autowerke Supercharger Kit. Designed to deliver a significant horsepower increase without sacrificing daily usability, this system operates safely on 91 to 93 octane pump fuel and integrates directly with the factory ECU. Active Autowerke’s dyno developed calibration manages ignition timing, fueling, VANOS function, and rev limits through the stock DME for consistent, predictable results. Power delivery remains smooth and repeatable with OEM like drivability, and the system can be returned to stock configuration if needed. The included self contained oil cooling circuit keeps installation straightforward without modifying the factory oil system. For E46 owners seeking a complete, well engineered bolt on solution, this kit offers substantial, reliable gains. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount oil cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum tubing for improved flow Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete mounting hardware, plumbing, hoses, and clamps Illustrated installation manual and guide 1 year warranty with technical support Performance Specifications Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost Level: 8.0 PSI

Show More Show Less

Intake Manifold Gasket - Priced Each

T#:593834

Part#: 11611730787

Ships in 8 Business Days

$ 1.47 USD

Add to Wish List

Qty

$ 1.47 USD

Add to Wish List

This gasket is used to seal the intake manifold to the cylinder head. 4 Required for a complete replacement.

Turner Motorsport M50 Manifold Fuel Rail Cover

10X Entries Into Our F80 M3 Sweepstakes

T#:303995

Part#: TEN3680FRC

Ships in 1 day

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Turner Motorsport has spent the last two decades striving for ultimate performance on the racetrack, and transferring the knowledge gained from winning races onto the street. Their line of BMW performance parts combines, high quality, great value, and most importantly, superior performance that will allow you to dial in your ride to suit your driving style and allow your BMW to live up to its full potential. This modified fuel rail cover will fit the M50 manifold, providing a completed look to your engine bay.

Show More Show Less

Turner Motorsport Valve Cover Stud (11121718856) - Priced Each ...

10X Entries Into Our F80 M3 Sweepstakes

T#:55317643

Part#: 059043LA03

In Stock

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

This M7/6x29.5 threaded stud is used for securing the valve cover to the cylinder head on all M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines. Despite this crucial role in engine sealing and construction, BMW decided to discontinue this vital factory part in 2023. Recognizing the gap left by the discontinued factory hardware, our team of BMW enthusiasts reverse-engineered the original part—improving its materials and finish to bring a higher-quality, long-lasting solution to the market. Manufactured from high-strength Grade 8.8 steel and finished with a protective zinc coating, this upgraded stud delivers exceptional durability, reliable torque retention, and exceptional corrosion resistance under the hood.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Belt - N55 F Chassis ...

10X Entries Into Our F80 M3 Sweepstakes

T#:5858461

Part#: 8PK1390

In Stock

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Replaces BMW # 11287628661 Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.

Show More Show Less

Accessory Belt Tensioner Assembly

10X Entries Into Our F80 M3 Sweepstakes

T#:32350851

Part#: 11288604266

In Stock

Sale - Save 7% $ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 48.59 USD

Add to Wish List

Qty

Sale - Save 7%

$ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 48.59 USD

Add to Wish List

Oil Pan Gasket

10X Entries Into Our F80 M3 Sweepstakes

T#:26305093

Part#: 11137548031

In Stock

Sale - Save 19% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.99 USD

Add to Wish List

Deflection Pulley

10X Entries Into Our F80 M3 Sweepstakes

T#:32450136

Part#: 11288673720

In Stock

Sale - Save 10% $ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.19 USD

Add to Wish List

Accessory Belt Tensioner Assembly

10X Entries Into Our F80 M3 Sweepstakes

T#:32350878

Part#: 11287594969

In Stock

Sale - Save 15% $ 47.99

This product was last offered at the strikethrough price on
06-18-2026

$ 40.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 47.99

This product was last offered at the strikethrough price on
06-18-2026

$ 40.79 USD

Add to Wish List

B58 Engine Cover - F30, F32, F34, F36 - 340, 440

10X Entries Into Our F80 M3 Sweepstakes

T#:16375130

Part#: 003239LB01

In Stock

Sale - Save 3% $ 463.99

This product was last offered at the strikethrough price on
06-14-2026

$ 449.55 USD

Add to Wish List

Qty

Sale - Save 3%

$ 463.99

This product was last offered at the strikethrough price on
06-14-2026

$ 449.55 USD

Add to Wish List

At Turner we love the 340's and we love carbon fiber. The answer was clear we need to combine the two and the result is amazing. Our carbon engine cover looks so good on the B58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Simply remove your factory engine cover and transfer the factory emblem on to your new carbon fiber engine cover and check one modification off the list!

Our Turner B58 Carbon Engine cover starts with mold of the original engine cover to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out our other incredible carbon fiber pieces we offers to enhance your F30 340!.

Show More Show Less

Crankcase Ventilation Valve

10X Entries Into Our F80 M3 Sweepstakes

T#:48125821

Part#: 11127803790

Ships on Feb 18, 2027

Sale - Save 24% $ 15.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.23 USD

Add to Wish List

Qty

Sale - Save 24%

$ 15.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.23 USD

Add to Wish List

Ensure your BMW engine runs clean and efficiently with this Crankcase Breather Valve Diaphragm Spring and Cap (11127803790).

A direct-fit replacement for the original BMW breather (OE 11127803790 / 11-12-7-803-790), this valve maintains proper crankcase pressure, reduces oil buildup, and promotes smooth engine performance.

Constructed from durable, high-quality materials and engineered to OEM specifications, it installs easily without any modifications.

Ideal for maintenance, resolving crankcase pressure issues, or restoring your engine’s ventilation system, this breather valve delivers reliable performance and helps protect your BMW for years to come.

Show More Show Less

Bremmen Parts O-ring - E36, E38, E39, Z3

10X Entries Into Our F80 M3 Sweepstakes

T#:594451

Part#: 11531703848

Ships in 1 day

Sale - Save 20% $ 2.74

This product was last offered at the strikethrough price on
05-03-2026

$ 2.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 2.74

This product was last offered at the strikethrough price on
05-03-2026

$ 2.19 USD

Add to Wish List

18.2x3. Used in the cooling system

O-Ring - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:554449

Part#: 11361403325

In Stock

Sale - Save 25% $ 2.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 2.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.24 USD

Add to Wish List

Bremmen Parts Crankcase Vent Pipe - Cylinders 5-8 - E70, E71, F01, F0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1195924

Part#: 11157575641

Ships in 1 day

Sale - Save 10% $ 63.23

This product was last offered at the strikethrough price on
05-03-2026

$ 56.91 USD

Add to Wish List

Qty

Sale - Save 10%

$ 63.23

This product was last offered at the strikethrough price on
05-03-2026

$ 56.91 USD

Add to Wish List

Replace your damaged crank vent pipe

Adjustable Hose Clamp - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:378848

Part#: 25-40/9

In Stock

$ 3.11 USD

Add to Wish List

Qty

$ 3.11 USD

Add to Wish List

For versatile hose fitting solutions, look no further than the Adjustable Hose Clamp. This essential tool offers a secure and adjustable grip for various hose sizes, ensuring leak-free connections in automotive, plumbing, and industrial applications. With its durable construction and user-friendly design, the Adjustable Hose Clamp is a must-have for any toolbox.

Provides secure and adjustable grip
Suitable for various hose sizes
Ensures leak-free connections
Ideal for automotive, plumbing, and industrial applications

Show More Show Less

Bremmen Parts O-Ring

10X Entries Into Our F80 M3 Sweepstakes

T#:1195925

Part#: 11427548322

Ships in 1 day

Sale - Save 20% $ 8.15

This product was last offered at the strikethrough price on
05-03-2026

$ 6.52 USD

Add to Wish List

Qty

Sale - Save 20%

$ 8.15

This product was last offered at the strikethrough price on
05-03-2026

$ 6.52 USD

Add to Wish List

17x3

Genuine BMW Pulse Generator/Crankshaft Position Sensor - 12141726065 ...

T#:185064

Part#: 12141726065

In Stock

3% off MSRP $ 249.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 242.99 USD

Add to Wish List

Qty

3% off MSRP

$ 249.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 242.99 USD

Add to Wish List

The Crankshaft Position Sensor measures the speed and position of the crankshaft to determine the proper fuel and timing requirement for the best performance.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Pulse Generator
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M50,S50

Show More Show Less

Mahle OEM Oil Filter for E46 M3, MZ3, MZ4 (S50 3.0L, S52 3.2L, S54 3....

T#:4405

Part#: 11427833769ML

Ships in 2 Business Days

$ 16.99

This product was last offered at the strikethrough price on
07-23-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

This is the replacement OEM oil filter kit for the S54 engine, as used in the E46 M3, Z4 M Roadster and M Coupe, as well as the 2001-2002 MZ3 M Roadster/Coupe (with S54 engine). This is the complete oil filter kit - filter, large o-ring for filter housing cover, small o-ring for bolt seal, flat washer for bolt, and copper seal ring for the drain bolt. It's everything you would need to complete an oil change - minus the Castrol 10W60 oil of course, which we sell at a great price. This kit is manufactured by Mahle - the original supplier to BMW for the 11427833769 BMW filter (factory filters come with the Mahle part number OX 187 printed on the cap).

Why Mahle over Mann? In the past we have sold a few different oil filters for the E46 M3 and S54 engines. But Mahle is the true OEM supplier for this part number. It fits perfectly and is the exact replacement part at nearly the same price as the slightly different Mann filter (and less than the factory BMW filter). For more detail, click here.

This filter fits the following BMWs:
2001-2006 E46 M3
2001-2002 MZ3 - M Roadster & M Coupe (S54)
2006-2008 MZ4 - M Roadster & M Coupe

Show More Show Less

Upgraded Fuel Pump Control Module - Dual Ball Bearing Fan - EKPM3 ...

T#:28304531

Part#: EKP-HW06-F-SF

In Stock

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Arc Terminator now offers upgraded EKMP3 Fuel Pump Control Modules featuring a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low-pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low-pressure fuel pump such as a Walbro 525lph. How does the integrated automatic cooling work? The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half-bridge IC. When the half-bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power. Can I run more than 1 low-pressure fuel pump off of this module? No. We do not recommend that you use more than one low-pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 12 gauge, which is not rated for the type of power demands that two low-pressure fuel pumps would require.

Show More Show Less

Genuine BMW Lower Connecting Rod Bearing - E39 M5, Z8

T#:32981

Part#: 11241407492

Ships in 1 day

$ 76.29 USD

Add to Wish List

Qty

$ 76.29 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 49,00mm(0)
This item fits the following BMW Chassis:
E39 M5,E39

Fits BMW Engines including:
M62,S62

Mann Engine Oil Filter/ B58 & A90 MKV

T#:557739

Part#: 11428583898

In Stock

$ 27.52

This product was last offered at the strikethrough price on
07-08-2026

$ 17.38 USD

Add to Wish List

Qty

$ 17.38 USD

Add to Wish List

Keep your oil clean with a new filter

Genuine BMW Upper Connecting Rod Bearing - E39 M5, Z8

T#:12932

Part#: 11241407493

Ships in 1 day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Blue - 49,00mm(0)
This item fits the following BMW Chassis:
E39 M5,E39

Fits BMW Engines including:
M62,S62

Oil Filter

5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:43885719

Part#: 11427837997

Ships in 1-3 days

$ 17.99

This product was last offered at the strikethrough price on
08-14-2026

$ 15.60 USD

Add to Wish List

Qty

$ 15.60 USD

Add to Wish List

SEAL HIGH-PRESSURE PUMP

T#:628169

Part#: 11128093559

Ships in 1 day

13% off MSRP $ 52.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Qty

13% off MSRP

$ 52.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Genuine BMW Cap Nut M7 - 11127838075 - E46,E85,E46 M3,E85 Z4M ...

T#:22191

Part#: 11127838075

In Stock

3% off MSRP $ 12.06

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.71 USD

Add to Wish List

Qty

3% off MSRP

$ 12.06

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.71 USD

Add to Wish List

Genuine BMW Cap Nut - M7
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Genuine BMW Connecting Rod Bolt - 11241405890 - E39 M5

T#:12931

Part#: 11241405890

Ships in 1 day

1% off MSRP $ 13.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.76 USD

Add to Wish List

Qty

1% off MSRP

$ 13.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.76 USD

Add to Wish List

OE replacement connecting rod bolt. Recommended to replace any time these have to removed.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMW Chassis:
E39 M5, E52 Z8

Fits BMW Engines including:
M62,S62 S50

Show More Show Less

Genuine BMW Stud Bolt - 07129908134 - E30,E34

T#:19606

Part#: 07129908134

Ships in 1 day

$ 4.00 USD

Add to Wish List

Qty

$ 4.00 USD

Add to Wish List

Genuine BMW Stud Bolt -
This item fits the following BMW Chassis:
E30,E34

Performance S65 BE Bearings Rod Bearing & Rod Bolt Lvl2 Kit- E9X M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:13463763

Part#: 11247838088DBEKT

In Stock

$ 974.99 USD

Add to Wish List

Qty

$ 974.99 USD

Add to Wish List

BE Bearings, in collaboration with Clevite, a leading OE bearing manufacturer, has revolutionized rod bearings for your peace of mind. Our redesigned bearings offer enhanced clearance and feature a shift from the original tin-aluminum composition to lead-copper. This upgrade incorporates the cutting-edge Clevite Tri-Metal design and boasts a Tri-Armor™ coating, ensuring superior lubrication for wear prevention. Moreover, these softer bearings are gentler on your engine and more tolerant of foreign particles suspended in your oil. Additionally, this upgrade enables precise wear assessment through oil testing. Our comprehensive kit includes: Upper and lower BE Bearings upgraded rod bearings Essential hardware Oil filter Oil pan gasket RedLine assembly lube Secure your BMW E9X M3's engine with our rod bearing kit and enjoy peace of mind on the road.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N55 F-Chas...

10X Entries Into Our F80 M3 Sweepstakes

T#:22097553

Part#: 11287628661TKT

In Stock

Sale - Save 23% $ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD

Add to Wish List

Qty

Sale - Save 23%

$ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Mann Oil Filter Kit - E9X M3 S65

T#:2669

Part#: 11427837997

In Stock

$ 28.99

This product was last offered at the strikethrough price on
03-02-2026

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

This is an OEM Mann oil filter for the E9X M3 with S65 engine. Includes the filter, seal, and o-ring.

Bearing Shell Yellow - E31, E32, E34, E38, E39, E52, E53

T#:32497

Part#: 11211725908

Ships in 1 day

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 70,00Mm(0)
This item fits the following BMW Chassis:
E39 M5,E34,E38,E39,E53 X5 X5

Fits BMW Engines including:
M60,M62,S62

Show More Show Less

Oil Pan Gasket - With Bolts

10X Entries Into Our F80 M3 Sweepstakes

T#:5403247

Part#: 11132210959TMSKT

In Stock

Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD

Add to Wish List

Qty

Sale - Save 3%

$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD

Add to Wish List

Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Air Conditioner Serpentine Belt - E46 M3

We Price Match - Give Us A Call or Chat!

T#:1282

Part#: 11287830946

Ships in 1 day

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

This belt drives the air conditioning compressor for the AC system. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones. This belt fits 2001-2006 M3.

Show More Show Less

Genuine BMW Timing Chain Cover Gasket - E9X M3 S65

T#:31644

Part#: 11127838162

Ships in 1 day

24% off MSRP $ 100.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 76.29 USD

Add to Wish List

Qty

24% off MSRP

$ 100.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 76.29 USD

Add to Wish List

Timing chain cover gasket fits left or right chain cover.

Genuine BMW Hex Bolt M10X92 - 11111740345 - E39,E46,E53,E83,E85 ...

T#:30712

Part#: 11111740345

Ships in 1 day

9% off MSRP $ 13.04

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.89 USD

Add to Wish List

Qty

9% off MSRP

$ 13.04

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.89 USD

Add to Wish List

Genuine BMW Hex Bolt - M10X92
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56

Engine Hydraulic Valve Lifter - BMW E36 328i, M3, E46, E39, - M52 M54...

T#:14514

Part#: 11321748884

Ships in 4 Business Days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Stock OEM hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe

Show More Show Less

Rocker Arm Eccentric - M10, M20, M30 engines

T#:6784

Part#: 11331744354

Ships in 1 day

$ 6.43 USD

Add to Wish List

Qty

$ 6.43 USD

Add to Wish List

When replacing rocker arms or camshafts we strongly recommend replacing the rocker arm eccentrics. They wear over time and impact the ability to adjust the valve clearance. For BMW M10, M20 and M30 engines.Sold individually.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i 323i
1984-1985 E30 BMW 318i
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 528e 533i 535i 535is
1989-1990 E34 BMW 525i
1989-1993 E34 BMW 535i
1982-1989 E24 BMW 633csi 635csi
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il

Show More Show Less

Genuine BMW Valve Spring Set - E46 Z3 Z4

T#:34101

Part#: 11317830890

Ships in 1 day

$ 16.47 USD

Add to Wish List

Qty

$ 16.47 USD

Add to Wish List

Genuine BMW Set Valve Spring Yellow/Yellow
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Show More Show Less

Victor Reinz Throttle Housing Gasket - Throttle Housing to Intake Man...

T#:596633

Part#: 11611716174

Ships in 1-2 days

$ 9.99

This product was last offered at the strikethrough price on
08-26-2026

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Genuine BMW O-Ring - 13417830384 - E46,E85,E46 M3,E85 Z4M

T#:13116

Part#: 13417830384

Ships in 4 Business Days

$ 2.79 USD

Add to Wish List

Qty

$ 2.79 USD

Add to Wish List

Genuine BMW O-Ring
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Performance S65 BE Bearings Rod Bearing & Rod Bolt Lvl3 Kit- E9X M3 (...

10X Entries Into Our F80 M3 Sweepstakes

T#:5403237

Part#: 11247838088TMSKT

In Stock

$ 1,118.99 USD

Add to Wish List

Qty

$ 1,118.99 USD

Add to Wish List

Includes BE Bearings Rod Bearings, BE Bearings Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 oil, Genuine BMW Hardware and Liqui Moly LM 48 Assembly Lube - 50g

AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...

T#:42200953

Part#: 13517616170RKT

Back Ordered

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.

Show More Show Less

Crank Seal Guard & Performance Kevlar-Reinforced Accessory Belt - N55...

T#:37419774

Part#: 049453LA01-02KT6

In Stock

Sale - Save 46% $ 180.99

This product was last offered at the strikethrough price on
05-05-2026

$ 97.62 USD

Add to Wish List

Qty

Sale - Save 46%

$ 180.99

This product was last offered at the strikethrough price on
05-05-2026

$ 97.62 USD

Add to Wish List

Enthusiast Bundle: Turner Motorsport Crank Seal Guard with ECS Kevlar-Reinforced Belt

Protect your N5X/S55 from catastrophic failure with this must-have upgrade!

The Turner Motorsport Crank Seal Guard is meticulously designed to safeguard your engine’s crank seal from potential damage caused by a shredded serpentine belt. Oil or coolant leaks can lead to accessory belt slippage, fraying, and tearing, which can send belt debris behind the harmonic balancer and into the crank seal, risking serious engine damage.

Key Benefits:

Shields crank seal from accessory belt debris, preventing engine failure Custom-fit for N54/N55/S55 engines Zinc-coated fasteners for superior corrosion resistance Durable 6061 billet aluminum construction, with Turner blue anodized finish for added strength and style Cutting-Edge Design:

Designed using FARO laser scanning and Solidworks CAD for precision fitment Rigorous testing ensures reliable protection in all conditions Easily installs with 2 securing bolts torqued to 20Nm ECS Performance Kevlar-Reinforced Accessory Belt:

Reduced elongation for consistent performance over time Enhanced shock and impact resistance Superior oil and temperature resistance tested to JASO E 109-94 and SAE J2432 standards Ensure long-term engine health and peace of mind with the Turner Motorsport Crank Seal Guard and ECS Kevlar-Reinforced Accessory Belt combo. Prevent the "when, not if" risk of belt-related engine failure today!

Show More Show Less

Genuine BMW Rocker Arm - M20

T#:367624

Part#: 11331271429

Ships in 1 day

$ 59.97 USD

Add to Wish List

Qty

$ 59.97 USD

Add to Wish List

For optimal valve train performance in your BMW, replace old rockers when shaft/rocker clearance exceeds specifications. When installing a new cam or rocker shafts, it's recommended to re-machine rocker pads or replace rockers to ensure maximum valve train life. The kit includes rockers and provides benefits such as: