Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.
The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.
Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.
The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.
All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.
Specs and Features:
This product was last offered at the strikethrough price on
10-20-2026
Factory Pre-set Damping
The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
This is the ideal coil over kit for an MZ3 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.
Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.
Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
Lifetime warranty!
FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states.
This item fits the following BMWs:
1998-2002 Z3 BMW Z3 M Roadster
H&R PCS Street Performance Coil Overs are engineered for the street. Designed for the enthusiast who desires a manual shock damping feature, these state-of-the-art inverted mono-tube dampers feature adjustable ride height and precision external adjustment knobs allowing simultaneous adjustment of rebound and compression damping. The bias between rebound and compression is perfectly balanced and has been designed by H&R engineers to eliminate any undesirable settings and guesswork. Unlike traditional twin-tube shock absorbers, H&Rs mono-tube gas shock absorbers eliminate foaming of the damper oil even under extreme conditions and are lighter weight which reduces un-sprung weight.
H&R PCS Street Performance Coil Overs for E36 3 series will provide a lowering range of approximately 1.0 to 1.9 inches front and 1.0 to 1.6 inches rear. Lowering your BMW with H&R improves handling and provides that cool H&R stance.
SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING
Height adjustment range:
F: -1.0-1.9"
R: -1.0-1.6"
This coilover kit fits the following BMWs:
6/1992-1998 E36 BMW 323is 325i 325is 328i 328is
This product was last offered at the strikethrough price on
10-20-2026
Adjustable Rebound Damping
This system intended for the experienced E36 3 series compact driver who wants to determine the individual lowering of his vehicle, and also wants to make setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll of the car and therefore the driving pleasure can be adapted to your requirements.
When using original tires, wheel offset spacers may be required.
This item fits the following BMWs:
1994-1998 E36 BMW 318ti
This product was last offered at the strikethrough price on
10-21-2026
This product was last offered at the strikethrough price on
10-21-2026
Adjustable Rebound & Compression Damping
Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!
Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.
Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials.
Lifetime warranty!
This item fits the following BMWs:
2017+ G30 BMW 540i 530i
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-29-2026
This product was last offered at the strikethrough price on
10-20-2026
The KW V2 Coilover Kit is designed for the experienced driver looking to finely tune their vehicle's performance. Ideal for the Mini R56 Cooper S and JCW models, this system allows for individual lowering and precise setup adjustments, enhancing both handling and driving pleasure.
This product was last offered at the strikethrough price on
10-20-2026
This product was last offered at the strikethrough price on
10-21-2026