• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

• 60MM, 75MM, 82MM, OR 90MM OVERALL LENGTH
• EASY INSTALL WITH ALLEN SOCKET
• CERTIFIED ISO/TS 16949 AND ISO 9001 BY TUV
• MANUFACTURED IN EUROPE
• BLACK M-PHOSPHATE COATING
• CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
• STUD FOR MIXED STREET/TRACK USE

• Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
  
  Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
  
  Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.
   Turner Bullet Nose Wheel Stud Features:

• Black phosphorous corrosion resistant coating
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel
• Installation Instructions
  Click here for installation instructions and more information.
  
  
  
  Sold per stud.

Wheel Stud Conversion Kit - Full Set: Enhance Your BMW's Performance

• Facilitates quick and easy wheel changes
• Offers a secure and reliable wheel mounting solution
• Minimizes the risk of lug bolt stripping
• Compatible with various BMW models

Upgrade your BMW's performance with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit is designed to facilitate quick and easy wheel changes, offering a secure and reliable wheel mounting solution. By minimizing the risk of lug bolt stripping, it ensures a safer driving experience. Plus, it is compatible with various BMW models, providing versatility and ease of installation.

Enhance your BMW's wheel changing process with a stud conversion kit, facilitating faster and more convenient wheel swaps. This kit includes 20 Conical Seat Lug Nuts and 20 78mm Wheel Studs, offering a permanent wheel-hanging solution that saves time and hassle. By screwing in the provided studs, you'll be ready to go without complexities.

Product Benefits:

• Permanent wheel-hanging solution
• Saves time and hassle during wheel changes
• Versatile use with spacers of up to 30mm
• Facilitates easier wheel installation
• Reduces wear on wheel hubs

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.

Revamp Your BMW's Performance with the Wheel Stud Conversion Kit - Full Set

• Boosts wheel mounting reliability
• Simplifies wheel replacements and upkeep
• Compatible with aftermarket wheel options
• Minimizes the risk of stripped lug bolts

Elevate your BMW's performance with the Wheel Stud Conversion Kit - Full Set. This all-inclusive kit provides a robust solution for wheel mounting, enhancing overall reliability. It streamlines the process of replacing wheels and conducting maintenance, ensuring a seamless experience. Furthermore, it supports compatibility with aftermarket wheel selections, offering versatility for customization. By mitigating the risk of stripped lug bolts, this kit also enhances safety on the road.

Upgrade Your BMW's Wheel System with a Stud Conversion Kit

Upgrade your BMW's wheel system with a stud conversion kit, designed to facilitate quicker and easier wheel changes. This kit comprises Conical Seat Lug Nuts (10) and 70mm Wheel Studs (10), ensuring hassle-free and time-saving wheel swaps. Simply install the provided studs, granting permanent wheel hangers for effortless wheel mounting.

Key Benefits:

• Permanent wheel hangers for simplified and quicker wheel changes
• Enhanced confidence in wheel-to-hub contact, ideal for racing purposes
• Accommodates various spacer widths, eliminating the need for custom lengths
• Facilitates easier wheel installation, using studs as wheel hangers while nuts secure the wheel
• Reduces wear on wheel hubs, enhancing longevity
• Streamlines tire changes with studs remaining in the hub for swift removal/installation

Upgrade your BMW's wheel setup effortlessly and ensure quicker wheel changes with a stud conversion kit, offering improved wheel-to-hub contact, ease of installation, and reduced wear on wheel hubs.

Wheel Stud Conversion Kit - Full Set: Upgrade Your BMW's Wheels

• Allows for easier wheel installation and removal
• Provides a more secure wheel mounting solution
• Eliminates the risk of stripped lug nuts
• Enhances the appearance of your BMW's wheels

Upgrade your BMW's wheels with the Wheel Stud Conversion Kit - Full Set. This kit includes everything you need to convert your lug bolts to wheel studs, allowing for easier wheel installation and removal. Additionally, it provides a more secure wheel mounting solution, reducing the risk of stripped lug nuts. With this conversion kit, you can also enhance the appearance of your BMW's wheels for a more aggressive and sporty look.

MINI F56 Wheel Stud Conversion Kit - Full Set is designed to upgrade the performance and reliability of wheel mounting on the MINI F56. This comprehensive kit simplifies wheel changes and maintenance, making the process more efficient. It enhances wheel mounting reliability and is fully compatible with aftermarket wheels, providing greater customization options. The conversion kit also reduces the risk of stripped lug bolts, ensuring safer and more reliable driving.

• Enhances wheel mounting reliability for improved performance
• Simplifies wheel changes and maintenance for ease of use
• Compatible with aftermarket wheels for customization
• Reduces the risk of stripped lug bolts, enhancing safety
• Provides a reliable solution for secure wheel mounting

Enhance your wheel changing experience with a stud conversion kit tailored for your BMW, designed to streamline and expedite the process. The kit comprises:

• Conical Seat Lug Nuts (10)
• 55mm Wheel Studs (10)

This conversion provides permanent wheel hangers, minimizing time and hassle. Simply screw in the provided studs for quick and easy installation.

Why Choose Wheel Studs Over Wheel Bolts?

• Added Confidence: Some racing regulations require wheel studs for improved wheel-to-hub contact, ensuring additional security.
• Versatility for Spacers: Wheel studs accommodate various spacer widths in one application, eliminating the need for custom bolt lengths with different spacer sizes.
• Ease of Installation: Wheel studs simplify the wheel installation process while the nuts secure the wheels in place.
• Reduced Wear: Wheel studs in the hub reduce wear on wheel hubs, compared to frequently removing and installing wheel bolts, enhancing longevity.
• Quick Tire Changes: Wheel studs facilitate swift and effortless tire changes or removal.

*Note: Apply thread-locking compound during installation and torque studs to 15Nm. These studs support spacers up to 10mm in size.*

Enhance the wheel installation process of your Mini F5X or F6X with the MINI F5X F6X Wheel Stud Conversion Kit - Full Set. This comprehensive kit includes high-quality wheel studs, providing a more secure and reliable mounting method compared to traditional wheel bolts. Engineered specifically for Mini F5X and F6X models, this full set kit offers improved convenience and ease of use during wheel changes. Upgrade your Mini with this premium wheel stud conversion kit.

• Provides a more secure and reliable mounting method
• Engineered specifically for Mini F5X and F6X models
• Improved convenience and ease of use during wheel changes
• Prevents wheel bolt stripping for enhanced safety

Wheel Stud Conversion Kit - Full Set: Upgrade Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade your BMW's performance with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.

Wheel Stud Conversion Kit - Full Set: Enhance Your BMW's Performance

• Provides a stronger and more reliable wheel mounting solution
• Simplifies wheel changes and maintenance
• Allows for the use of aftermarket wheels with different bolt patterns
• Improves safety by eliminating the risk of stripped lug bolts

Upgrade your BMW's performance with the Wheel Stud Conversion Kit - Full Set. This kit provides a stronger and more reliable wheel mounting solution compared to traditional lug bolts. It simplifies wheel changes and maintenance by eliminating the need for aligning lug bolts with the wheel holes. Additionally, it allows for the use of aftermarket wheels with different bolt patterns, giving you more options for customization. By converting to wheel studs, you also improve safety by reducing the risk of stripped lug bolts, ensuring a secure connection between the wheel and the hub.

• Improved wheel fitment for a secure and precise connection
• Enhanced safety during high-performance driving
• High-quality materials ensure long-lasting durability
• Easy installation process for hassle-free customization

Upgrade your BMW's wheel setup with the BMW E21 E30 Wheel Stud Conversion Kit - full set. This comprehensive kit allows you to convert your wheel bolts to wheel studs, offering enhanced convenience and security. With easy installation and durable construction, this kit is a must-have for any BMW enthusiast.

• Converts wheel bolts to wheel studs for improved convenience
• Provides enhanced security for your wheels
• Easy installation process
• Durable construction ensures long-lasting performance

Enhance Your BMW's Performance with Titanium Conical Seat Wheel Bolt - 14x1.25x35mm - Set Of 20

• Lightweight titanium construction reduces unsprung weight
• Corrosion-resistant for long-lasting durability
• Conical seat design ensures optimal wheel fitment
• Set of 20 bolts for complete wheel installation

Elevate your BMW's performance with the Titanium Conical Seat Wheel Bolt - 14x1.25x35mm - Set Of 20. Crafted from lightweight titanium, these bolts reduce unsprung weight, enhancing agility and responsiveness. Their corrosion-resistant properties ensure long-lasting durability, even in harsh driving conditions. The conical seat design provides optimal wheel fitment, promoting safety and stability. With a set of 20 bolts included, this kit is perfect for complete wheel installation.