This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Boost airflow and unleash a deeper induction sound to rekindle the excitement of driving your BMW E39 530i.
The Luft-Technik Intake System from ECS Tuning is purpose-built for M54-powered 530i models, offering a performance upgrade that overcomes the restrictive factory airbox while maintaining a precise, factory-like fit. ECS Tuning engineered this system around the unique mounting geometry of the E39 chassis, ensuring an effortless bolt-on installation that integrates seamlessly with OEM components.
This performance intake features a high-flow conical air filter housed in a powder-coated aluminum heat shield, designed to seal against the hood and make full use of the factory inlet ducting. By drawing in cooler outside air, the system helps reduce intake temperatures for denser combustion and improved efficiency. A reinforced silicone intake elbow and a precision-engineered MAF housing keep the stock sensor in its proper location while smoothing airflow and reducing turbulence.
The results are immediately noticeable: quicker throttle response, a throatier intake growl, and a cleaner, performance-focused look under the hood. Built with premium materials such as stainless-steel hardware and heat-resistant silicone, ECS Tuning’s Luft-Technik Intake delivers both durability and long-term performance.
For BMW E39 530i drivers who want OE-level fitment with the benefits of sharper response, enhanced induction noise, and improved airflow, the Luft-Technik Intake by ECS Tuning is a must-have upgrade.
Key features:
21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted air flow for maximum induction noise.
The heat shield is designed to fit the E39 chassis perfectly, utilizing factory mounting locations, and creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains factory MAF
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:
Specifically engineered to work with utilizing that maximum air space and retaining the OEM cold air inlet. Mounts to the factory frame rail, no modification required.
Tailored to the M54B30 found in the 5-series chassis.
Kit Contents:
Heat Shield
Silicone Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
Hi-flow ECS Conical Air Filter
E39 Specific Heat Shield Mount
Hardware for installation
Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.
This product was last offered at the strikethrough price on
03-26-2026
This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!
K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.
Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!
With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.
Key benefits:
Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:
Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet
"Oil-Free" ProDry S Filter
This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp, torque by 10 lb/ft, improving acceleration as well as throttle response.
10hp max gain, 10 lb/ft torque max gain
Clickhere for installation instructions.
OEM S14 mass airflow sensor remanufactured by BMW.
Includes $171.00 refundable core charge.
This item fits the following BMWs:
1988-1991 E30 BMW M3
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-14-2026
This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!
K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!
Does not meet CARB emissions standards and cannot be sold to residents of California.
This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder denser air. Although most of the Injen RD series are a one-piece design several are two-piece designs due to the mass air flow meters. Every Injen RD system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty.
In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.
Features:
Polished tubing
+9.6hp
Kit Includes:
SuperNano Dry Web Dry Filter
Mounting hardware
Instructions
This part fits the following BMWs:
1999-2001 E46 323i 325i 328i
BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 21% and lowered the intake air temperatures.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection.
5" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory.
TIG-Welded:
100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.
Pressure Tested:
The BladeRunner Intercooler is test pressure rated at 200psi.
Cold Side Tube:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion. Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.
Perfect Fit:
Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.
Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (turbo) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (turbo) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20
Note: This intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure. Replace your leaking pressure pipe and stop loosing boost.
Product Features and Specifications:
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
08-13-2026
Mass Air Flow Sensor for BMW is a crucial component in maintaining the perfect air-fuel ratio for peak engine performance. Available at Turner Motorsport, this sensor accurately measures the volume of air entering the engine, allowing the ECU to optimize fuel injection for enhanced combustion efficiency. Engineered to meet OEM specifications, the Mass Air Flow Sensor ensures reliable performance, smoother acceleration, and improved fuel economy for BMW drivers.
For BMW owners seeking to maintain or enhance engine performance, Turner Motorsport offers the high-quality Mass Air Flow Sensor for a smoother, more efficient driving experience.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This fully TIG-welded bar & plate design intercooler from aFe is 25% larger than stock, outflowing the factory intercooler and tubes by 21% and substantially lowering intake temperatures. Intercooler and tubes bolt into place with factory-style connections.
Fits the Following BMWs:
F30 335i N55 automatic transmission only
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This fully TIG-welded bar & plate design intercooler from aFe is 25% larger than stock, outflowing the factory intercooler and tubes by 21% and substantially lowering intake temperatures. Intercooler and tubes bolt into place with factory-style connections.
Fits the Following BMWs:
E90 E92 E93 335i N55
