BMW Engine Parts

This set of OEM gaskets covers everything you might need when re-sealing the bottom-end of the E30 M3's S14 engine. Using a complete gasket set will save you time and money if you have the engine out of the car and are performing any major repairs with the oil pan and timing covers off the motor. This is the correct S14 bottom-end gasket set, not a re-packaged M10 kit.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time.

Complete Parts List

(click to expand)

BMW p/nQtyDescription

071199063282large timing rail lower seal, 10x2

071199631303engine block plug gasket ring, A12x15.5

071199631511oil drain plug gasket ring, A12x17

071199632002block coolant drain gasket ring, A14x18

111317279741upper oil pan gasket

111317279831lower oil pan gasket

111413083421front crankshaft shaft seal, 44x60x10

111413126161timing cover gasket, left

111413126171timing cover gasket, right

111417279751rear main seal cover gasket

111422495331rear main seal, 90x110x12

114112504212oil pump hose o-ring

114213126071oil filter housing gasket

115113096921water pump profile gasket

126112771291oil sender gasket ring, 40x4

This item fits the following BMWs:
1987-1992 E30 BMW M3 2.3L or 2.5L conversion

The head gasket is exposed to high pressure and heat for extremely long periods of time. Over a long period of time, these may develop a slight oil leak and must be replaced ASAP to prevent damage to the engine. It should also be replaced any time that the engine head is removed to ensure the best seal possible.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N54 3.0L

• Complete set of gaskets specifically designed for the S62 V8 engine
• Effectively prevents oil leaks, keeping the engine compartment clean
• Maintains proper lubrication for valve train and lifters
• Durable construction withstands high temperatures for long-lasting performance
• Helps avoid oil burning on the block or cylinder head
• Includes all necessary gaskets for a thorough valve cover service
• Optional ignition cover gasket available (part number 11121406744)

Benefits:

• Restores engine performance by eliminating oil leaks
• Protects critical engine components from oil-related damage
• Ensures a cleaner and more efficient engine compartment
• Easy installation with all required gaskets included

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes everything needed to re-seal your engine's head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following engines:
M54 2.5L 3.0L (09/2002+)

This comprehensive cylinder head gasket set is an excellent choice for the repair and replacement of gaskets and seals when dealing with a damaged cylinder head. It includes essential components such as intake and exhaust gaskets, valve stem seals, valve cover gaskets, exhaust gaskets, and throttle body gaskets. The set also features a stock size head gasket for added convenience.

Key Features:

• All-in-one cylinder head gasket set for gasket and seal replacement.
• Includes intake and exhaust gaskets, valve stem seals, valve cover gaskets, exhaust gaskets, and throttle body gaskets.
• Stock size head gasket included.

MINI R56 N14 N18 Gasket Set Crank Case is an essential kit designed to keep your engine running smoothly by preventing leaks and maintaining optimal pressure. This comprehensive gasket set includes everything needed to seal the water pump, oil filter housing, and main seals, ensuring your MINI’s engine components remain tightly sealed and perform at their best.

• Comprehensive Kit: Includes all necessary gaskets for water pump, oil filter housing, and main seals.
• Leak Prevention: Ensures a tight seal to prevent oil and coolant leaks, maintaining engine efficiency.
• Durability: Made from high-quality materials designed to withstand extreme temperatures and pressures.
• Engine Protection: Helps maintain proper engine pressure and reduces the risk of component failure.
• Perfect Fit: Specifically designed for the MINI R56 N14 and N18 engines for a precise fit and reliable performance.