BMW Engine Parts

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent.  The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories.  These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.

• Restores power and performance to your Mini
• Recommended replacement at 60,000-mile intervals
• Addresses issues such as low spark and misfires
• Prevents rust buildup for consistent spark delivery
• Includes plug wires for cylinder 1

From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.

To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 65A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.

Features:

Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 65A durometer bushings are geared toward the spirited driving enthusiast who wants better control over motor movement without sacrificing excessive vibrations. Choose BFI Stage 1 for a quality mount that eliminates drivetrain movement without adding excessive NVH.

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 525 horsepower and 335 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Kit features:

• Rotrex 92 trim supercharger running 7 PSI of boost
• Supercharger bracket, pulleys, & belt
• Self-contained oiling system with front-mount oil cooler
• 6 high-flow fuel injectors
• Colder heat range spark plugs
• Active Autowerke  Generation 7 intake manifold with dual bypass valve
• Front mount air-to-air intercooler
• Active Autowerke air filter
• Active Autowerke dyno-tuned software
• All mounting hardware, plumbing, hoses, & clamps
• Illustrated instruction manual & installation guide
• 2 year warranty with free tech support

Performance Specs:

• Power   :   525 BHP @ 7650 rpm
• Torque   :   335 ft/lbs @ 5400 rpm
• Boost Level   :   7-8 psi

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe