Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

JM Turbo Cooper - Extreme GTD47 K04 Turbocharger Upgrade

JM Turbo Cooper offers the Extreme GTD47 K04 turbocharger upgrade designed to deliver outstanding reliability and high-performance gains for the 2007+ MINI Cooper. This upgrade is a top choice for Mini and Peugeot owners, providing exceptional power output for applications exceeding 280hp.

Update: The improved gasket design on the back side now features a seamless gasket inset, and the package includes a new gasket for your convenience.

The JMTC Extreme GTD47 upgrade boasts a high-pressure, high-flow, dual-scrolling turbo that features a substantial 50mm compressor wheel. This design ensures maximum boost at the top end of the RPM range, making it ideal for track, off-road, and extreme street applications. The large GTX exhaust turbine complements the setup, delivering extra boost at high RPMs and preventing torque loss compared to the stock K03 turbine.

Whether you seek extreme track performance, drag strip dominance, or unrivaled street upgrades, this turbocharger is the perfect choice. It offers impressive torque and durability, outperforming many other options on the market. To fully unleash its potential, we recommend pairing it with one of our aftermarket exhaust systems.

It's important to note that to harness the additional power, a custom tune is required. Running without a tune will result in minimal to no HP gain.

Estimated Power Gains:

• Approximately 60hp with a tune, intercooler, downpipe, cold air intake, new plugs, basic maintenance, and carbon blasting/cleaning.
• 120hp or more with all the above modifications, plus a ported head, larger valves, ICE pipe, intercooler, and a 3"+ or larger exhaust system.

Extreme GTD Upgrade Features:

• Brand new turbo!
• 47mm billet compressor
• High-flow GTX exhaust turbine
• High-strength K04 internals
• Upgraded 360-degree bearing
• Designed for higher pressure
• High-temperature alloy turbine housing
• Dual-scrolling turbine housing
• Water-cooled bearing housing

For engine and turbocharger reliability, JMTC recommends a 3.0" or larger downpipe/exhaust size for the GTD turbochargers. Please avoid using the stock downpipe or stock-sized catalytic converter.

The OEM intake boot can be used with the removal of the inner sleeve for N14 engines. For N18 engines, the OEM boot at the turbo connection will need to be heated and expanded slightly, which can be done with a heat gun. This turbocharger also fits AEM intake, NM Eng intake, and Forge Intake (Boot). Please note that the hose might need to be warmed and stretched over with a hose expander.

The Game Changer Lite turbo upgrades bridges the gap between a Stage 1 and the full Stage Game Changer setup. Vargas has engineered the GC-Lite to have faster spooling than the full kit so there is less lag and you can get into the boost sooner. The GC line is a fresh, ground-up design for the N54. Vargas has built this with a pair of Mitsubishi TD04L turbos with high flow 9-blade turbines mated to billet 16T compressor wheels. Vargas has targeted near stock levels of spooling without sacrificing top end power. They do this by increasing the area inside the manifolds, turbine, and compressor housings. Between the full GC and GC-Lite kits, the Lite has less peak power but better drivability. These turbos are rated up to 650whp.

Other GC-Lite features -

• Upgraded thrust bearing
• Billet aluminum compressor wheel
• Stainless steel housings
• Stainless steel wastegate arms
• Silicone inlet and and charged air manifold to FMIC

Inlet and Chargepipes - the Game Changer turbos require the use of Vargas silicone inlet pipes and the manifold from the turbos to the intercooler (FMIC). The stock inlet ducts are made of plastic and very small diameter for making big power. Likewise, the hotside chargepipe is also undersized and a poor design for flow. Vargas upgrades these with larger silicone pieces that not only flow more air but are also a lot stronger for the kinds of boost this kit can produce. The stock inlets and hotside chargepipe will not work with the GC turbos. For the inlets, select the type of boost relief you are using - the stock diverter valve or an aftermarket blow-off valve.

Fitment to FMIC - an upgraded Front Mount Intercooler is required with this N54 turbo setup (the stock FMIC is not up to the task). Since there is no standardized connection for intercoolers, you will need to make note of which type you have an order the appropriate adapter from our options below.
Option A (+$25) - 2.5" and 90* turn up from the intercooler (CPE, AA, ER Sport, CXRacing)
Option B - 2.5" and angled up from the intercooler (AD Engineering, ETS, Helix, Cobb, ER Compeition)
Option C (+$25) - 3.0" and angled up from the intercooler (VRSF)
Option D (+$25) - 2.75" and angled up from the intercooler (Wagner EVO)
Option E (+$50) - 3.0" and straight out from the intercooler (AA Race)
Option F (+$25) - 2.5" and straight out from the intercooler (Forge)
Option G (+$15) - 3.0" and straight up from the interooler (AMS)

Install Kit - an Install Kit is also offered that includes all of the additional parts and pieces that will need to be replaced during this install (gaskets, hardware, etc).

135/1M/535 Fitment Note - the rear turbo in the Vargas kit is designed for the 335. A different coolant line is required for fitment on 135/1M and 535. You can source the coolant line on your own (BMW #11537558902) or add one to your kit below.

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

Diverter Valves or BOV are not included in this kit. You can use stock DVs with this kit or switch to an aftermarket BOV setup.

WHP rating: 650. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom N54 tuning is required to match these turbos with your existing mods and upgrades.