• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (T#36811799).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (we make 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

This kit is for purchase only. It's perfect for shops or racecars where changing wheels or brakes is common. We also have kits that are available for rent.

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

BMW & Supgra A90 ECS Wheel Spacers: Enhance Your Car's Performance

• Improves handling and stability
• Enhances the appearance of your BMW or Supgra A90
• Creates a wider stance for a more aggressive look
• Easy to install and remove

Upgrade your BMW or Supgra A90 with the BMW & Supgra A90 ECS Wheel Spacers. These wheel spacers are designed to improve handling and stability while enhancing the appearance of your vehicle. By creating a wider stance, they give your car a more aggressive look on the road. Plus, they are easy to install and remove, making them a convenient and practical upgrade for any BMW or Supgra A90 owner.

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T2000WF Wi-Fi TPMS SERVICE TOOL:

The Foxwell T2000WF is a professional TPMS diagnostic and maintenance tool that can activate and decode universal TPMS sensors, program TPMS, and diagnose any OEM tire pressure monitoring system. Featuring updated hardware for quicker operation and all-new software for increased capability, the T2000WF provides a complete, full-service solution for owners of TPMS-equipped vehicles.

Key Features:

Sensor Activation and Decoding: The T2000WF can activate and read data from universal TPMS sensors, ensuring they function correctly.

Sensor Programming: Allows for programming TPMS sensors to replace faulty ones or install new sensors when needed.

System Diagnostics: This tool diagnoses the vehicle's TPMS to identify and troubleshoot issues within the system.

WiFi Connectivity: The 'WF' in T2000WF indicates WiFi capabilities, enabling wireless updates and seamless data transfer.

User-Friendly Interface: Designed with an intuitive interface to facilitate ease of use for technicians and automotive enthusiasts.

This tool suits automotive professionals and enthusiasts seeking a reliable solution for TPMS-related services. If you're in need of a comprehensive, full-service diagnostic tool for your Tire Pressure Monitoring System equipped vehicle, look no further than the Foxwell T2000WF.

RUBBER T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market.

Features:

Rubber valve stem. 315MHz and 433MHz dual frequency. High precision air valve to avoid air leakage. 0-30 degree adjustability. Build in battery with an extended service life (more than 5 years) Temperature reading range -40F - 257F Pressure monitoring range 0 to 130.53psi Weight - 12G

Used on a wide variety of both BMW and MINI wheels. Best to replace whenever new tires are being installed.

Genuine BMW Rubber Valve - L=42,5Mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12
 

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can be easily activated and programmed using the Foxwell T2000 TPMS Service Tool (T#36811799).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (ES#4674668).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Upgrade your BMW's wheel setup with ECS Tuning's Extended Wheel Bolts. Available individually or with matched spacers for easy fitment, these bolts meet strict ISO 898 class 10.9 standards for mechanical and physical properties. Lab-tested to ensure compliance, they offer reliable and durable performance. The 14mm diameter, 1.25mm thread pitch, and 43mm length make these bolts ideal for various applications, providing a secure fit for your wheels.

• Extended wheel bolts for BMW
• Available individually or with matched spacers
• Meets ISO 898 class 10.9 standards
• Lab-tested for compliance and reliability
• 14mm diameter, 1.25mm thread pitch, 43mm length
• Ideal for wheel spacer applications