BMW Engine Parts for BMW 3 Series G20 (2019+)

Dinan Iridium Spark Plug - B48/B46 B58 S58

For Gen 1 B58 and Gen 2 B58 Engines Only (B58A, B58C, B58D, B58TU) - Not compatible wit... For Gen 1 and Gen 2 B46 / B48 Engines Only (B48A, B46D, B48TU) - Not compatible with G...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:40579788

Part#: D640-0001

Ships in 7 Business Days

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Dinan Iridium Spark Plugs are an excellent upgrade for tuned and even stock engines. Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they are also applicable to non-tuned / stock vehicles as well!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Red - BMW B36 B38 B46 B48 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908035

Part#: D650-0009

In Stock

11% off MSRP $ 45.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.65 USD

Add to Wish List

Qty

11% off MSRP

$ 45.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.65 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Black - BMW B36 B38 B46 B4...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908034

Part#: D650-0008

In Stock

11% off MSRP $ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.43 USD

Add to Wish List

Qty

11% off MSRP

$ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.43 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Blue - BMW B36 B38 B46 B48...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908036

Part#: D650-0010

In Stock

11% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

11% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Liqui Moly Top Tec 6600 0W-20 Oil Change Kit - BMW F22/23 F3X G01/02 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24145950

Part#: B48LMTTOSKT

Ships in 2 Business Days

Sale - Save 8% $ 104.99

This product was last offered at the strikethrough price on
08-31-2026

$ 96.85 USD

Add to Wish List

Qty

Sale - Save 8%

$ 104.99

This product was last offered at the strikethrough price on
08-31-2026

$ 96.85 USD

Add to Wish List

To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8076779

Part#: D760-0062

In Stock

11% off MSRP $ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Qty

11% off MSRP

$ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

B-Series Performance Ignition Coil - Red Set Of Six

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:27572113

Part#: D650-0009KT2

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

T#:43378540

Part#: B58G2OFH

Back Ordered

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

High-Performance Ignition Service Kit - B58TU 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:21965984

Part#: B58TUIGNKT

In Stock

Sale - Save 19% $ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 319.49 USD

Add to Wish List

Qty

Sale - Save 19%

$ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 319.49 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 NGK 96206 Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

2X Entries Into Our F80 M3 Sweepstakes

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

B58TU / B48TU One Way Crankcase Breather - G Chassis

2X Entries Into Our F80 M3 Sweepstakes
For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)

T#:25606657

Part#: VTTB58BREATHERTU

In Stock

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

Dinan Performance Ignition Service Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8421596

Part#: D650-0010KT3

In Stock

$ 271.99

This product was last offered at the strikethrough price on
07-14-2026

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connection. Great for modified or Tuned cars The kit includes: 4 Blue Dinan Coils with locks 4 NGK spark plugs 1 packet of American Grease Stick dielectric grease These Dinan ignition coils feature: Direct plug-and-play. Up to 10% more energy output than stock. Blue housing with Dinan Logo. True upgrade, not just aesthetic.

Show More Show Less

Comprehensive Valve Cover Gasket Kit - B58 Gen2

10X Entries Into Our F80 M3 Sweepstakes

T#:30197950

Part#: 11129894803KT2

Ships in 4 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set Profile Gasket (HPFP) 2x O-ring (Camshaft Position Sensor) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

For the later Gen3 B58 engine only

T#:38655170

Part#: BMS-BOVA-G3B58

In Stock

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Billet Oil Filter Cap

T#:21045500

Part#: BMS-BOFC

Ships in 1 Business Day

Starting at $ 79.00 USD

Add to Wish List

Starting at $ 79.00 USD

Add to Wish List

The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA

Show More Show Less

Billet Aluminum Motor Mount Inserts

2X Entries Into Our F80 M3 Sweepstakes

T#:29068525

Part#: VTT-G8X2X-INSERT

Back Ordered

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 5 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

OEM Accessory Belt Service Kit - B46/48 B58

10X Entries Into Our F80 M3 Sweepstakes

T#:587399

Part#: 112886137071ABKT

Ships in 1 Business Day

Sale - Save 19% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Performance Accessory Belt Kit - Kevlar Reinforced - BMW B46TU/B48TU...

10X Entries Into Our F80 M3 Sweepstakes

T#:29798952

Part#: 11288650740T1KT

Ships on Nov 12, 2026

Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Qty

Sale - Save 24%

$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: ECS Tuning Kevlar Reinforced Performance Accessory Belt - Designed to resist OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware

Show More Show Less

VTT BMW G Series Billet Oil Cap - Blue Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641130

Part#: OILCAPBLUE1

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8076777

Part#: D760-0060

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

BMS Oil Catch Can Kit - B58

T#:21045538

Part#: BMS-CC-GB58

Ships in 1 Business Day

Starting at $ 248.00 USD

Add to Wish List

Starting at $ 248.00 USD

Add to Wish List

It's no secret that the B58 BMW turbo motors can suffer from oil control problems causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems Burger Motorsports designed their oil catch can kit from the ground up specifically for the B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA. KIT INCLUDES (1) BMS N54 Oil Catch Can (1) Billet B58 bracket (1) 90º billet fitting/nipple (1) Custom Silicone inlet hose (1) 3.5" Straight hose (2) Stainless steel bracket screws #10-32 x 1/2" internal hex socket head Includes BMS intake silencer delete for installation with factory intake.

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Black Forest Industries Billet Aluminum Engine Mount Kit - Stage 1 - ...

T#:29068517

Part#: EBFI77-MG20-601

Ships on Sep 24, 2026

$ 634.99 USD

Add to Wish List

Qty

$ 634.99 USD

Add to Wish List

From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.

To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 65A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.

Features:

Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 65A durometer bushings are geared toward the spirited driving enthusiast who wants better control over motor movement without sacrificing excessive vibrations. Choose BFI Stage 1 for a quality mount that eliminates drivetrain movement without adding excessive NVH.

Show More Show Less

Black Forest Industries Billet Aluminum Engine Mount Kit - Stage 2 - ...

T#:29068521

Part#: EBFI77-MG20-602

Ships on Sep 24, 2026

$ 654.99 USD

Add to Wish List

Qty

$ 654.99 USD

Add to Wish List

From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.

To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 85A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.

Features:

Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 85A durometer bushings are geared toward the spirited driving enthusiast who doesn't mind increasing NVH. Choose BFI Stage 2 for a quality mount that eliminates drivetrain movement.

Note: Stage 2 mounts increase NVH. Therefore, these mounts are not intended to be used on daily driven vehicles.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Red Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641120

Part#: OILCAPRED1

Ships in 9 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Vargas Ignition Coil Kit (Red) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309604

Part#: VTT-COIL-B58-RED

Ships in 5 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Sep 18, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Dinan B58 Carbon Fiber Engine Cover - Gloss Finish - BMW G20 G22/23/2...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:14452854

Part#: D590-0003

Ships in 7 Business Days

11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Qty

11% off MSRP

$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Borrowing on classic engine/valve cover elements from yesteryear, the Dinan G2x/G4x B58 engine cover takes those queues and incorporates additional elements to form a transformative engine bay dress-up piece like no other. Like the ever-popular and lusted-after E36/E46 Dinan carbon fiber valve covers of the past, the G chassis B58 engine cover mimics the BMW power stripes but with a Dinan twist. Beyond the legacy homage, the 2x2 gloss twill carbon fiber base gives way to opposing matte carbon fiber and white painted accents among the cylinder count callouts. This small touch adds visual intrigue to an otherwise largely feature-deficient landscape. The conflicting finishes also carry the added benefit of tying together elements within the space that may be of the secondary finish for nearly limitless visual versatility in a single piece. Features: 2x2 gloss twill carbon fiber with opposing matte carbon fiber and painted white accents Power stripes featuring Dinan – an homage to OEM and legacy Dinan engine/valve covers Direct replacement of factory engine cover Lighter - OEM cover: 4.1 pounds vs. Dinan Cover: 2.9 pounds Grommets included for quick and easy installation

Show More Show Less

BMS Oil Catch Can - BMW G2X G42 B46/B48 2.0L

For models with the Gen2 B48 (B48D / B48TU) engine only

T#:46959262

Part#: BMSOCCB48G2X

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

For turbocharged BMWs, oil control issues have always been a slight headache. Burger Motorsports has designed a new oil catch can system specifically for the BMW Gen2 B46/B48 engine to address these issues. Featuring 100% CNC machining with zero welding for a precision fit and long life, the can itself is guaranteed for the life of the vehicle. The included hose exceeds the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no horsepower-robbing crankcase pressure buildup. The BMS oil separator maintains the factory's fully closed-loop PCV operation, preventing any PCV vapor from escaping into the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. The install takes around 10 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Oil Drain Plug

10X Entries Into Our F80 M3 Sweepstakes

T#:41188174

Part#: 11137535106TKT

Ships in 2 Business Days

Sale - Save 47% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.73 USD

Add to Wish List

Qty

Sale - Save 47%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.73 USD

Add to Wish List

Includes a one time use crush washer.

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

WPC-Treated Performance Rod Bearing Installation Kit - B46 / B48 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:36066270

Part#: B48-WPC-RBKT2

In Stock

Sale - Save 25% $ 551.99

This product was last offered at the strikethrough price on
05-03-2026

$ 413.62 USD

Add to Wish List

Qty

Sale - Save 25%

$ 551.99

This product was last offered at the strikethrough price on
05-03-2026

$ 413.62 USD

Add to Wish List

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes:

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Genuine BMW Connecting Rod Bolts (8) Assembly Lube (4 oz.)

Show More Show Less

Accessory Belt Service Kit - HD Gates Belt - BMW B46TU/B48TU B58TU ...

10X Entries Into Our F80 M3 Sweepstakes

T#:29798950

Part#: 11288650740TKT

Ships in 1 Business Day

Sale - Save 13% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 123.62 USD

Add to Wish List

Qty

Sale - Save 13%

$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 123.62 USD

Add to Wish List

Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: Gates Green Heavy Duty Accessory Belt - Designed to exceed OE durability, felxibility, and longevity OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and Gen2 B58 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:27871828

Part#: 11428583896TKT

Ships in 2 Business Days

Sale - Save 4% $ 150.99

This product was last offered at the strikethrough price on
08-26-2026

$ 145.23 USD

Add to Wish List

Qty

Sale - Save 4%

$ 150.99

This product was last offered at the strikethrough price on
08-26-2026

$ 145.23 USD

Add to Wish List

One unfortunate problem BMW failed to address with the B58 engines is leaking oil filter housing gaskets. If your oil filter housing gaskets are leaking, you will notice a slow oil loss, pooling oil under your vehicle, and oil running down the left rear side of your engine block and on the side of your oil pan. This kit includes all-new gaskets to re-seal your filter housing plus Liqui-Moly oil and a new Hengst filter to get your car back up and running and leak-free!

Show More Show Less

Ignition Service Kit - BMW G-Chassis B46 B48 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:30861158

Part#: 12138643360TKT

In Stock

Sale - Save 5% $ 272.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.47 USD

Add to Wish List

Qty

Sale - Save 5%

$ 272.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.47 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and its ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance! See kit contents below for a complete list of included components.

Show More Show Less

VTT B58TU GC-MID Turbocharger Upgrade - 6-Port Manifold B58 3.0L Engi...

2X Entries Into Our F80 M3 Sweepstakes

T#:25971905

Part#: B58TUGCMID6P

Ships in 10 Business Days

$ 2,404.99 USD

Add to Wish List

Qty

$ 2,404.99 USD

Add to Wish List

Upgrade your BMW B58 engine with the VTT GC-MID Stock-650WHP (TU ONLY) turbocharger for unparalleled performance gains. VTT's turbocharger offers easy installation, eliminating core charges and long lead times associated with traditional upgrades. With enhanced design elements and OE-quality castings, this turbocharger supports over 600WHP while maintaining factory spool and connections.

All-new castings with factory restrictions removed
Full 3' turbocharger inlet size with included silicone inlet elbow
9-blade turbine and compressor wheels for increased flow and spool
Direct connection to all factory lines
Redesigned internal components for improved performance
No core charges and no long lead times
Full 12-month unlimited mileage warranty

Show More Show Less

Burger Motorsport Oil Catch Can - G-Chassis Gen 3 B58

For 2025+ models with the Gen3 B58 engine

T#:46993589

Part#: G3B58OCC

Ships on Sep 18, 2026

Starting at $ 219.00 USD

Add to Wish List

Starting at $ 219.00 USD

Add to Wish List

It's no secret that B58 BMW turbo motors can suffer from oil control problems, causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels and the higher the mileage, the more apparent these problems become. The solution to this problem has finally arrived. The Burger Motorsports oil catch can. While there are other catch cans on the market, they all fall short in various areas. Some are mounted on the hot/turbo side of the motor, preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation, causing internal motor/ring sealing issues. Some have insufficient or no internal baffle systems, while others have internal baffle systems that are too restrictive. Some even bypass the PCV system altogether, venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems, Burger Motorsports designed their oil catch can kit from the ground up specifically for the 2025 and newer Gen 3 B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation, preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Installation takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 18, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Vargas Ignition Coil Kit (Black) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309601

Part#: VTT-COIL-B58-BLK

In Stock

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Black Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641127

Part#: OILCAPBLK1

Ships in 10 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

2X Entries Into Our F80 M3 Sweepstakes

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series G20 (2019+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results