BMW Engine Parts for BMW 4 Series G26 (2022+)

Dinan Iridium Spark Plug - B48/B46 B58 S58

For Gen 1 B58 and Gen 2 B58 Engines Only (B58A, B58C, B58D, B58TU) - Not compatible wit... For Gen 1 and Gen 2 B46 / B48 Engines Only (B48A, B46D, B48TU) - Not compatible with G...

Call In Or Chat For Best Price!

T#:40579788

Part#: D640-0001

In Stock

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Dinan Iridium Spark Plugs are an excellent upgrade for tuned and even stock engines. Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they are also applicable to non-tuned / stock vehicles as well!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Black - BMW B36 B38 B46 B4...

Call In Or Chat For Best Price!

T#:4908034

Part#: D650-0008

In Stock

11% off MSRP $ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.43 USD

Add to Wish List

Qty

11% off MSRP

$ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.43 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Red - BMW B36 B38 B46 B48 ...

Call In Or Chat For Best Price!

T#:4908035

Part#: D650-0009

In Stock

11% off MSRP $ 45.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.65 USD

Add to Wish List

Qty

11% off MSRP

$ 45.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.65 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Blue - BMW B36 B38 B46 B48...

Call In Or Chat For Best Price!

T#:4908036

Part#: D650-0010

In Stock

11% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

11% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...

Call In Or Chat For Best Price!

T#:8076779

Part#: D760-0062

In Stock

11% off MSRP $ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Qty

11% off MSRP

$ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

B-Series Performance Ignition Coil - Red Set Of Six

Call In Or Chat For Best Price!

T#:27572113

Part#: D650-0009KT2

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

T#:43378540

Part#: B58G2OFH

Back Ordered

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

OEM Febi Mechanical Accessory Belt Tensioner - BMW B46/48 B58 ...

For Pre-LCI models only

We Price Match - Give Us A Call or Chat!

T#:587397

Part#: 11288570439

Ships in 7 Business Days

$ 140.99

This product was last offered at the strikethrough price on
05-07-2026

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Accessory belt tensioners provide tension to the belt drive system, ensuring the belt is able to properly turn engine accessories without slipping. If your tensioner has failed, replace it with a brand-new unit to ensure proper water pump and alternator functionality.

Show More Show Less

Billet Oil Filter Cap

T#:21045500

Part#: BMS-BOFC

In Stock

Starting at $ 79.00 USD

Add to Wish List

Starting at $ 79.00 USD

Add to Wish List

The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 8 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Dinan Performance Ignition Service Kit

Call In Or Chat For Best Price!

T#:8421596

Part#: D650-0010KT3

In Stock

$ 271.99

This product was last offered at the strikethrough price on
07-14-2026

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connection. Great for modified or Tuned cars The kit includes: 4 Blue Dinan Coils with locks 4 NGK spark plugs 1 packet of American Grease Stick dielectric grease These Dinan ignition coils feature: Direct plug-and-play. Up to 10% more energy output than stock. Blue housing with Dinan Logo. True upgrade, not just aesthetic.

Show More Show Less

BMS Oil Catch Can Kit - B58

T#:21045538

Part#: BMS-CC-GB58

Ships in 1 Business Day

Starting at $ 248.00 USD

Add to Wish List

Starting at $ 248.00 USD

Add to Wish List

It's no secret that the B58 BMW turbo motors can suffer from oil control problems causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems Burger Motorsports designed their oil catch can kit from the ground up specifically for the B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA. KIT INCLUDES (1) BMS N54 Oil Catch Can (1) Billet B58 bracket (1) 90º billet fitting/nipple (1) Custom Silicone inlet hose (1) 3.5" Straight hose (2) Stainless steel bracket screws #10-32 x 1/2" internal hex socket head Includes BMS intake silencer delete for installation with factory intake.

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

For the later Gen3 B58 engine only

T#:38655170

Part#: BMS-BOVA-G3B58

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...

Call In Or Chat For Best Price!

T#:8076777

Part#: D760-0060

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 2 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Dinan B58 Carbon Fiber Engine Cover - Gloss Finish - BMW G20 G22/23/2...

Call In Or Chat For Best Price!

T#:14452854

Part#: D590-0003

Ships on Aug 17, 2026

11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Qty

11% off MSRP

$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Borrowing on classic engine/valve cover elements from yesteryear, the Dinan G2x/G4x B58 engine cover takes those queues and incorporates additional elements to form a transformative engine bay dress-up piece like no other. Like the ever-popular and lusted-after E36/E46 Dinan carbon fiber valve covers of the past, the G chassis B58 engine cover mimics the BMW power stripes but with a Dinan twist. Beyond the legacy homage, the 2x2 gloss twill carbon fiber base gives way to opposing matte carbon fiber and white painted accents among the cylinder count callouts. This small touch adds visual intrigue to an otherwise largely feature-deficient landscape. The conflicting finishes also carry the added benefit of tying together elements within the space that may be of the secondary finish for nearly limitless visual versatility in a single piece. Features: 2x2 gloss twill carbon fiber with opposing matte carbon fiber and painted white accents Power stripes featuring Dinan – an homage to OEM and legacy Dinan engine/valve covers Direct replacement of factory engine cover Lighter - OEM cover: 4.1 pounds vs. Dinan Cover: 2.9 pounds Grommets included for quick and easy installation

Show More Show Less

Spark Plugs - Set Of Six

T#:14982199

Part#: 121200405516KT

Back Ordered

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

BMS Oil Catch Can - BMW G2X G42 B46/B48 2.0L

For models with the Gen2 B48 (B48D / B48TU) engine only

T#:46959262

Part#: BMSOCCB48G2X

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

For turbocharged BMWs, oil control issues have always been a slight headache. Burger Motorsports has designed a new oil catch can system specifically for the BMW Gen2 B46/B48 engine to address these issues. Featuring 100% CNC machining with zero welding for a precision fit and long life, the can itself is guaranteed for the life of the vehicle. The included hose exceeds the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no horsepower-robbing crankcase pressure buildup. The BMS oil separator maintains the factory's fully closed-loop PCV operation, preventing any PCV vapor from escaping into the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. The install takes around 10 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA.

Show More Show Less

Screw Plug - 11137535106

We Price Match - Give Us A Call or Chat!

T#:22208

Part#: 11137535106

In Stock

$ 9.99

This product was last offered at the strikethrough price on
02-15-2026

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

SCREW PLUG for OIL PAN

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Febi Oil Filter - Priced Each - B58 3.0L

We Price Match - Give Us A Call or Chat!

T#:17605194

Part#: 11427826799

In Stock

$ 13.99

This product was last offered at the strikethrough price on
02-25-2026

$ 10.50 USD

Add to Wish List

Qty

$ 10.50 USD

Add to Wish List

Febi has a comprehensive range of oil filters that are OE-matching quality. The best possible filtration performance always guarantees optimal engine operation. If you are changing your filter, check ECS Tuning's website for high-quality replacement lubricants. Pick up ECS Tuning's own magnetic drain plug trap and capture shavings before they make it through your engine and to the filter.

Show More Show Less

Burger Motorsport Oil Catch Can - G-Chassis Gen 3 B58

For 2025+ models with the Gen3 B58 engine

T#:46993589

Part#: G3B58OCC

Ships on Aug 6, 2026

Starting at $ 219.00 USD

Add to Wish List

Starting at $ 219.00 USD

Add to Wish List

It's no secret that B58 BMW turbo motors can suffer from oil control problems, causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels and the higher the mileage, the more apparent these problems become. The solution to this problem has finally arrived. The Burger Motorsports oil catch can. While there are other catch cans on the market, they all fall short in various areas. Some are mounted on the hot/turbo side of the motor, preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation, causing internal motor/ring sealing issues. Some have insufficient or no internal baffle systems, while others have internal baffle systems that are too restrictive. Some even bypass the PCV system altogether, venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems, Burger Motorsports designed their oil catch can kit from the ground up specifically for the 2025 and newer Gen 3 B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation, preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Installation takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 7, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 7, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Dinan Experience Package (E) - G2X M340i/M440i

For vehicles with the B58TU (B58D) engine only

Call In Or Chat For Best Price!

T#:45997489

Part#: G2XM340IM440IEKT

Back Ordered

$ 3,752.99 USD

Add to Wish List

Qty

$ 3,752.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience.

Show More Show Less

Dinan B58 Carbon Fiber Engine Cover - Matte Finish - BMW G20 G22/23/2...

Call In Or Chat For Best Price!

T#:14452855

Part#: D590-0004

Ships on Aug 17, 2026

11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Qty

11% off MSRP

$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Borrowing on classic engine/valve cover elements from yesteryear, the Dinan G2x/G4x B58 engine cover takes those queues and incorporates additional elements to form a transformative engine bay dress-up piece like no other. Like the ever-popular and lusted-after E36/E46 Dinan carbon fiber valve covers of the past, the G chassis B58 engine cover mimics the BMW power stripes but with a Dinan twist. Beyond the legacy homage, the 2x2 matte twill carbon fiber base gives way to opposing gloss carbon fiber and white painted accents among the cylinder count callouts. This small touch adds visual intrigue to an otherwise largely feature-deficient landscape. The conflicting finishes also carry the added benefit of tying together elements within the space that may be of the secondary finish for nearly limitless visual versatility in a single piece. Features: 2x2 matte twill carbon fiber with opposing gloss carbon fiber and painted white accents Power stripes featuring Dinan – an homage to OEM and legacy Dinan engine/valve covers Direct replacement of factory engine cover Lighter - OEM cover: 4.1 pounds vs. Dinan Cover: 2.9 pounds Grommets included for quick and easy installation

Show More Show Less

Febi-Bilstein Crankshaft Seal - 11118664905

We Price Match - Give Us A Call or Chat!

T#:29300821

Part#: 11118664905

Special Order: No Guaranteed ETA

$ 31.99

This product was last offered at the strikethrough price on
01-27-2026

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Enhance the reliability and performance of your BMW engine with a Febi-Bilstein Crankshaft Seal, part number 11118664905.

Designed specifically for your BMW, this high-quality seal ensures a perfect fit and optimal functionality, helping to maintain the integrity of your engine. This seal replaces aging, cracked, or damaged seals that are known to cause oil leaks.

Features:

Easy Installation: Designed for straightforward installation, making it easier for you or your mechanic to replace. Enhanced Engine Protection: Helps protect your engine from contaminants and ensures smooth operation. Precision Fit: Engineered to meet the exact specifications of your BMW, ensuring a perfect and secure fit. Durable Material: Made from high-quality materials that resist wear and tear, providing long-lasting performance. Leak Prevention: Effectively seals the crankshaft to prevent oil leaks, maintaining optimal oil pressure and engine performance. Trust in Febi's commitment to quality and performance for all your automotive needs. Invest in this high-quality Crankshaft Seal to keep your engine running smoothly and efficiently.

Show More Show Less

Lower Timing Chain Tensioner

We Price Match - Give Us A Call or Chat!

T#:592999

Part#: 13527797905

Special Order: No Guaranteed ETA

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

The guide rails in your timing set keep everything tracking properly. Because it is made out of a plastic-like material, years of abrasion can wear parts of it away. This can cause the chain can to become slightly loose and cause a chain 'slap' or rattle noise. Replace your damaged timing chain tensioner and guide rails to keep timing chain noise to a minimum. Located on the outside of the timing chain guide that keeps tension on the chain.

Show More Show Less

Febi Engine Oil Pump Assembly - B46/B48

T#:54816258

Part#: 11418631810

Special Order: No Guaranteed ETA

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

High-durability mechanical oil pump preserves vital oil pressure on track.

Oil Level Sensor

T#:55857752

Part#: 12615A740A3

Special Order: No Guaranteed ETA

$ 87.99 USD

Add to Wish List

Qty

$ 87.99 USD

Add to Wish List

Invaluable for keeping tabs on your engine’s lifeblood, the Febi Bilstein oil level sensor is an essential maintenance item for demanding enthusiasts.

C-Clip Nut

T#:55821709

Part#: 51127070202

Special Order: No Guaranteed ETA

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

This Febi-manufactured M6 C-Clip Nut is the exact direct-replacement fastener needed to keep your BMW or MINI's bodywork properly secured.

Ignition Coil

T#:56218622

Part#: 12138678438

Special Order: No Guaranteed ETA

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Febi Bilstein ignition coils deliver the high-energy spark needed to maintain clean combustion across the powerband.

OEM Febi Cylinder Head Valve Cover - BMW B58TU (B58 Gen2, B58D) ...

For earlier models with the B58D (B58TU) engine only - Does not fit the later B58TU2 Ge...

T#:54816250

Part#: 1005498

Special Order: No Guaranteed ETA

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

This Cylinder Head Cover is a cost-effective alternative to expensive original dealer parts, engineered to meet strict technical specifications.

Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...

T#:46924974

Part#: B58OFBC-BO

Back Ordered

$ 82.00 USD

Add to Wish List

Qty

$ 82.00 USD

Add to Wish List

The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.

Show More Show Less

Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...

T#:46924977

Part#: B58OFBC-90F

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.

Show More Show Less