BMW Engine Parts for BMW Z Series G29 (2019+)

Dinan Iridium Spark Plug - B48/B46 B58 S58

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:40579788

Part#: D640-0001

In Stock

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Dinan Iridium Spark Plugs are an excellent upgrade for tuned and even stock engines. Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they are also applicable to non-tuned / stock vehicles as well!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Red - BMW B36 B38 B46 B48 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908035

Part#: D650-0009

In Stock

11% off MSRP $ 45.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.65 USD

Add to Wish List

Qty

11% off MSRP

$ 45.73

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.65 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Black - BMW B36 B38 B46 B4...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908034

Part#: D650-0008

In Stock

11% off MSRP $ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.43 USD

Add to Wish List

Qty

11% off MSRP

$ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.43 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Blue - BMW B36 B38 B46 B48...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908036

Part#: D650-0010

In Stock

11% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

11% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Elring Turbocharger Gasket Set - BMW B58D 3.0L (B58 Gen2 / B58TU 6-Po...

For vehicles with the B58D (B58 Gen2 / B58TU 6-Port) engine only - Not for B58A or B58N...

2X Entries Into Our F80 M3 Sweepstakes

T#:45312877

Part#: 113.440

In Stock

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Prevent exhaust and oil leaks from your turbo and exhaust manifold with this kit from Elring For use with turbocharge p/n 11657934387

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8076779

Part#: D760-0062

In Stock

11% off MSRP $ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Qty

11% off MSRP

$ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

B-Series Performance Ignition Coil - Red Set Of Six

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:27572113

Part#: D650-0009KT2

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

2X Entries Into Our F80 M3 Sweepstakes

T#:49822557

Part#: VTTBS58BLOCK

In Stock

Sale - Save 15% $ 29.99

This product was last offered at the strikethrough price on
09-03-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 29.99

This product was last offered at the strikethrough price on
09-03-2026

$ 25.49 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

TurboSmart OPR V2 Oil Pressure Regulator

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

B58TU / B48TU One Way Crankcase Breather - G Chassis

2X Entries Into Our F80 M3 Sweepstakes
For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)

T#:25606657

Part#: VTTB58BREATHERTU

In Stock

Sale - Save 15% $ 128.99

This product was last offered at the strikethrough price on
09-03-2026

$ 109.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 128.99

This product was last offered at the strikethrough price on
09-03-2026

$ 109.64 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 1-2 days

Sale - Save 15% $ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Dinan Performance Ignition Service Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8421596

Part#: D650-0010KT3

In Stock

$ 271.99

This product was last offered at the strikethrough price on
07-14-2026

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connection. Great for modified or Tuned cars The kit includes: 4 Blue Dinan Coils with locks 4 NGK spark plugs 1 packet of American Grease Stick dielectric grease These Dinan ignition coils feature: Direct plug-and-play. Up to 10% more energy output than stock. Blue housing with Dinan Logo. True upgrade, not just aesthetic.

Show More Show Less

OEM Elring Valve Cover Gasket - B46/48 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2706165

Part#: 11128618519

In Stock

$ 56.99

This product was last offered at the strikethrough price on
04-15-2026

$ 31.29 USD

Add to Wish List

Qty

$ 31.29 USD

Add to Wish List

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Sale - Save 15% $ 52.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 45.04 USD

Add to Wish List

Sale - Save 15%

$ 52.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 45.04 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Blue Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641130

Part#: OILCAPBLUE1

In Stock

Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
09-03-2026

$ 50.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 59.99

This product was last offered at the strikethrough price on
09-03-2026

$ 50.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Elring Screw Clamp - 18328612537

2X Entries Into Our F80 M3 Sweepstakes

T#:27205320

Part#: 18328612537

In Stock

$ 44.99

This product was last offered at the strikethrough price on
03-10-2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Elring OE Screw Clamp - 18328612537 - D=135mm

ElringKlinger AG has been a pioneer of gaskets, valves, and seals since 1879. Providing some of the most common gaskets to the European auto industry and beyond, such as valve cover gaskets, crankshaft seals, oil seals, head gaskets, dirko sealant, and many more.

Show More Show Less

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

T#:22591972

Part#: TS-0551-1011

In Stock at Vendor

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8076777

Part#: D760-0060

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Shaft Seal - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:638353

Part#: 11118604931

Ships in 2 Business Days

$ 28.99

This product was last offered at the strikethrough price on
08-26-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Elring Eccentric Shaft Sensor Seal - 11378662525

2X Entries Into Our F80 M3 Sweepstakes

T#:29300824

Part#: 11378662525

Ships in 2 Business Days

$ 42.99

This product was last offered at the strikethrough price on
08-26-2026

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

Ensure your BMW's engine runs flawlessly with the Elring Eccentric Shaft Sensor Seal. This essential component provides a tight seal for the eccentric shaft sensor, effectively preventing oil leaks and maintaining accurate sensor readings. Designed for BMW owners who prioritize engine health and efficiency, this seal is a vital part of keeping your vehicle in top condition.

Key Features:

Exact Match: Crafted to fit precisely with your BMW's eccentric shaft sensor, ensuring a perfect and secure fit every time. Robust Materials: Constructed from premium, resilient materials that withstand wear, extreme temperatures, and chemical exposure for extended durability. Leak-Proof Seal: Expertly designed to prevent oil leaks, safeguarding your engine and ensuring it performs at its peak. Sensor Accuracy: Maintains the integrity of the eccentric shaft sensor, ensuring accurate readings for precise engine timing and optimal performance. OEM Standard: Meets or exceeds OEM specifications, providing reliable and consistent performance. Simple Installation: Engineered for easy installation, allowing for quick replacement with minimal effort, whether by a professional or a DIY enthusiast. Engine Longevity: Protects your engine from oil contamination and potential damage, contributing to the smooth and long-lasting operation of your vehicle. Choose the Elring Eccentric Shaft Sensor Seal to uphold the quality and precision of your BMW's engine. Trust in Elring's expertise to replace your worn-out seal with a high-quality component designed to keep your engine running smoothly and efficiently.

Show More Show Less

Elring Crankshaft Seal - Front Position - 11118664905

2X Entries Into Our F80 M3 Sweepstakes

T#:29300820

Part#: 11118664905

Ships in 2 Business Days

$ 28.99

This product was last offered at the strikethrough price on
08-26-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Enhance the reliability and performance of your BMW engine with an Elring Crankshaft Seal, part number 11118664905.

Designed specifically for your BMW, this high-quality seal ensures a perfect fit and optimal functionality, helping to maintain the integrity of your engine. This seal replaces aging, cracked, or damaged seals that are known to cause oil leaks.

Features:

Easy Installation: Designed for straightforward installation, making it easier for you or your mechanic to replace. Enhanced Engine Protection: Helps protect your engine from contaminants and ensures smooth operation. Precision Fit: Engineered to meet the exact specifications of your BMW, ensuring a perfect and secure fit. Durable Material: Made from high-quality materials that resist wear and tear, providing long-lasting performance. Leak Prevention: Effectively seals the crankshaft to prevent oil leaks, maintaining optimal oil pressure and engine performance. Trust in Elring's commitment to quality and performance for all your automotive needs. Invest in this high-quality Crankshaft Seal to keep your engine running smoothly and efficiently.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Red Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641120

Part#: OILCAPRED1

Ships in 6 Business Days

Sale - Save 15% $ 62.99

This product was last offered at the strikethrough price on
09-03-2026

$ 53.54 USD

Add to Wish List

Qty

Sale - Save 15%

$ 62.99

This product was last offered at the strikethrough price on
09-03-2026

$ 53.54 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

OEM Elring Valve Stem Seal Kit - Intake - N20/26 B48/46 2.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691342

Part#: 11340038719

Ships in 1 Business Day

$ 34.99

This product was last offered at the strikethrough price on
05-07-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Includes enough valve seals to do all the intake valves

Vargas Ignition Coil Kit (Red) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309604

Part#: VTT-COIL-B58-RED

Ships in 5 Business Days

Sale - Save 15% $ 222.99

This product was last offered at the strikethrough price on
09-03-2026

$ 189.54 USD

Add to Wish List

Qty

Sale - Save 15%

$ 222.99

This product was last offered at the strikethrough price on
09-03-2026

$ 189.54 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

Sale - Save 15% $ 37.99

This product was last offered at the strikethrough price on
09-03-2026

$ 32.29 USD

Add to Wish List

Qty

Sale - Save 15%

$ 37.99

This product was last offered at the strikethrough price on
09-03-2026

$ 32.29 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Sep 23, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Dinan B58 Carbon Fiber Engine Cover - Gloss Finish - BMW G20 G22/23/2...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:14452854

Part#: D590-0003

Ships in 7 Business Days

11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Qty

11% off MSRP

$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Borrowing on classic engine/valve cover elements from yesteryear, the Dinan G2x/G4x B58 engine cover takes those queues and incorporates additional elements to form a transformative engine bay dress-up piece like no other. Like the ever-popular and lusted-after E36/E46 Dinan carbon fiber valve covers of the past, the G chassis B58 engine cover mimics the BMW power stripes but with a Dinan twist. Beyond the legacy homage, the 2x2 gloss twill carbon fiber base gives way to opposing matte carbon fiber and white painted accents among the cylinder count callouts. This small touch adds visual intrigue to an otherwise largely feature-deficient landscape. The conflicting finishes also carry the added benefit of tying together elements within the space that may be of the secondary finish for nearly limitless visual versatility in a single piece. Features: 2x2 gloss twill carbon fiber with opposing matte carbon fiber and painted white accents Power stripes featuring Dinan – an homage to OEM and legacy Dinan engine/valve covers Direct replacement of factory engine cover Lighter - OEM cover: 4.1 pounds vs. Dinan Cover: 2.9 pounds Grommets included for quick and easy installation

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
09-03-2026

$ 50.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 59.99

This product was last offered at the strikethrough price on
09-03-2026

$ 50.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Throttle Housing Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:23284097

Part#: 13548632344

In Stock

$ 10.99

This product was last offered at the strikethrough price on
03-24-2026

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Elring Intake Manifold Gasket - BMW B46D B46X B58D

2X Entries Into Our F80 M3 Sweepstakes

T#:44733238

Part#: 076.500

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

If you are experiencing a boost leak or have removed your intake manifold, it is a good idea to replace the intake manifold gaskets. This gasket from Elring is a perfect replacement, featuring the same or better quality compared to Genuine BMW, but without the marked-up BMW price tag.

Show More Show Less

BMW Oil Cooler Gasket Set

2X Entries Into Our F80 M3 Sweepstakes

T#:15081507

Part#: 11428583896

In Stock

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Replace your oil cooler gaskets when changing or removing your oil cooler.

Injector Seal

2X Entries Into Our F80 M3 Sweepstakes

T#:15015295

Part#: 13537591006

In Stock

$ 4.39 USD

Add to Wish List

Qty

$ 4.39 USD

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

Elring High Pressure Fuel Pump Gasket - BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:45483642

Part#: 076.510

In Stock

$ 13.99

This product was last offered at the strikethrough price on
07-23-2026

$ 12.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 13.99

This product was last offered at the strikethrough price on
07-23-2026

$ 12.99 USD

Limited Qty Sale

Add to Wish List

Seals the high pressure fuel pump to the valve cover Replaces BMW # 11127617411

Elring Dirko Gray Silicone Sealant - 70mL

2X Entries Into Our F80 M3 Sweepstakes

T#:361160

Part#: UN1253000

In Stock

$ 10.79 USD

Add to Wish List

Qty

$ 10.79 USD

Add to Wish List

Useful for the creation of many gaskets. Max temperature: 300C

Fischer and Plath Gasket Ring

2X Entries Into Our F80 M3 Sweepstakes

T#:362383

Part#: 07119963201

In Stock

$ 0.82 USD

Add to Wish List

Qty

$ 0.82 USD

Add to Wish List

A14x18-CU

Engine Intake Manifold Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:5216001

Part#: 11618637800

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Gasket that goes between the intake manifold and the engine Gasket seal for the Intake Manifold/Charge Air Cooler. -6 required for B58 motors -4 required for B46 and B48 motors

VTT B58TU GC-MID Turbocharger Upgrade - 6-Port Manifold B58 3.0L Engi...

2X Entries Into Our F80 M3 Sweepstakes

T#:25971905

Part#: B58TUGCMID6P

Ships in 10 Business Days

Sale - Save 15% $ 2,404.99

This product was last offered at the strikethrough price on
09-03-2026

$ 2,044.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 2,404.99

This product was last offered at the strikethrough price on
09-03-2026

$ 2,044.24 USD

Add to Wish List

Upgrade your BMW B58 engine with the VTT GC-MID Stock-650WHP (TU ONLY) turbocharger for unparalleled performance gains. VTT's turbocharger offers easy installation, eliminating core charges and long lead times associated with traditional upgrades. With enhanced design elements and OE-quality castings, this turbocharger supports over 600WHP while maintaining factory spool and connections.

All-new castings with factory restrictions removed
Full 3' turbocharger inlet size with included silicone inlet elbow
9-blade turbine and compressor wheels for increased flow and spool
Direct connection to all factory lines
Redesigned internal components for improved performance
No core charges and no long lead times
Full 12-month unlimited mileage warranty

Show More Show Less

BMW Head Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15412467

Part#: 11128654269

Ships in 1 Business Day

$ 183.99

This product was last offered at the strikethrough price on
05-07-2026

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Most people will probably experience a head gasket failure at one point or another during vehicle ownership. The signs of a failed head gasket are easy to identify: Milky oil as the coolant mixes in, loss of performance, and sweet smelling, white smoke coming from your tailpipe. It usually happens when the engine is overheated or has a number of miles on it. Replace yours and get your engine running again.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Black Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641127

Part#: OILCAPBLK1

Ships in 10 Business Days

Sale - Save 15% $ 62.99

This product was last offered at the strikethrough price on
09-03-2026

$ 53.54 USD

Add to Wish List

Qty

Sale - Save 15%

$ 62.99

This product was last offered at the strikethrough price on
09-03-2026

$ 53.54 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Vargas Ignition Coil Kit (Black) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309601

Part#: VTT-COIL-B58-BLK

In Stock

Sale - Save 15% $ 222.99

This product was last offered at the strikethrough price on
09-03-2026

$ 189.12 USD

Add to Wish List

Qty

Sale - Save 15%

$ 222.99

This product was last offered at the strikethrough price on
09-03-2026

$ 189.12 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672717

Part#: VTT-MAP-HARNESS

Ships in 10 Business Days

Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
09-03-2026

$ 50.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 59.99

This product was last offered at the strikethrough price on
09-03-2026

$ 50.99 USD

Add to Wish List

As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672701

Part#: VTT-EXTENDED-STU

Ships in 10 Business Days

Sale - Save 15% $ 3.99

This product was last offered at the strikethrough price on
09-03-2026

$ 3.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 3.99

This product was last offered at the strikethrough price on
09-03-2026

$ 3.39 USD

Add to Wish List

The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.

Vargas Ignition Coil Kit (Blue) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309599

Part#: VTT-COIL-B58-BLU

Ships in 10 Business Days

Sale - Save 15% $ 220.99

This product was last offered at the strikethrough price on
09-03-2026

$ 187.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 220.99

This product was last offered at the strikethrough price on
09-03-2026

$ 187.84 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Vargas Billet CNC Valve Cover - Black - BMW B58 TU & Toyota A90/91 Su...

For vehicles with TU (Technical Update) engine variant

2X Entries Into Our F80 M3 Sweepstakes

T#:51813335

Part#: VTT-B58TU-BVC-BL

Ships in 10 Business Days

Sale - Save 15% $ 1,769.99

This product was last offered at the strikethrough price on
09-03-2026

$ 1,504.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,769.99

This product was last offered at the strikethrough price on
09-03-2026

$ 1,504.49 USD

Add to Wish List

While the stock plastic cover looks uninspired and degrades over time, the VTT Billet cover serves as a centerpiece for any high-end engine bay.

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

Sale - Save 15% $ 99.99

This product was last offered at the strikethrough price on
09-03-2026

$ 84.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 99.99

This product was last offered at the strikethrough price on
09-03-2026

$ 84.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

2X Entries Into Our F80 M3 Sweepstakes

T#:52129707

Part#: VTT-FAB-064

Ships in 10 Business Days

Sale - Save 15% $ 49.99

This product was last offered at the strikethrough price on
09-03-2026

$ 42.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 49.99

This product was last offered at the strikethrough price on
09-03-2026

$ 42.49 USD

Add to Wish List

The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

Sale - Save 15% $ 41.99

This product was last offered at the strikethrough price on
09-03-2026

$ 35.69 USD

Add to Wish List

Qty

Sale - Save 15%

$ 41.99

This product was last offered at the strikethrough price on
09-03-2026

$ 35.69 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW Z Series G29 (2019+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results