Please ensure your correct model is selected
Known by various names such as guide mount or front strut support, this component plays a pivotal role in maintaining the tranquility of your vehicle's suspension. Over time, wear and tear can cause suspension squeaks or unsettling clunking noises, emphasizing the importance of this part for a peaceful driving experience.
What sets this guide mount apart is its versatility, as it can be utilized on both the passenger and driver sides of your vehicle. When the spring and strut are compressed and locked, exposing the end thread of the strut, this guide mount securely attaches to the top of the strut, ensuring a reliable and noise-free suspension system.
For the best results, professional installation is highly recommended, guaranteeing not only a quieter ride but also the long-lasting performance of this critical component.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.
With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.
Features:
Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"
These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.
This product was last offered at the strikethrough price on
04-23-2026
Experience improved suspension performance with the essential guide mount, also referred to as the front strut support. As your vehicle ages, wear and tear can lead to annoying suspension squeaks or clunking noises. Replacing this part can effectively eliminate these issues and restore your suspension's functionality.
Notably, the same guide mount is compatible with both the passenger and driver sides, providing a versatile solution for your vehicle.
For a seamless upgrade, professional installation is recommended. Additionally, don't overlook the replacement of the center cover cap to ensure comprehensive enhancement of your suspension system.
Enhance your vehicle's suspension and enjoy a smoother ride with this guide mount.
M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.
Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.
Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.
If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.
Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.
This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.
The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.
We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.
Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.
Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.
The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).
If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!
Please note:
MINI R53 R56 Front Stabilizer End Link - Priced Each is essential for maintaining optimal suspension performance by connecting the sway bar to the front strut assembly. This stabilizer end link ensures that your MINI adapts effectively to road conditions, providing precise control and reducing the risk of play in the joints. Over time, these links may develop wear, leading to clunking noises and decreased handling. Replacing worn stabilizer end links restores the integrity of your suspension, improving ride quality and stability. This part is necessary for each front wheel and is compatible with vehicles produced from 03/2002.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Is your Mini experiencing a noticeable bump or clunk in the steering when turning sharply or driving over bumps? The culprit is likely the outer ball joint. Replace it with this essential kit to restore tight steering and suspension, reducing tire cupping. Specifically critical for Minis, this kit includes a bracket with the ball joint, along with a washer nut that requires replacement with a molded lock washer.
Enhance your MINI's performance and handling with NM Engineering Adjustable Rear Sway Bar Links. These high-quality links are designed to optimize your driving experience. Say goodbye to the factory plastic links that might not meet the demands of your upgraded anti-sway bar. NM Engineering's All-Metal Sway Bar Links offer superior performance and durability.
The NM Engineering Sway Bar Links are a significant improvement over factory plastic links. They offer the following benefits:
Upgrade your MINI's suspension and experience improved handling and control with NM Engineering Adjustable Rear Sway Bar Links.
This product was last offered at the strikethrough price on
07-23-2026
Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.
Enhance your MINI's performance with the NM RSα progressive rate spring kits, delivering a more responsive ride, improved handling, and a lowered ride height. These springs are engineered with precise spring rates and manufacturing methods, offering an elevated motoring experience.
For those who've owned or still own older-generation MINIs, the NM 22mm Solid Rear Anti Sway Bar is a game-changer. It's the ultimate solution for managing body roll in your MINI, significantly enhancing handling and steering input. In fact, it can provide performance improvements on par with, if not better than, installing lowering springs or coilovers.
Introducing the NM Engineering GT Rear Sway Bar in 25mm, now available to take your MINI's performance to the next level. This upgrade is perfect for aggressive urban driving, canyon carving, and track or autocross applications.
Note: It is highly recommended to use the NM Engineering Sway Bar Link kit with the GT Sway Bar for optimal performance.
This product was last offered at the strikethrough price on
03-19-2026
This product was last offered at the strikethrough price on
03-19-2026
Strengthen your BMW's chassis with NM Engineering’s Upper Tie-Bar, meticulously designed to fortify the exceptional MINI Cooper chassis. This installation effectively minimizes fore and aft, as well as side-to-side chassis flex during spirited driving, reducing undesired geometry/alignment changes. Experience improved steering response and superior handling with this exceptional addition.
ALL Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T models
**Works with or without DDC factory suspension option.
MINI F55 to F57 Billet Rear Sway Bar Clamp Kit With Grease Fitting - 22mm offers a superior upgrade from the factory plastic clamps. Designed by NM Engineering, this kit enhances both performance and convenience.
MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.
M7 Speed introduces a unique suspension product for the popular Generation 1 MINI Cooper models R50 through R53. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and this product is great for Rally Cross.
Engineered to convert the mild-mannered MINI into a more capable and versatile daily driver, this kit is perfect for spirited adventure motoring, weekend overlanding, living off the grid, or navigating pothole-riddled urban streets. The M7 Speed 2" Lift Kit lifts the MINI 2" higher, plus an additional lift from larger diameter tires (up to an extra 1.5"). No additional modifications are required—just bolt it in, realign, and enjoy! Enhance your MINI with aftermarket wheels and larger tires for a more durable, practical, and enjoyable vehicle.
M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Known for exceptional customer service and product innovation, the company is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. M7 Speed is located in Mooresville, North Carolina, also known as Race City USA.
Experience go-kart-like performance in your MINI Cooper Countryman and Paceman with the NM Engineering 22mm Rear Sway Bar. Unlike competitors, NM Engineering's sway bar is meticulously crafted from a single solid piece of mandrel-bent material with forged ends. This design ensures exceptional rigidity and optimal torsion transfer throughout the straight section of the bar. The kit also includes Aluminum Billet 7075-T6 mounting brackets equipped with grease fittings for effortless maintenance.
Elevate your driving experience with the NM Engineering 22mm Rear Sway Bar.
Crafted with a mandrel-bent chromoly heavy-wall tube, the NM Eng Anti Sway Bar ensures consistent diameter for precise torsion motion. Its forged ends with two adjustment mounting holes, billet 7075-T6 aerospace-grade sway bar bracket, 90° Zerk fitting for easy re-greasing, and graphite impregnated urethane bushing ensure durability and performance. The glossy blue powder-coat finish and 3-way adjustable preload make it ideal for aggressive urban driving, canyon carving, and track/autocross use.
Please note: The NM Engineering Sway Bar Link kit is recommended for optimal performance when used with the GT Sway Bar.
MINI F55 F56 F57 NM Billet Aluminum Tie-Bar – Blue enhances the rigidity of the MINI Cooper chassis, providing superior handling and steering response. Designed to minimize chassis flex during aggressive driving, this tie-bar helps maintain alignment and geometry, resulting in a more precise driving experience.
Compatible with all Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T, and works with or without the DDC factory suspension option.
This product was last offered at the strikethrough price on
07-08-2026
MINI R53 Loaded Front Strut - Front Right offers a convenient solution for replacing your front strut, spring, and strut mount with a pre-assembled unit. This fully assembled strut assembly eliminates the need for special disassembling tools, allowing for a quick and easy replacement using standard hand tools.
M7 Speed proudly introduces a unique suspension product for the popular Generation 2 MINI Cooper models R55 through R59. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and they are great for Rally Cross.
Engineered to transform the mild-mannered MINI into a more capable and versatile daily driver, this product is perfect for today’s lifestyle. Whether it's for spirited adventure motoring, weekend overlanding, living off the grid, or tackling pothole-riddled urban streets, the M7 Speed 2" Lift Kit makes it possible. By installing this lift kit, the MINI is elevated by 2 inches, plus an additional lift from larger diameter tires (up to an extra 1.5 inches). No additional modifications are required—simply bolt it in, perform a realignment, and enjoy! Add aftermarket wheels and larger tires to create a unique, durable, and practical vehicle that everyone will love.
The M7 Speed Stage 1 Kit includes everything needed for the transformation. This kit features precision-fabricated lift blocks and a set of MAXX-G heavy-duty adjustable front sway bar links. These shorter links are necessary to prevent suspension bind that can occur with stock-length sway bar links.
M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Renowned for exceptional customer service and product innovation, M7 Speed is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, also known as Race City USA, M7 Speed is at the epicenter of North American motorsports.
Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.
This product was last offered at the strikethrough price on
07-18-2026
MINI R53 Loaded Front Left Strut offers a convenient, pre-assembled solution for replacing your front strut, spring, and strut mount. This fully assembled unit eliminates the need for special disassembling tools, allowing for a quick and straightforward installation with standard hand tools.
Upgrade your MINI Countryman or Paceman with the Stage 1 Bundle from M7 Speed, combining industry-leading suspension components for ultimate performance. This bundle includes M7's solid billet aluminum lift kit and MAXX-G adjustable sway bar links, designed specifically for the R60 Countryman and R61 Paceman models. Enjoy enhanced road clearance, improved cornering performance, and easy installation with this comprehensive bundle.
Upgrade your Mini's front top strut mounts with the K-MAC ultimate design. These mounts offer separate Camber and Caster adjustment, ensuring precise alignment even under load. Made from high-grade aircraft aluminum, they are durable and lightweight. With K-MAC's patented system, adjustments are quick and easy, allowing you to switch between Street and Race settings in just 30 seconds. The design also features heavy-duty centers encased in elastomer for extended life and minimal stack height.
Enhance your MINI's handling by stiffening its chassis with the newly redesigned M7 Rear Chassis Brace. This upgrade is crucial for maximizing tire grip, allowing your suspension components—such as springs, shocks, and sway bars—to function optimally and keep your tires in better contact with the ground, resulting in improved grip.
Upgrade your MINI's chassis with the M7 Rear Chassis Brace and experience a significant improvement in grip and handling.
Reinforce your MINI Cooper's chassis and elevate its performance with NM Engineering's Upper Tie-Bar. This innovative solution effectively reduces fore and aft, as well as side-to-side chassis flex during spirited driving, resulting in improved geometry and alignment. The outcome is enhanced steering response and superior handling.
Compatible with ALL Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T models, this NM Engineering bar is built for excellence. Its mounting bases and tube ends are meticulously machined from solid 6061-T6 aluminum billets, offering a robust alternative to cheap welded sheet metal components. Crafted from 1" round 6061-T6 aluminum tubing with a 1/4" thick wall, this bar strikes the perfect balance between stiffness and weight. Unlike single-bolt designs, NM Engineering's solution utilizes two bolts to firmly secure the tube end to the mounting base, preventing pivoting and skewing.
Key Features:
This product was last offered at the strikethrough price on
05-04-2026
This product was last offered at the strikethrough price on
04-06-2026
Enhance your Mini's performance and cornering capabilities with M7 MAXX-G Adjustable Swaybar Endlinks. Designed for both lowered and raised Minis, these endlinks offer numerous benefits including symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance. The forged and heat-treated alloy steel housings with sealed ball stud and socket design ensure durability and reliability even during aggressive driving. The adjustable length allows for precise chassis tuning and optimal grip and balance. Made in the USA, these endlinks are a must-have upgrade for any Mini enthusiast.
Upgrade your Mini's suspension with M7 MAXX-G Adjustable Swaybar Endlinks for optimal performance on the road or track.
MAXX-G Adjustable Suspension Links, designed to add bind-free travel and straightforward camber adjustments to the rear suspension of any MINI. These links feature a solid aluminum 1" hex adjuster sleeve with opposing 3/4" left-hand and right-hand threads at each end, allowing effortless camber adjustment. The exclusive Hybrid Polymer MonoBall (HPMB) link end, a groundbreaking design in the industry, combines the benefits of a rod end for suspension movement with the vibration isolation and durability of a urethane bushing.
